Featured Products
40W to 960W, Single/Three Phase Silverline Series with Power Boost 3-phase units SL10 & SL20 offer a choice of over...
PIANO Series DIN Rail Power Supply With the new PIANO series, PULS-quality DIN Rail power supplies are now availabl...
Dimension Q Series The Q-Series DIN rail power supplies from PULS are small in size yet offer high efficiency thank...
50W MiniLine Series with Screw Terminals Input frequency range 47-63Hz Fully regulated output Permanent 25% extra power at 45° Overload & short...
Dimension Q Series The Q-Series DIN rail power supplies from PULS are small in size yet offer high efficien...
The CP-Series, part of the DIMENSION power supply family are cost optimized without compromising quality, reliability and performance. The CP10.2...
15W to 100W, Switch Mode, MiniLine Series Miniature size and lightweight Quick and easy mounting onto 35mm DIN-rail...
15W to 100W, Switch Mode, MiniLine Series Miniature size and lightweight Quick and easy mounting onto 35mm DIN-rail Spring clamp terminals 72W a...
Dimension C-Series - Puls Power Supplies The C-Series DIN Rail power supplies are affordable basic units wh...
Dimension C-Series - Puls Power Supplies The C-Series DIN Rail power supplies are affordable basic units which offe...
Dimension Q Series The Q-Series DIN rail power supplies from PULS are small in size yet offer high efficiency thank...
The YR20.242 is a redundancy module, which can be used to build 1+1 and N+1 redundant systems. It is equipped with two input channels, which can...
Popular Categories For PULS
Categories For PULS
Popular Items
Popular items
SLR10.100, PULS
40W to 960W, Single/Three Phase Silverline Series with Power Boost
3-phase units SL10 & SL20 offer a choice of overload response. In FUSE mode, in the event of an overload the unit switches off, in CONTINUOUS mode the unit will offer up to 80% more current at a reduced output power
Integral input fuse; electronic output protection
Option available for operating in parallel using jumpers
Output LED indication
Patented quick and easy assembly on to DIN rail
Power boost feature. The unit delivers a higher current for brief periods with no loss in output voltage. When the load continues beyond this period the PULS overload design takes over, reducing the voltage
Permanent 25% extra power @ >45°C
Note
* = Auto range.
Power de-rating @ +60 to +70°C.
Approvals
UL/UL Listed for Canada
Popular items
PIC120.242C, PULS
PIANO Series DIN Rail Power Supply
With the new PIANO series, PULS-quality DIN Rail power supplies are now available for even the most cost-oriented user. Through an innovative approach, the intrinsic properties of a PULS power supply have now been introduced into a product that also has significant price advantages.
Despite low-cost requirements, an MTBF of more than 1.4 million hours and efficiencies of 90.5% to 95.2% have been achieved. This innovation was made possible by a clever single-board design, cost-saving polycarbonate housing and a design team that was focused on an intelligent design for manufacturability.
Features and Benefits
DC-OK signal with relay (Except PIC120.242C)
Operational temperature range of up to 55°C (without derating)
Large input and output terminals all within a light and compact housing
Efficiency between 90.5 and 95.2% at 230 V
Made from high quality polycarbonate
High service lifetime
High reliability MTBF (Mean Time Between Failures)
Light and compact
Single board design increasing processing reliability
Approvals
PIANO DIN Rail power supplies meet the following standards and approvals:
IEC / UL 60950-1
UL 508
EMC Emission EN 55011/022 Class B
EMC IEC / EN 61000-6-1 / 61000-6-2 / 61000-6-4
Degree of pollution IEC 62103: 2
Mechanical Shock IEC 60068-2-27: 30 g 6 ms, 11 ms 20 g
Vibration IEC 60068-2-6: 2 g
Popular items
QS3.241, PULS
Dimension Q Series
The Q-Series DIN rail power supplies from PULS are small in size yet offer high efficiency thanks to novel design details and synchronous rectification. With short-term peak power capability of 150% and built-in large sized output capacitors, these features help start motors, charge capacitors and absorb reverse energy and often allow a unit of a lower wattage class to be used. High immunity to transients and power surges as well as low electromagnetic emission make these PSU,s usable in nearly every environment possible. The integrated output power manager, a wide range input voltage design and virtually no input inrush current make installation and usage simple. The Q-Series power supplies diagnostics are easy due to the dry DC-ok contact, a green DC-ok LED and red overload LED. Unique quick-connect spring-clamp terminals allow a safe and fast installation and a large international approval package for a variety of applications makes these PSU's suitable for nearly every situation.
Single-phase or three-phase units from 80 to 960W
Active power factor correction
Minimal inrush current
50% power reserves for typ. 4s controlled by an intelligent power manager
Quick-connect spring-clamp terminals
DC-ok LED and overload LED
DC-ok relay contact
DC Input from 88-375V for single phase
Active filtering of input transients
Short term operation down to 60Vac and up to 300Vac
Parallel and serial use
Standards
IEC, UL, EN, SELV
Popular items
ML50.111, PULS
50W MiniLine Series with Screw Terminals
Input frequency range 47-63Hz
Fully regulated output
Permanent 25% extra power at 45°
Overload & short circuit protection
Output LED indication
Paralleling capability
Note
Power de-rating @ +60 to +70°C.
Standards
UL, EN, CSA, CB
Popular items
QS20.481, PULS
Dimension Q Series
The Q-Series DIN rail power supplies from PULS are small in size yet offer high efficiency thanks to novel design details and synchronous rectification. With short-term peak power capability of 150% and built-in large sized output capacitors, these features help start motors, charge capacitors and absorb reverse energy and often allow a unit of a lower wattage class to be used. High immunity to transients and power surges as well as low electromagnetic emission make these PSU,s usable in nearly every environment possible. The integrated output power manager, a wide range input voltage design and virtually no input inrush current make installation and usage simple. The Q-Series power supplies diagnostics are easy due to the dry DC-ok contact, a green DC-ok LED and red overload LED. Unique quick-connect spring-clamp terminals allow a safe and fast installation and a large international approval package for a variety of applications makes these PSU's suitable for nearly every situation.
Single-phase or three-phase units from 80 to 960W
Active power factor correction
Minimal inrush current
50% power reserves for typ. 4s controlled by an intelligent power manager
Quick-connect spring-clamp terminals
DC-ok LED and overload LED
DC-ok relay contact
DC Input from 88-375V for single phase
Active filtering of input transients
Short term operation down to 60Vac and up to 300Vac
Parallel and serial use
Standards
IEC, UL, EN, SELV
Popular items
ML30.101, PULS
15W to 100W, Switch Mode, MiniLine Series
Miniature size and lightweight
Quick and easy mounting onto 35mm DIN-rail
Spring clamp terminals
72W and 100W meet PFC standard EN61000-3-2
Adjustable output voltage
Overload and short circuit protected
Output LED indicator
Suitable for use in harsh environment
Note
* = Auto range.
** = Preset voltage with jumper fitted.
Power de-rating @ +50 to +70°C.
Approvals
UL/UL Listed for Canada
Standards
EN60950, UL508, CSA22-2 No. 950-M90, EN50178
Approvals
UL/cUL Recognised; CSA Certified
Standards
UL, EN, CSA, CB
Popular items
ML30.106, PULS
15W to 100W, Switch Mode, MiniLine Series
Miniature size and lightweight
Quick and easy mounting onto 35mm DIN-rail
Spring clamp terminals
72W and 100W meet PFC standard EN61000-3-2
Adjustable output voltage
Overload and short circuit protected
Output LED indicator
Suitable for use in harsh environment
Note
* = Auto range.
** = Preset voltage with jumper fitted.
Power de-rating @ +50 to +70°C.
Approvals
UL/UL Listed for Canada
Standards
EN60950, UL508, CSA22-2 No. 950-M90, EN50178
Approvals
UL/cUL Recognised; CSA Certified
Standards
UL, EN, CSA, CB
Popular items
CP20.241-R2, PULS
The CP-Series, part of the DIMENSION power supply family are cost optimized without compromising quality, reliability and performance. The CP10.241-R2 units include a decoupling MOSFET for building 1+1 or n+1 redundant power supply systems without the need of external redundancy modules. These redundancy power supplies come with plug connector terminals which allow replacement on an active application. The most outstanding features of these units are high efficiency, electronic inrush current limitation, active PFC and the wide operational temperature range.
AC 100-240V Wide-range Input
Width only 39mm
Built-in Decoupling Mosfet for 1+1 and n+1 Redundancy
Efficiency up to 94.7%
20% Output Power Reserves
Safe HiccupPLUS Overload Mode
Easy Fuse Breaking – 3 times nominal current for 12ms
Active Power Factor Correction (PFC)
Minimal Inrush Current Surge
Full Power Between -25°C and +60°C
Popular items
CPS20.241, PULS
Dimension C-Series - Puls Power Supplies
The C-Series DIN Rail power supplies are affordable basic units which offer an alternative to the feature-rich Q-Series. The same standards apply to the C-Series Puls power supplies as to all other PULS products in terms of quality. They are reliable, easy to operate, have a small overall size and generous power reserves. In the 120W class, the C-Series power supplies are even smaller than the Q Series and yet are every bit as durable. This power supply has a specified life expectancy of the electrolytic capacitor of 50,000 hours. The guaranteed power boost of +20% of the rated power is intended to ensure optimal adaptation to fluctuating loads. If the ambient temperature remains below 45°C or with forced ventilation, this performance is even specified for continuous loads. The units are equipped with automatic 115/230 V range switching for increased ease of operation and fault avoidance.
The units are available in special regional versions that cover either the 100 V to 120 V or 200 V to 240 V ranges. The C series Puls power supply supports regional applications and offers extra cost savings without sacrificing functionality.
Features and Benefits
Wide range auto select input
Minimal inrush current
20% Power reserves up to 45°C continuously allowed
Large screw terminals
CS10.242 has power factor correction to EN61000-3-2
DC-ok LED
Cost effective
Note
Power de-rating @ +60 to +70°C.
Standards
UL60950-1, UL508, IEC60950-1
Approvals
UL Listed
Standards
IEC, UL, EN, SELV
Popular items
CP10.121, PULS
Dimension CP-Series Power Supplies
The Dimension CP-Series from PULS are medium priced power supplies that do not compromise quality, reliability and performance. They offer high efficiency, advanced inrush current limitation, active PFC and a wide operational temperature range.
The CP10 power supplies include all the essential basic functions. They have a power reserve of 20%, which can be used continuously at temperatures up to +45°C. They can also deliver three times the nominal output current for at least 12 ms to help trip fuses on faulty output branches.
These DIN Rail power supplies are suitable for various situations thanks to their high immunity to transients and power surges and low electromagnetic emission. They also have a shut-down input, a DC-OK relay contact and a large international approval package.
Features and Benefits
Wide range input, 100 to 240 V ac
Width only 39 mm
Excellent partial load efficiency
20% output power reserves
Safe HiccupPLUS overload mode
Active power factor correction (PFC)
Minimal inrush current surge
Full power between -25°C and +60°C
DC-OK relay contact
Meets ITE, ATEX, Class I Div2 and SEMI F47 Requirements
3-year warranty
RoHS and Reach compliant
Applications
The Dimension CP-Series power supplies are intended for professional use in industrial control, office, communication, and instrumentation equipment. Designed to be installed in an enclosure.
Approvals
CE, IECEE, cULus, cSAus, ATEX, IECEX, GL.
Sorry
Your request could not be completed at this time
Popular items
CS10.241, PULS
Dimension C-Series - Puls Power Supplies
The C-Series DIN Rail power supplies are affordable basic units which offer an alternative to the feature-rich Q-Series. The same standards apply to the C-Series Puls power supplies as to all other PULS products in terms of quality. They are reliable, easy to operate, have a small overall size and generous power reserves. In the 120W class, the C-Series power supplies are even smaller than the Q Series and yet are every bit as durable. This power supply has a specified life expectancy of the electrolytic capacitor of 50,000 hours. The guaranteed power boost of +20% of the rated power is intended to ensure optimal adaptation to fluctuating loads. If the ambient temperature remains below 45°C or with forced ventilation, this performance is even specified for continuous loads. The units are equipped with automatic 115/230 V range switching for increased ease of operation and fault avoidance.
The units are available in special regional versions that cover either the 100 V to 120 V or 200 V to 240 V ranges. The C series Puls power supply supports regional applications and offers extra cost savings without sacrificing functionality.
Features and Benefits
Wide range auto select input
Minimal inrush current
20% Power reserves up to 45°C continuously allowed
Large screw terminals
CS10.242 has power factor correction to EN61000-3-2
DC-ok LED
Cost effective
Note
Power de-rating @ +60 to +70°C.
Standards
UL60950-1, UL508, IEC60950-1
Approvals
UL Listed
Standards
IEC, UL, EN, SELV
Popular items
QS10.481, PULS
Dimension Q Series
The Q-Series DIN rail power supplies from PULS are small in size yet offer high efficiency thanks to novel design details and synchronous rectification. With short-term peak power capability of 150% and built-in large sized output capacitors, these features help start motors, charge capacitors and absorb reverse energy and often allow a unit of a lower wattage class to be used. High immunity to transients and power surges as well as low electromagnetic emission make these PSU,s usable in nearly every environment possible. The integrated output power manager, a wide range input voltage design and virtually no input inrush current make installation and usage simple. The Q-Series power supplies diagnostics are easy due to the dry DC-ok contact, a green DC-ok LED and red overload LED. Unique quick-connect spring-clamp terminals allow a safe and fast installation and a large international approval package for a variety of applications makes these PSU's suitable for nearly every situation.
Single-phase or three-phase units from 80 to 960W
Active power factor correction
Minimal inrush current
50% power reserves for typ. 4s controlled by an intelligent power manager
Quick-connect spring-clamp terminals
DC-ok LED and overload LED
DC-ok relay contact
DC Input from 88-375V for single phase
Active filtering of input transients
Short term operation down to 60Vac and up to 300Vac
Parallel and serial use
Standards
IEC, UL, EN, SELV
New Items
New items
SLR10.100, PULS
40W to 960W, Single/Three Phase Silverline Series with Power Boost
3-phase units SL10 & SL20 offer a choice of overload response. In FUSE mode, in the event of an overload the unit switches off, in CONTINUOUS mode the unit will offer up to 80% more current at a reduced output power
Integral input fuse; electronic output protection
Option available for operating in parallel using jumpers
Output LED indication
Patented quick and easy assembly on to DIN rail
Power boost feature. The unit delivers a higher current for brief periods with no loss in output voltage. When the load continues beyond this period the PULS overload design takes over, reducing the voltage
Permanent 25% extra power @ >45°C
Note
* = Auto range.
Power de-rating @ +60 to +70°C.
Approvals
UL/UL Listed for Canada
New items
PIC120.242C, PULS
PIANO Series DIN Rail Power Supply
With the new PIANO series, PULS-quality DIN Rail power supplies are now available for even the most cost-oriented user. Through an innovative approach, the intrinsic properties of a PULS power supply have now been introduced into a product that also has significant price advantages.
Despite low-cost requirements, an MTBF of more than 1.4 million hours and efficiencies of 90.5% to 95.2% have been achieved. This innovation was made possible by a clever single-board design, cost-saving polycarbonate housing and a design team that was focused on an intelligent design for manufacturability.
Features and Benefits
DC-OK signal with relay (Except PIC120.242C)
Operational temperature range of up to 55°C (without derating)
Large input and output terminals all within a light and compact housing
Efficiency between 90.5 and 95.2% at 230 V
Made from high quality polycarbonate
High service lifetime
High reliability MTBF (Mean Time Between Failures)
Light and compact
Single board design increasing processing reliability
Approvals
PIANO DIN Rail power supplies meet the following standards and approvals:
IEC / UL 60950-1
UL 508
EMC Emission EN 55011/022 Class B
EMC IEC / EN 61000-6-1 / 61000-6-2 / 61000-6-4
Degree of pollution IEC 62103: 2
Mechanical Shock IEC 60068-2-27: 30 g 6 ms, 11 ms 20 g
Vibration IEC 60068-2-6: 2 g
New items
QS3.241, PULS
Dimension Q Series
The Q-Series DIN rail power supplies from PULS are small in size yet offer high efficiency thanks to novel design details and synchronous rectification. With short-term peak power capability of 150% and built-in large sized output capacitors, these features help start motors, charge capacitors and absorb reverse energy and often allow a unit of a lower wattage class to be used. High immunity to transients and power surges as well as low electromagnetic emission make these PSU,s usable in nearly every environment possible. The integrated output power manager, a wide range input voltage design and virtually no input inrush current make installation and usage simple. The Q-Series power supplies diagnostics are easy due to the dry DC-ok contact, a green DC-ok LED and red overload LED. Unique quick-connect spring-clamp terminals allow a safe and fast installation and a large international approval package for a variety of applications makes these PSU's suitable for nearly every situation.
Single-phase or three-phase units from 80 to 960W
Active power factor correction
Minimal inrush current
50% power reserves for typ. 4s controlled by an intelligent power manager
Quick-connect spring-clamp terminals
DC-ok LED and overload LED
DC-ok relay contact
DC Input from 88-375V for single phase
Active filtering of input transients
Short term operation down to 60Vac and up to 300Vac
Parallel and serial use
Standards
IEC, UL, EN, SELV
New items
ML50.111, PULS
50W MiniLine Series with Screw Terminals
Input frequency range 47-63Hz
Fully regulated output
Permanent 25% extra power at 45°
Overload & short circuit protection
Output LED indication
Paralleling capability
Note
Power de-rating @ +60 to +70°C.
Standards
UL, EN, CSA, CB
New items
QS20.481, PULS
Dimension Q Series
The Q-Series DIN rail power supplies from PULS are small in size yet offer high efficiency thanks to novel design details and synchronous rectification. With short-term peak power capability of 150% and built-in large sized output capacitors, these features help start motors, charge capacitors and absorb reverse energy and often allow a unit of a lower wattage class to be used. High immunity to transients and power surges as well as low electromagnetic emission make these PSU,s usable in nearly every environment possible. The integrated output power manager, a wide range input voltage design and virtually no input inrush current make installation and usage simple. The Q-Series power supplies diagnostics are easy due to the dry DC-ok contact, a green DC-ok LED and red overload LED. Unique quick-connect spring-clamp terminals allow a safe and fast installation and a large international approval package for a variety of applications makes these PSU's suitable for nearly every situation.
Single-phase or three-phase units from 80 to 960W
Active power factor correction
Minimal inrush current
50% power reserves for typ. 4s controlled by an intelligent power manager
Quick-connect spring-clamp terminals
DC-ok LED and overload LED
DC-ok relay contact
DC Input from 88-375V for single phase
Active filtering of input transients
Short term operation down to 60Vac and up to 300Vac
Parallel and serial use
Standards
IEC, UL, EN, SELV
New items
ML30.101, PULS
15W to 100W, Switch Mode, MiniLine Series
Miniature size and lightweight
Quick and easy mounting onto 35mm DIN-rail
Spring clamp terminals
72W and 100W meet PFC standard EN61000-3-2
Adjustable output voltage
Overload and short circuit protected
Output LED indicator
Suitable for use in harsh environment
Note
* = Auto range.
** = Preset voltage with jumper fitted.
Power de-rating @ +50 to +70°C.
Approvals
UL/UL Listed for Canada
Standards
EN60950, UL508, CSA22-2 No. 950-M90, EN50178
Approvals
UL/cUL Recognised; CSA Certified
Standards
UL, EN, CSA, CB
New items
ML30.106, PULS
15W to 100W, Switch Mode, MiniLine Series
Miniature size and lightweight
Quick and easy mounting onto 35mm DIN-rail
Spring clamp terminals
72W and 100W meet PFC standard EN61000-3-2
Adjustable output voltage
Overload and short circuit protected
Output LED indicator
Suitable for use in harsh environment
Note
* = Auto range.
** = Preset voltage with jumper fitted.
Power de-rating @ +50 to +70°C.
Approvals
UL/UL Listed for Canada
Standards
EN60950, UL508, CSA22-2 No. 950-M90, EN50178
Approvals
UL/cUL Recognised; CSA Certified
Standards
UL, EN, CSA, CB
New items
CP20.241-R2, PULS
The CP-Series, part of the DIMENSION power supply family are cost optimized without compromising quality, reliability and performance. The CP10.241-R2 units include a decoupling MOSFET for building 1+1 or n+1 redundant power supply systems without the need of external redundancy modules. These redundancy power supplies come with plug connector terminals which allow replacement on an active application. The most outstanding features of these units are high efficiency, electronic inrush current limitation, active PFC and the wide operational temperature range.
AC 100-240V Wide-range Input
Width only 39mm
Built-in Decoupling Mosfet for 1+1 and n+1 Redundancy
Efficiency up to 94.7%
20% Output Power Reserves
Safe HiccupPLUS Overload Mode
Easy Fuse Breaking – 3 times nominal current for 12ms
Active Power Factor Correction (PFC)
Minimal Inrush Current Surge
Full Power Between -25°C and +60°C
New items
CPS20.241, PULS
Dimension C-Series - Puls Power Supplies
The C-Series DIN Rail power supplies are affordable basic units which offer an alternative to the feature-rich Q-Series. The same standards apply to the C-Series Puls power supplies as to all other PULS products in terms of quality. They are reliable, easy to operate, have a small overall size and generous power reserves. In the 120W class, the C-Series power supplies are even smaller than the Q Series and yet are every bit as durable. This power supply has a specified life expectancy of the electrolytic capacitor of 50,000 hours. The guaranteed power boost of +20% of the rated power is intended to ensure optimal adaptation to fluctuating loads. If the ambient temperature remains below 45°C or with forced ventilation, this performance is even specified for continuous loads. The units are equipped with automatic 115/230 V range switching for increased ease of operation and fault avoidance.
The units are available in special regional versions that cover either the 100 V to 120 V or 200 V to 240 V ranges. The C series Puls power supply supports regional applications and offers extra cost savings without sacrificing functionality.
Features and Benefits
Wide range auto select input
Minimal inrush current
20% Power reserves up to 45°C continuously allowed
Large screw terminals
CS10.242 has power factor correction to EN61000-3-2
DC-ok LED
Cost effective
Note
Power de-rating @ +60 to +70°C.
Standards
UL60950-1, UL508, IEC60950-1
Approvals
UL Listed
Standards
IEC, UL, EN, SELV
New items
CP10.121, PULS
Dimension CP-Series Power Supplies
The Dimension CP-Series from PULS are medium priced power supplies that do not compromise quality, reliability and performance. They offer high efficiency, advanced inrush current limitation, active PFC and a wide operational temperature range.
The CP10 power supplies include all the essential basic functions. They have a power reserve of 20%, which can be used continuously at temperatures up to +45°C. They can also deliver three times the nominal output current for at least 12 ms to help trip fuses on faulty output branches.
These DIN Rail power supplies are suitable for various situations thanks to their high immunity to transients and power surges and low electromagnetic emission. They also have a shut-down input, a DC-OK relay contact and a large international approval package.
Features and Benefits
Wide range input, 100 to 240 V ac
Width only 39 mm
Excellent partial load efficiency
20% output power reserves
Safe HiccupPLUS overload mode
Active power factor correction (PFC)
Minimal inrush current surge
Full power between -25°C and +60°C
DC-OK relay contact
Meets ITE, ATEX, Class I Div2 and SEMI F47 Requirements
3-year warranty
RoHS and Reach compliant
Applications
The Dimension CP-Series power supplies are intended for professional use in industrial control, office, communication, and instrumentation equipment. Designed to be installed in an enclosure.
Approvals
CE, IECEE, cULus, cSAus, ATEX, IECEX, GL.
Sorry
Your request could not be completed at this time
New items
CS10.241, PULS
Dimension C-Series - Puls Power Supplies
The C-Series DIN Rail power supplies are affordable basic units which offer an alternative to the feature-rich Q-Series. The same standards apply to the C-Series Puls power supplies as to all other PULS products in terms of quality. They are reliable, easy to operate, have a small overall size and generous power reserves. In the 120W class, the C-Series power supplies are even smaller than the Q Series and yet are every bit as durable. This power supply has a specified life expectancy of the electrolytic capacitor of 50,000 hours. The guaranteed power boost of +20% of the rated power is intended to ensure optimal adaptation to fluctuating loads. If the ambient temperature remains below 45°C or with forced ventilation, this performance is even specified for continuous loads. The units are equipped with automatic 115/230 V range switching for increased ease of operation and fault avoidance.
The units are available in special regional versions that cover either the 100 V to 120 V or 200 V to 240 V ranges. The C series Puls power supply supports regional applications and offers extra cost savings without sacrificing functionality.
Features and Benefits
Wide range auto select input
Minimal inrush current
20% Power reserves up to 45°C continuously allowed
Large screw terminals
CS10.242 has power factor correction to EN61000-3-2
DC-ok LED
Cost effective
Note
Power de-rating @ +60 to +70°C.
Standards
UL60950-1, UL508, IEC60950-1
Approvals
UL Listed
Standards
IEC, UL, EN, SELV
New items
QS10.481, PULS
Dimension Q Series
The Q-Series DIN rail power supplies from PULS are small in size yet offer high efficiency thanks to novel design details and synchronous rectification. With short-term peak power capability of 150% and built-in large sized output capacitors, these features help start motors, charge capacitors and absorb reverse energy and often allow a unit of a lower wattage class to be used. High immunity to transients and power surges as well as low electromagnetic emission make these PSU,s usable in nearly every environment possible. The integrated output power manager, a wide range input voltage design and virtually no input inrush current make installation and usage simple. The Q-Series power supplies diagnostics are easy due to the dry DC-ok contact, a green DC-ok LED and red overload LED. Unique quick-connect spring-clamp terminals allow a safe and fast installation and a large international approval package for a variety of applications makes these PSU's suitable for nearly every situation.
Single-phase or three-phase units from 80 to 960W
Active power factor correction
Minimal inrush current
50% power reserves for typ. 4s controlled by an intelligent power manager
Quick-connect spring-clamp terminals
DC-ok LED and overload LED
DC-ok relay contact
DC Input from 88-375V for single phase
Active filtering of input transients
Short term operation down to 60Vac and up to 300Vac
Parallel and serial use
Standards
IEC, UL, EN, SELV
Don’t hesitate to ask questions for better clarification.