Featured Products
eRA-ARDUINO-S900 easyRadio Shield for Arduino The LPRS eRA-ARDUINO-S900 shield allows Arduino processor boards to...
LPRS Whip Antennas, 434 - 915 MHz A range of rugged Whip Antennas from Low Power Radio Solutions covering t...
LPRS Whip Antennas, 434 - 915 MHz A range of rugged Whip Antennas from Low Power Radio Solutions covering the 433,...
The LPRS 5G cellular antenna is also compatible with 2G/3G and 4G applications. Waterproof IP67 rated. RoHS Compliant Operating temp is -40°C ∼+8...
The LPRS ceramic chip antenna is designed for use within the ISM 2.4GHz frequency bands, covering frequencies from 2400MHz ∼ 2500MHz.Perfect for...
The LPRS ceramic chip antenna is designed for use within the ISM 868MHz frequency bands, covering frequencies from 863MHz ∼ 870MHz.Perfect for ap...
Flexible Whip Antennas 433 & 900MHz Rugged construction Straight and right-angled SMA connector options Return loss...
LPRS Whip Antennas, 434 - 915 MHz A range of rugged Whip Antennas from Low Power Radio Solutions covering the 433,...
Antenna Cable Assembly Low Power Radio Solutions offering antenna cable assemblies to connect to SMA connectors for...
Lower-cost, intelligent, easy to program radio sub-system, a high performance System-on-Chip RF transceiver. Variants include Point-to-Point, Poi...
eRIC 434 & 868/915MHz Transceiver Breakout Boards Two breakout board modules which enable the testing and evaluatio...
Popular Categories For LPRS
Categories For LPRS
Popular Items
Popular items
ERA-ARDUINO-S900, LPRS
eRA-ARDUINO-S900 easyRadio Shield for Arduino
The LPRS
eRA-ARDUINO-S900
shield allows Arduino processor boards to communicate wirelessly operating in the ISM 868MHz (UK and Europe) or 915MHz (US) frequency band. The easyRadio technology provides bi-directional half-duplex communication over a distance of up to 200m.
eRA Shield for Arduino
eRA900TRS transceiver module
Arduino shield format board with headers for processor board
LED Power indicator
LED Tx Busy indicator
LED Tx/Rx Activity indicators
Jumper links to select alternative Tx/Rx connections to Arduino processor board
SMA antenna connector
USB-UART bridge cable header for easyRadio configuration
eRA900TRS Transceiver Module
RF Carrier Frequency: 868/915MHz ISM Band
Programmable Channel Bandwidth: 12.5kHz to 150kHz
Up to 132 channels
RF Output Power: +7dBm @ 868MHz, 0dBm @ 915MHz
Modulation: FSK (ASK available in Raw Data Mode)
Receiver Sensitivity: -107dBm @ 19.2Kbps, -112dBm @ 4.8Kbps, -117dBm @ 2.4Kbps
Host Data Rate: 2400bps to 115200bps
OTA Data Rate: 1200bps to 38400bps with Manchester encoding
Tx/Rx buffer: 180bytes
Digital RSSI (Received Signal Strength Indication)
Communication: serial UART with RTS/CTS flow control
Temporary channel/power level selection capability
On-board temperature sensor
Compatible with most 50Ω antennas
Power supply: +2.5V to +5.5Vdc
Operating temperature range: -40 to +85°C
Dimensions: 38 x 14 x 4mm
Applications: Remote sensing/control, local communication for the Internet of Things (IoT)
Note
The eRA900TRS module is also available separately under RS Part No.
783-9622
.
Supplied with
eRA900TRS module, antenna, 2 x 6-pin stackable headers, 2 x 8-pin stackable headers, 4-pin to pin header
Note
Requires Arduino board (not included).
Supplied with
ERA900TRS Transceiver and antenna,2 x 6 pin stackable headers,2 x 8 pin stackab...
Popular items
ANT-433BNC-Y, LPRS
LPRS Whip Antennas, 434 - 915 MHz
A range of rugged Whip Antennas from Low Power Radio Solutions covering the 433, 458, 868 and 915 MHz UHF radio bands with a variety of connector options. These omnidirectional quarter-wave antennas are suitable for portable and fixed applications and can be used with unbalanced feeders such as coaxial cable, or attached directly to a wireless transceiver. The range includes waterproof antennas suitable for outdoor applications.
External Antennas
Popular items
ANT-WP869M4-Y, LPRS
LPRS Whip Antennas, 434 - 915 MHz
A range of rugged Whip Antennas from Low Power Radio Solutions covering the 433, 458, 868 and 915 MHz UHF radio bands with a variety of connector options. These omnidirectional quarter-wave antennas are suitable for portable and fixed applications and can be used with unbalanced feeders such as coaxial cable, or attached directly to a wireless transceiver. The range includes waterproof antennas suitable for outdoor applications.
External Antennas
Popular items
LPRS-ANT-5G-SMA, LPRS
The LPRS 5G cellular antenna is also compatible with 2G/3G and 4G applications. Waterproof IP67 rated.
RoHS Compliant
Operating temp is -40°C ∼+85°C
Popular items
LPRS-CCA-2.4, LPRS
The LPRS ceramic chip antenna is designed for use within the ISM 2.4GHz frequency bands, covering frequencies from 2400MHz ∼ 2500MHz.Perfect for applications where the antenna must be mounted internally within an product enclosure, the LPRS-CCA-2.4 offers excellent RF performance and is fully compatible with surface mount production processes, enabling low assembly cost, improved quality and consistency.
Stable and reliable performance.
Low profile, compact size.
RoHS 3 compliant.
SMD process compatible.
Smart Home.
Popular items
LPRS-CCA-868, LPRS
The LPRS ceramic chip antenna is designed for use within the ISM 868MHz frequency bands, covering frequencies from 863MHz ∼ 870MHz.Perfect for applications where the antenna must be mounted internally within an product enclosure, the LPRS-CCA-868 offers excellent RF performance and is fully compatible with surface mount production processes, enabling low assembly cost, improved quality and consistency.
Stable and reliable performance.
Low profile, compact size.
RoHS compliant.
SMD process compatible.
Smart Home.
Popular items
ANT-900MS, LPRS
Flexible Whip Antennas 433 & 900MHz
Rugged construction
Straight and right-angled SMA connector options
Return loss ≤-17dB
Vertical Polarisation
VSWR ≤1.7
Dimensions 143x10mm (433MHz), 103x11mm (900MHz)
External Antennas
Popular items
ANT-WP433 SMA, LPRS
LPRS Whip Antennas, 434 - 915 MHz
A range of rugged Whip Antennas from Low Power Radio Solutions covering the 433, 458, 868 and 915 MHz UHF radio bands with a variety of connector options. These omnidirectional quarter-wave antennas are suitable for portable and fixed applications and can be used with unbalanced feeders such as coaxial cable, or attached directly to a wireless transceiver. The range includes waterproof antennas suitable for outdoor applications.
External Antennas
Popular items
RG174 150MM, LPRS
Antenna Cable Assembly
Low Power Radio Solutions offering antenna cable assemblies to connect to SMA connectors for your wireless applications.
RG174 Cable 150mm/300mm
External Antennas
Popular items
eRIC-SIGFOX, LPRS
Lower-cost, intelligent, easy to program radio sub-system, a high performance System-on-Chip RF transceiver. Variants include Point-to-Point, Point-to-Multi Point and LPWAN Sigfox / LoRa.
Family of interchangeable devices.
Programmable application memory (eRIC4 and eRIC9)
Secure data transmission: AES 128 bit data encryption option.
Selectable operating frequencies for world markets: 804-940 MHz for Europe, North & South America, India and China. 402-470 MHz for Europe, APAC and China.
Fully programmable low power options offering current consumption as low as 32uA.
Compact form factor, 20mm x 15mm x 2.5mm.
BPF (RF band pass filters).
Non-volatile flash storage.
Temperature sensor (eRIC4 and eRIC9).
Low drop voltage regulator.
Popular items
eRIC9-BOB, LPRS
eRIC 434 & 868/915MHz Transceiver Breakout Boards
Two breakout board modules which enable the testing and evaluation of the LPRS eRIC4 and eRIC9 RF Transceivers. The modules breaks out the 5 x 7 pins of the easy Radio Intelligent Controllers eRIC4 and eRIC9 to a more convenient 2 x 12 x 0.1pitch DIL pinout that matches commercial prototype breadboards.
Two versions of the breakout module are available:
eRIC4-BOB (RS
136-7688
) operates at 434 MHz and is intended for UK/European use.
eRIC9-BOB (RS
136-7689
) operates at 868 and 915 MHz and is suitable for European/US use.
A supplied jumper with the eRIC9-BOB optionally connects the Frequency Select Pin (14) to 0V setting the base operating frequency to 915MHz and restricting operation to meet FCC (USA) requirements.
Size: 67 x 20 x 5mm
Pinout: 2 rows of 12 x 0.1 pitch, spaced at 0.5"
Antenna connection: SMA Jack connector or on-board eRIC UFL RF connector
Wireless Modules - Low Power Radio Solutions
Popular items
New Items
New items
ERA-ARDUINO-S900, LPRS
eRA-ARDUINO-S900 easyRadio Shield for Arduino
The LPRS
eRA-ARDUINO-S900
shield allows Arduino processor boards to communicate wirelessly operating in the ISM 868MHz (UK and Europe) or 915MHz (US) frequency band. The easyRadio technology provides bi-directional half-duplex communication over a distance of up to 200m.
eRA Shield for Arduino
eRA900TRS transceiver module
Arduino shield format board with headers for processor board
LED Power indicator
LED Tx Busy indicator
LED Tx/Rx Activity indicators
Jumper links to select alternative Tx/Rx connections to Arduino processor board
SMA antenna connector
USB-UART bridge cable header for easyRadio configuration
eRA900TRS Transceiver Module
RF Carrier Frequency: 868/915MHz ISM Band
Programmable Channel Bandwidth: 12.5kHz to 150kHz
Up to 132 channels
RF Output Power: +7dBm @ 868MHz, 0dBm @ 915MHz
Modulation: FSK (ASK available in Raw Data Mode)
Receiver Sensitivity: -107dBm @ 19.2Kbps, -112dBm @ 4.8Kbps, -117dBm @ 2.4Kbps
Host Data Rate: 2400bps to 115200bps
OTA Data Rate: 1200bps to 38400bps with Manchester encoding
Tx/Rx buffer: 180bytes
Digital RSSI (Received Signal Strength Indication)
Communication: serial UART with RTS/CTS flow control
Temporary channel/power level selection capability
On-board temperature sensor
Compatible with most 50Ω antennas
Power supply: +2.5V to +5.5Vdc
Operating temperature range: -40 to +85°C
Dimensions: 38 x 14 x 4mm
Applications: Remote sensing/control, local communication for the Internet of Things (IoT)
Note
The eRA900TRS module is also available separately under RS Part No.
783-9622
.
Supplied with
eRA900TRS module, antenna, 2 x 6-pin stackable headers, 2 x 8-pin stackable headers, 4-pin to pin header
Note
Requires Arduino board (not included).
Supplied with
ERA900TRS Transceiver and antenna,2 x 6 pin stackable headers,2 x 8 pin stackab...
New items
ANT-433BNC-Y, LPRS
LPRS Whip Antennas, 434 - 915 MHz
A range of rugged Whip Antennas from Low Power Radio Solutions covering the 433, 458, 868 and 915 MHz UHF radio bands with a variety of connector options. These omnidirectional quarter-wave antennas are suitable for portable and fixed applications and can be used with unbalanced feeders such as coaxial cable, or attached directly to a wireless transceiver. The range includes waterproof antennas suitable for outdoor applications.
External Antennas
New items
ANT-WP869M4-Y, LPRS
LPRS Whip Antennas, 434 - 915 MHz
A range of rugged Whip Antennas from Low Power Radio Solutions covering the 433, 458, 868 and 915 MHz UHF radio bands with a variety of connector options. These omnidirectional quarter-wave antennas are suitable for portable and fixed applications and can be used with unbalanced feeders such as coaxial cable, or attached directly to a wireless transceiver. The range includes waterproof antennas suitable for outdoor applications.
External Antennas
New items
LPRS-ANT-5G-SMA, LPRS
The LPRS 5G cellular antenna is also compatible with 2G/3G and 4G applications. Waterproof IP67 rated.
RoHS Compliant
Operating temp is -40°C ∼+85°C
New items
LPRS-CCA-2.4, LPRS
The LPRS ceramic chip antenna is designed for use within the ISM 2.4GHz frequency bands, covering frequencies from 2400MHz ∼ 2500MHz.Perfect for applications where the antenna must be mounted internally within an product enclosure, the LPRS-CCA-2.4 offers excellent RF performance and is fully compatible with surface mount production processes, enabling low assembly cost, improved quality and consistency.
Stable and reliable performance.
Low profile, compact size.
RoHS 3 compliant.
SMD process compatible.
Smart Home.
New items
LPRS-CCA-868, LPRS
The LPRS ceramic chip antenna is designed for use within the ISM 868MHz frequency bands, covering frequencies from 863MHz ∼ 870MHz.Perfect for applications where the antenna must be mounted internally within an product enclosure, the LPRS-CCA-868 offers excellent RF performance and is fully compatible with surface mount production processes, enabling low assembly cost, improved quality and consistency.
Stable and reliable performance.
Low profile, compact size.
RoHS compliant.
SMD process compatible.
Smart Home.
New items
ANT-900MS, LPRS
Flexible Whip Antennas 433 & 900MHz
Rugged construction
Straight and right-angled SMA connector options
Return loss ≤-17dB
Vertical Polarisation
VSWR ≤1.7
Dimensions 143x10mm (433MHz), 103x11mm (900MHz)
External Antennas
New items
ANT-WP433 SMA, LPRS
LPRS Whip Antennas, 434 - 915 MHz
A range of rugged Whip Antennas from Low Power Radio Solutions covering the 433, 458, 868 and 915 MHz UHF radio bands with a variety of connector options. These omnidirectional quarter-wave antennas are suitable for portable and fixed applications and can be used with unbalanced feeders such as coaxial cable, or attached directly to a wireless transceiver. The range includes waterproof antennas suitable for outdoor applications.
External Antennas
New items
RG174 150MM, LPRS
Antenna Cable Assembly
Low Power Radio Solutions offering antenna cable assemblies to connect to SMA connectors for your wireless applications.
RG174 Cable 150mm/300mm
External Antennas
New items
eRIC-SIGFOX, LPRS
Lower-cost, intelligent, easy to program radio sub-system, a high performance System-on-Chip RF transceiver. Variants include Point-to-Point, Point-to-Multi Point and LPWAN Sigfox / LoRa.
Family of interchangeable devices.
Programmable application memory (eRIC4 and eRIC9)
Secure data transmission: AES 128 bit data encryption option.
Selectable operating frequencies for world markets: 804-940 MHz for Europe, North & South America, India and China. 402-470 MHz for Europe, APAC and China.
Fully programmable low power options offering current consumption as low as 32uA.
Compact form factor, 20mm x 15mm x 2.5mm.
BPF (RF band pass filters).
Non-volatile flash storage.
Temperature sensor (eRIC4 and eRIC9).
Low drop voltage regulator.
New items
eRIC9-BOB, LPRS
eRIC 434 & 868/915MHz Transceiver Breakout Boards
Two breakout board modules which enable the testing and evaluation of the LPRS eRIC4 and eRIC9 RF Transceivers. The modules breaks out the 5 x 7 pins of the easy Radio Intelligent Controllers eRIC4 and eRIC9 to a more convenient 2 x 12 x 0.1pitch DIL pinout that matches commercial prototype breadboards.
Two versions of the breakout module are available:
eRIC4-BOB (RS
136-7688
) operates at 434 MHz and is intended for UK/European use.
eRIC9-BOB (RS
136-7689
) operates at 868 and 915 MHz and is suitable for European/US use.
A supplied jumper with the eRIC9-BOB optionally connects the Frequency Select Pin (14) to 0V setting the base operating frequency to 915MHz and restricting operation to meet FCC (USA) requirements.
Size: 67 x 20 x 5mm
Pinout: 2 rows of 12 x 0.1 pitch, spaced at 0.5"
Antenna connection: SMA Jack connector or on-board eRIC UFL RF connector
Wireless Modules - Low Power Radio Solutions
Don’t hesitate to ask questions for better clarification.