Featured Products
Fully Populated Consumer Unit MK Sentry introduce a new range of Populated Consumer Units. There are 3 new insulated surface mounted additions...
Switch Modules 10 Amp single pole two-way switch module For use only with Masterseal switch enclosures Note These switches do not have to be d...
13A Connection Units Fuse carrier has a worm effect screw which cannot be removed Padlockable fuse carrier enabling safe maintenance Switched...
10A Flush Mount Plateswitches 10 A rated switches 250Vac 1 gang version also available in "press" and intermediate types 1,2 and 3 gang switche...
White Straight Batten Holder Heat Resistant tails, live, neutral, loop-in and earth terminals All MK lampholders are heat resistant to category...
IP65 Weatherproof Enclosure Kits Weatherproof to IP65 Complete with neutral and earth terminal blocks Accepts up to 4 modules MK Series Enclos...
Graphite Switches Part M Compliant Part M covers the entry and use of all building structures and facilities by disabled people, whether visit...
Module Frames The frame is the integral part of the grid system that the modules clip into Supplied with 8888 MK Grid Plus A modular switc...
10A Flush Mount Plateswitches 10 A rated switches 250Vac 1 gang version also available in "press" and intermediate types 1,2 and 3 gang switche...
Euro Datacom Modules Snap fit modules for ease of installation Frontplates available as either 1 gang accepting up to 2 modules or 2 gang accept...
13A Graphite Switched Sockets Graphite plates with white rocker switches Part M Compliant Part M covers the entry and use of all building str...
13A Flush Mounting Non-standard SocketsFor use on installations requiring restricted access.Will only accept MK non-standard plug see stock no.19...
Popular Categories For MK
Popular Items
Popular items
56882BLK, MK
Switch Modules
10 Amp single pole two-way switch module
For use only with Masterseal switch enclosures
Note
These switches do not have to be derated when used with fluorescent or inductive loads.
Approvals
BS EN 60669-1: 2000
MK Masterseal Plus IP66
MK Masterseal Plus range of water tight accessories are specifically designed to provide power and control in environments heavily exposed to dust and powerful water jets. Grey units are ideally suited to harsh industrial, commercial and agricultural applications whilst the white version is designed for the food industry.
IP66 protection rating
Sealed in use with moulded plugs
Improved gasket and catch
Rear drill holes
Popular items
K954 ALM, MK
13A Connection Units
Fuse carrier has a worm effect screw which cannot be removed
Padlockable fuse carrier enabling safe maintenance
Switched or unswitched versions with cord outlet and neon indicator
Epoxy/polyester and metallic powder paint coating
Standards
BS 1363
MK Metalclad Plus
A comprehensive range of tough, impact resistant, surface mounted wiring devices. The products have been designed to suit a wide variety of applications in factories, workshops, plant rooms, warehouses, schools and hospitals as well as being ideal around the home in garages and sheds.
Outer casing is manufactured from tough mild steel with a scratch resistant paint finish
3-pin operated safety shutter on all sockets
Easy to install
Double pole switches on all products
Neutral contact makes first and breaks last for added safety
Minimum 3mm contact gap for safety switch isolation
Fuse carrier can be padlocked in open position for safe maintenance
Surface mounted sockets are supplied with back box; for flush mounting, a flush mount box will be required
Popular items
K7664SP, MK
Fully Populated Consumer Unit
MK Sentry introduce a new range of Populated Consumer Units. There are 3 new insulated surface mounted additions that come supplied pre fitted with switch Disconnector, RCDs, devices and necessary cabling. The populated units allow flexibility for protected and unprotected MCB or RCBO ways.
14 and 16 way flexible dual RCD Consumer Unit
Pre assembled with 100A switch, 2x63A RCDs & 6 MCBs (1x40A, 2x6A, 1x16A, 2x32A)
Insulated, surface mounted
Low profile design
Supplied with
712-7373
- 100A switch disconnector, 2 RCDs (63A), 10 MCBs (1x40A, 3x6A, 2x16A, 4x32A)
712-7379
- 100A switch disconnector, 3 RCDs (2x63A, 1x30mA), 6 MCBs (1x40A, 2x6A, 1x16A, 2x32A)
712-7382
- 100A switch disconnector, 1 RCD (63A), 6 MCBs, 2 RCBOs (14 MOD)
MK Series Enclosures & Accessories
The Sentry™ range of consumer unit enclosures from MK provides a flexible solution for residential, commercial and light industrial applications, where circuit protection is required. The modular design allows flexibility of configuration, ranging from simple MCB arrangements to more complex split loads.
Curved lines, low profile apperance and colour let the unit blend with its environment
Flush mounting available for neater installations
Opaque and downward opening lid conceals protective devices and unsightly labelling
Floating busbar systems gives maximum installation flexibility
Stacking options for larger installations
Selection Guide
Step 1
Determine the type of consumer unit configuration required. e.g Split Load, Dual
Tariff, Standard or combination of split load / dual tariff. For each Switch Disconnector or RCD to be used allow 2 modular ways.
Step 2
Determine the number of outgoing circuits required. e.g Cooker, Lighting, Ring Main
etc. For each circuit to be protected by an MCB or RCBO allow 1 modular way.
Step 3
Determine what control products are required. e.g Bell Transformer, Time Delay
Switch, contactors, timeswitches etc.
Step 4
Det...
Popular items
1174WHI, MK
White Straight Batten Holder
Heat Resistant tails, live, neutral, loop-in and earth terminals
All MK lampholders are heat resistant to category T2 of BS EN 61184 and are therefore capable of operation with lamp cap temperatures up to 210°C.
1174 WHI also incorporates heat resistant wires connecting the terminals in the base to the lampholder. It has terminals mounted in the base and knockouts which accommodate 3 x 2.5 mm2 cables and allow for off centre cable entries.
Approvals
BS EN 61184: 1997 T2 Rated
MK Ceiling Accessories
Popular items
K4871 WHI, MK
10A Flush Mount Plateswitches
10 A rated switches
250Vac
1 gang version also available in "press" and intermediate types
1,2 and 3 gang switches are two way
Antimicrobial properties which inhibit the growth of infectious diseases
Designed for use with neon locator (stock no.
222-7960
)
For surface mounting use stock no.
222-8086
Standards
BS3676 Pt.1 : 1989
Standards
BS3676 Pt.1 : 1989
Supplied with
8888
MK Logic Plus Flush Mounting
Stylish, quality, reliable and safe products that incorporate a host of design features which make the installers job easier and quicker. Logic Plus products are made from a high grade thermoset material which has an inherent antimicrobial property. In recent independent tests, the Logic Plus products were equal to, or exceeded, competitor Anti-Bac products when tested for resistance to MRSA, E-Coli, Salmonella and Klebsiella Pneumoniae.
Popular items
5702SP1, MK
IP65 Weatherproof Enclosure Kits
Weatherproof to IP65
Complete with neutral and earth terminal blocks
Accepts up to 4 modules
MK Series Enclosures & Accessories
The Sentry™ range of consumer unit enclosures from MK provides a flexible solution for residential, commercial and light industrial applications, where circuit protection is required. The modular design allows flexibility of configuration, ranging from simple MCB arrangements to more complex split loads.
Curved lines, low profile apperance and colour let the unit blend with its environment
Flush mounting available for neater installations
Opaque and downward opening lid conceals protective devices and unsightly labelling
Floating busbar systems gives maximum installation flexibility
Stacking options for larger installations
Selection Guide
Step 1
Determine the type of consumer unit configuration required. e.g Split Load, Dual
Tariff, Standard or combination of split load / dual tariff. For each Switch Disconnector or RCD to be used allow 2 modular ways.
Step 2
Determine the number of outgoing circuits required. e.g Cooker, Lighting, Ring Main
etc. For each circuit to be protected by an MCB or RCBO allow 1 modular way.
Step 3
Determine what control products are required. e.g Bell Transformer, Time Delay
Switch, contactors, timeswitches etc.
Step 4
Determine the number of spare modular ways required for future upgrades. For
each spare modular way select 1 Sentry blank module
Step 5
Now add together the total number of modular ways required.
Step 6
Choose the type and size most appropriate for
your requirements.
Popular items
K182 WHI, MK
Euro Datacom Modules
Snap fit modules for ease of installation
Frontplates available as either 1 gang accepting up to 2 modules or 2 gang accepting up to 4 modules and are compatible with modules from Krone, Mod Tap, AMP, AT& T, ITT Cannon and RW Data
Available in white finish or matt chrome to match the Albany range
White finish has antimicrobial properties which inhibit the growth of infectious diseases
Height 50mm
Note
Stock no.
340-7088
is only suitable for RG58, URM43, URM76 and Belden co-axial cables.
Standards
8888
MK Logic Plus Flush Mounting
Stylish, quality, reliable and safe products that incorporate a host of design features which make the installers job easier and quicker. Logic Plus products are made from a high grade thermoset material which has an inherent antimicrobial property. In recent independent tests, the Logic Plus products were equal to, or exceeded, competitor Anti-Bac products when tested for resistance to MRSA, E-Coli, Salmonella and Klebsiella Pneumoniae.
Popular items
K4872 WHI, MK
10A Flush Mount Plateswitches
10 A rated switches
250Vac
1 gang version also available in "press" and intermediate types
1,2 and 3 gang switches are two way
Antimicrobial properties which inhibit the growth of infectious diseases
Designed for use with neon locator (stock no.
222-7960
)
For surface mounting use stock no.
222-8086
Standards
BS3676 Pt.1 : 1989
Standards
BS3676 Pt.1 : 1989
Supplied with
8888
MK Logic Plus Flush Mounting
Stylish, quality, reliable and safe products that incorporate a host of design features which make the installers job easier and quicker. Logic Plus products are made from a high grade thermoset material which has an inherent antimicrobial property. In recent independent tests, the Logic Plus products were equal to, or exceeded, competitor Anti-Bac products when tested for resistance to MRSA, E-Coli, Salmonella and Klebsiella Pneumoniae.
Popular items
K4882 GRA, MK
Graphite Switches
Part M Compliant
Part M covers the entry and use of all building structures and facilities by disabled people, whether visiting, working or dwelling in them. This range of switches and socket outlets enables compliance with Part M, however the onus on following the regulations is with the specifier or contractor. One of the many recommendations is that there is a contrast of 30% Light Reflectance Value (LRV) between a frontplate and wall (white has an LRV of 100 and black 0). This range of switches and sockets has graphite frontplates for contrast to walls with an LRV of 70 or more.
Popular items
K3702, MK
Module Frames
The frame is the integral part of the grid system that the modules clip into
Supplied with
8888
MK Grid Plus
A modular switching and monitoring system.
The comprehensive range of modules includes switches, indicators, dimmers, secret key switches, and buzzer units, making it the ideal system for commercial and public building applications
Easy to fit and change, Grid Plus modules simply clip into place from the front of the mounting frame
Popular items
K1246 WHI, MK
13A Flush Mounting Non-standard SocketsFor use on installations requiring restricted access.Will only accept MK non-standard plug see stock no.199-9119Twin earth terminals for high integrity earthingAntimicrobial properties which inhibit the growth of infectious diseasesVoltage rating 250 VacUse backbox222-8109 or222-8115NoteThis product is provided with facilities for clean earth connection and is suitable for non standard plugs with T shaped earth pinStandardsBS1363 (Pt2: 1995)StandardsBS1363 (Pt2: 1995)Supplied with8888MK Logic Plus Flush MountingStylish, quality, reliable and safe products that incorporate a host of design features which make the installers job easier and quicker. Logic Plus products are made from a high grade thermoset material which has an inherent antimicrobial property. In recent independent tests, the Logic Plus products were equal to, or exceeded, competitor Anti-Bac products when tested for resistance to MRSA, E-Coli, Salmonella and Klebsiella Pneumoniae.
Popular items
K2757 GRA, MK
13A Graphite Switched Sockets
Graphite plates with white rocker switches
Part M Compliant
Part M covers the entry and use of all building structures and facilities by disabled people, whether visiting, working or dwelling in them. This range of switches and socket outlets enables compliance with Part M, however the onus on following the regulations is with the specifier or contractor. One of the many recommendations is that there is a contrast of 30% Light Reflectance Value (LRV) between a frontplate and wall (white has an LRV of 100 and black 0). This range of switches and sockets has graphite frontplates for contrast to walls with an LRV of 70 or more.
Sorry
Your request could not be completed at this time
New Items
New items
K7664SP, MK
Fully Populated Consumer Unit
MK Sentry introduce a new range of Populated Consumer Units. There are 3 new insulated surface mounted additions that come supplied pre fitted with switch Disconnector, RCDs, devices and necessary cabling. The populated units allow flexibility for protected and unprotected MCB or RCBO ways.
14 and 16 way flexible dual RCD Consumer Unit
Pre assembled with 100A switch, 2x63A RCDs & 6 MCBs (1x40A, 2x6A, 1x16A, 2x32A)
Insulated, surface mounted
Low profile design
Supplied with
712-7373
- 100A switch disconnector, 2 RCDs (63A), 10 MCBs (1x40A, 3x6A, 2x16A, 4x32A)
712-7379
- 100A switch disconnector, 3 RCDs (2x63A, 1x30mA), 6 MCBs (1x40A, 2x6A, 1x16A, 2x32A)
712-7382
- 100A switch disconnector, 1 RCD (63A), 6 MCBs, 2 RCBOs (14 MOD)
MK Series Enclosures & Accessories
The Sentry™ range of consumer unit enclosures from MK provides a flexible solution for residential, commercial and light industrial applications, where circuit protection is required. The modular design allows flexibility of configuration, ranging from simple MCB arrangements to more complex split loads.
Curved lines, low profile apperance and colour let the unit blend with its environment
Flush mounting available for neater installations
Opaque and downward opening lid conceals protective devices and unsightly labelling
Floating busbar systems gives maximum installation flexibility
Stacking options for larger installations
Selection Guide
Step 1
Determine the type of consumer unit configuration required. e.g Split Load, Dual
Tariff, Standard or combination of split load / dual tariff. For each Switch Disconnector or RCD to be used allow 2 modular ways.
Step 2
Determine the number of outgoing circuits required. e.g Cooker, Lighting, Ring Main
etc. For each circuit to be protected by an MCB or RCBO allow 1 modular way.
Step 3
Determine what control products are required. e.g Bell Transformer, Time Delay
Switch, contactors, timeswitches etc.
Step 4
Det...
New items
56882BLK, MK
Switch Modules
10 Amp single pole two-way switch module
For use only with Masterseal switch enclosures
Note
These switches do not have to be derated when used with fluorescent or inductive loads.
Approvals
BS EN 60669-1: 2000
MK Masterseal Plus IP66
MK Masterseal Plus range of water tight accessories are specifically designed to provide power and control in environments heavily exposed to dust and powerful water jets. Grey units are ideally suited to harsh industrial, commercial and agricultural applications whilst the white version is designed for the food industry.
IP66 protection rating
Sealed in use with moulded plugs
Improved gasket and catch
Rear drill holes
New items
K954 ALM, MK
13A Connection Units
Fuse carrier has a worm effect screw which cannot be removed
Padlockable fuse carrier enabling safe maintenance
Switched or unswitched versions with cord outlet and neon indicator
Epoxy/polyester and metallic powder paint coating
Standards
BS 1363
MK Metalclad Plus
A comprehensive range of tough, impact resistant, surface mounted wiring devices. The products have been designed to suit a wide variety of applications in factories, workshops, plant rooms, warehouses, schools and hospitals as well as being ideal around the home in garages and sheds.
Outer casing is manufactured from tough mild steel with a scratch resistant paint finish
3-pin operated safety shutter on all sockets
Easy to install
Double pole switches on all products
Neutral contact makes first and breaks last for added safety
Minimum 3mm contact gap for safety switch isolation
Fuse carrier can be padlocked in open position for safe maintenance
Surface mounted sockets are supplied with back box; for flush mounting, a flush mount box will be required
New items
K4871 WHI, MK
10A Flush Mount Plateswitches
10 A rated switches
250Vac
1 gang version also available in "press" and intermediate types
1,2 and 3 gang switches are two way
Antimicrobial properties which inhibit the growth of infectious diseases
Designed for use with neon locator (stock no.
222-7960
)
For surface mounting use stock no.
222-8086
Standards
BS3676 Pt.1 : 1989
Standards
BS3676 Pt.1 : 1989
Supplied with
8888
MK Logic Plus Flush Mounting
Stylish, quality, reliable and safe products that incorporate a host of design features which make the installers job easier and quicker. Logic Plus products are made from a high grade thermoset material which has an inherent antimicrobial property. In recent independent tests, the Logic Plus products were equal to, or exceeded, competitor Anti-Bac products when tested for resistance to MRSA, E-Coli, Salmonella and Klebsiella Pneumoniae.
New items
1174WHI, MK
White Straight Batten Holder
Heat Resistant tails, live, neutral, loop-in and earth terminals
All MK lampholders are heat resistant to category T2 of BS EN 61184 and are therefore capable of operation with lamp cap temperatures up to 210°C.
1174 WHI also incorporates heat resistant wires connecting the terminals in the base to the lampholder. It has terminals mounted in the base and knockouts which accommodate 3 x 2.5 mm2 cables and allow for off centre cable entries.
Approvals
BS EN 61184: 1997 T2 Rated
MK Ceiling Accessories
New items
5702SP1, MK
IP65 Weatherproof Enclosure Kits
Weatherproof to IP65
Complete with neutral and earth terminal blocks
Accepts up to 4 modules
MK Series Enclosures & Accessories
The Sentry™ range of consumer unit enclosures from MK provides a flexible solution for residential, commercial and light industrial applications, where circuit protection is required. The modular design allows flexibility of configuration, ranging from simple MCB arrangements to more complex split loads.
Curved lines, low profile apperance and colour let the unit blend with its environment
Flush mounting available for neater installations
Opaque and downward opening lid conceals protective devices and unsightly labelling
Floating busbar systems gives maximum installation flexibility
Stacking options for larger installations
Selection Guide
Step 1
Determine the type of consumer unit configuration required. e.g Split Load, Dual
Tariff, Standard or combination of split load / dual tariff. For each Switch Disconnector or RCD to be used allow 2 modular ways.
Step 2
Determine the number of outgoing circuits required. e.g Cooker, Lighting, Ring Main
etc. For each circuit to be protected by an MCB or RCBO allow 1 modular way.
Step 3
Determine what control products are required. e.g Bell Transformer, Time Delay
Switch, contactors, timeswitches etc.
Step 4
Determine the number of spare modular ways required for future upgrades. For
each spare modular way select 1 Sentry blank module
Step 5
Now add together the total number of modular ways required.
Step 6
Choose the type and size most appropriate for
your requirements.
New items
K4882 GRA, MK
Graphite Switches
Part M Compliant
Part M covers the entry and use of all building structures and facilities by disabled people, whether visiting, working or dwelling in them. This range of switches and socket outlets enables compliance with Part M, however the onus on following the regulations is with the specifier or contractor. One of the many recommendations is that there is a contrast of 30% Light Reflectance Value (LRV) between a frontplate and wall (white has an LRV of 100 and black 0). This range of switches and sockets has graphite frontplates for contrast to walls with an LRV of 70 or more.
New items
K3702, MK
Module Frames
The frame is the integral part of the grid system that the modules clip into
Supplied with
8888
MK Grid Plus
A modular switching and monitoring system.
The comprehensive range of modules includes switches, indicators, dimmers, secret key switches, and buzzer units, making it the ideal system for commercial and public building applications
Easy to fit and change, Grid Plus modules simply clip into place from the front of the mounting frame
New items
K4872 WHI, MK
10A Flush Mount Plateswitches
10 A rated switches
250Vac
1 gang version also available in "press" and intermediate types
1,2 and 3 gang switches are two way
Antimicrobial properties which inhibit the growth of infectious diseases
Designed for use with neon locator (stock no.
222-7960
)
For surface mounting use stock no.
222-8086
Standards
BS3676 Pt.1 : 1989
Standards
BS3676 Pt.1 : 1989
Supplied with
8888
MK Logic Plus Flush Mounting
Stylish, quality, reliable and safe products that incorporate a host of design features which make the installers job easier and quicker. Logic Plus products are made from a high grade thermoset material which has an inherent antimicrobial property. In recent independent tests, the Logic Plus products were equal to, or exceeded, competitor Anti-Bac products when tested for resistance to MRSA, E-Coli, Salmonella and Klebsiella Pneumoniae.
New items
K182 WHI, MK
Euro Datacom Modules
Snap fit modules for ease of installation
Frontplates available as either 1 gang accepting up to 2 modules or 2 gang accepting up to 4 modules and are compatible with modules from Krone, Mod Tap, AMP, AT& T, ITT Cannon and RW Data
Available in white finish or matt chrome to match the Albany range
White finish has antimicrobial properties which inhibit the growth of infectious diseases
Height 50mm
Note
Stock no.
340-7088
is only suitable for RG58, URM43, URM76 and Belden co-axial cables.
Standards
8888
MK Logic Plus Flush Mounting
Stylish, quality, reliable and safe products that incorporate a host of design features which make the installers job easier and quicker. Logic Plus products are made from a high grade thermoset material which has an inherent antimicrobial property. In recent independent tests, the Logic Plus products were equal to, or exceeded, competitor Anti-Bac products when tested for resistance to MRSA, E-Coli, Salmonella and Klebsiella Pneumoniae.
New items
K2757 GRA, MK
13A Graphite Switched Sockets
Graphite plates with white rocker switches
Part M Compliant
Part M covers the entry and use of all building structures and facilities by disabled people, whether visiting, working or dwelling in them. This range of switches and socket outlets enables compliance with Part M, however the onus on following the regulations is with the specifier or contractor. One of the many recommendations is that there is a contrast of 30% Light Reflectance Value (LRV) between a frontplate and wall (white has an LRV of 100 and black 0). This range of switches and sockets has graphite frontplates for contrast to walls with an LRV of 70 or more.
Sorry
Your request could not be completed at this time
New items
K1246 WHI, MK
13A Flush Mounting Non-standard SocketsFor use on installations requiring restricted access.Will only accept MK non-standard plug see stock no.199-9119Twin earth terminals for high integrity earthingAntimicrobial properties which inhibit the growth of infectious diseasesVoltage rating 250 VacUse backbox222-8109 or222-8115NoteThis product is provided with facilities for clean earth connection and is suitable for non standard plugs with T shaped earth pinStandardsBS1363 (Pt2: 1995)StandardsBS1363 (Pt2: 1995)Supplied with8888MK Logic Plus Flush MountingStylish, quality, reliable and safe products that incorporate a host of design features which make the installers job easier and quicker. Logic Plus products are made from a high grade thermoset material which has an inherent antimicrobial property. In recent independent tests, the Logic Plus products were equal to, or exceeded, competitor Anti-Bac products when tested for resistance to MRSA, E-Coli, Salmonella and Klebsiella Pneumoniae.
Don’t hesitate to ask questions for better clarification.