Mecmesin

Vice Grip Jaw The self'tightening vice grip jaw is recommended when testing a wide range of terminal sizes, as it grips the terminal palm rather than the terminal barrel; this also allows the testing of small connector pins and sockets. This accessory may also be fitted to the base of the stand to test double-ended samples. Note For details of a suitable force gauge see stock no. 460-1427 .

Compact Force Gauge (CFG+) Accurcay ±0.5% of full scale Peak hold in tension and compression Lightweight pastic case Overload warning Auto-off function Powered by 4 x AAA batteries RS232 output CE mark Supplied with Test hook, compression plate and short extension.

Basic Force Gauge A cost effective solution to accurate tensile and compression measurement, handheld or jig mountable. Large clear display & tough blue aluminium case Menu driven; displays N, kN gf, kgf, ozf & lbf Audible & visual overload indication Max and Peak readouts RS-232, Analogue & Mitutoyo data outputs Backlit display & auto power down function Invertable display for handheld or horizontal applications Full unit conversion of displayed value Overload warning with trend bar Diagnostic check of load cell Two rear M5 x 0.8 (5.5mm deep) tapped holes for machine mounting Internal stud thread M6 x 1.0 Temp shift @ zero load ±0.09% of full scale/°C RS-232 8 Data bits, 1 Start bit 1 Stop bit, No parity Analogue 2.5Vdc at zero load ±1.5Vdc FS (approx) Tension & Compression Power supply 5 x NiMH AAA batteries (also via charger unit) Battery Life 20 hours (approx) Output connector 15-way female D Dimensions H.202, W.77, D. 30.9mm Weight 500g Selection Guide Type N g kg oz lb 200N 200x0.05 20000x5 20x0.005 640x0.5 50x0.02 Supplied with 5 rechargeable NiMH batteries, mains charger unit, 1 x short extension rod, 1 x test hook, 1 x compression plate, calibration certificate, operating instructions and carry case.

Compact Force Gauge (CFG+) Accurcay ±0.5% of full scale Peak hold in tension and compression Lightweight pastic case Overload warning Auto-off function Powered by 4 x AAA batteries RS232 output CE mark

Compact Force Gauge (CFG+) Accurcay ±0.5% of full scale Peak hold in tension and compression Lightweight pastic case Overload warning Auto-off function Powered by 4 x AAA batteries RS232 output CE mark Supplied with Test hook, compression plate and short extension.

Vice Grip Jaw The self'tightening vice grip jaw is recommended when testing a wide range of terminal sizes, as it grips the terminal palm rather than the terminal barrel; this also allows the testing of small connector pins and sockets. This accessory may also be fitted to the base of the stand to test double-ended samples. Note For details of a suitable force gauge see stock no. 460-1427 .

Compact Force Gauge (CFG+) Accurcay ±0.5% of full scale Peak hold in tension and compression Lightweight pastic case Overload warning Auto-off function Powered by 4 x AAA batteries RS232 output CE mark Supplied with Test hook, compression plate and short extension.

Basic Force Gauge A cost effective solution to accurate tensile and compression measurement, handheld or jig mountable. Large clear display & tough blue aluminium case Menu driven; displays N, kN gf, kgf, ozf & lbf Audible & visual overload indication Max and Peak readouts RS-232, Analogue & Mitutoyo data outputs Backlit display & auto power down function Invertable display for handheld or horizontal applications Full unit conversion of displayed value Overload warning with trend bar Diagnostic check of load cell Two rear M5 x 0.8 (5.5mm deep) tapped holes for machine mounting Internal stud thread M6 x 1.0 Temp shift @ zero load ±0.09% of full scale/°C RS-232 8 Data bits, 1 Start bit 1 Stop bit, No parity Analogue 2.5Vdc at zero load ±1.5Vdc FS (approx) Tension & Compression Power supply 5 x NiMH AAA batteries (also via charger unit) Battery Life 20 hours (approx) Output connector 15-way female D Dimensions H.202, W.77, D. 30.9mm Weight 500g Selection Guide Type N g kg oz lb 200N 200x0.05 20000x5 20x0.005 640x0.5 50x0.02 Supplied with 5 rechargeable NiMH batteries, mains charger unit, 1 x short extension rod, 1 x test hook, 1 x compression plate, calibration certificate, operating instructions and carry case.

Compact Force Gauge (CFG+) Accurcay ±0.5% of full scale Peak hold in tension and compression Lightweight pastic case Overload warning Auto-off function Powered by 4 x AAA batteries RS232 output CE mark

Compact Force Gauge (CFG+) Accurcay ±0.5% of full scale Peak hold in tension and compression Lightweight pastic case Overload warning Auto-off function Powered by 4 x AAA batteries RS232 output CE mark Supplied with Test hook, compression plate and short extension.