Enrgtech

Deliver to

United Kingdom

Categories

Brands

Part Numbers

Top Products

0

0.0 / 5

Reviews 0 Not Rated Yet
ITT Cannon Profile

Website
Manufacturer Type
Company Size
Location
Founded
Specialties
Reviews
5 star
(0%)
4 star
(0%)
3 star
(0%)
2 star
(0%)
1 star
(0%)

Be the first to review this manufacturer.
Don’t hesitate to ask questions for better clarification.

Featured Products


Popular Categories For ITT Cannon


Categories For ITT Cannon




New Items
New items
DEW-9S2, ITT Cannon

DEW-9S2, ITT Cannon

ITT D*W Connectors (IDC Termination) Discrete wire termination providing reliable, rapid assembly Tinned and dimpled shell for grounding continuity Accepts wires from 22 to 26awg Termination tool available separately Standards IDC ITT D Type Connectors Suitable for military, industrial or commercial applications and computer interfacing etc. ITT D* U (crimp contacts) Body Steel Surface, body (standard) Yellow Chromate over Zinc Insulator Thermo Plastic Insulation UL94V0 Contacts Copper Alloy Contact Plating: Gold Switch Current 5A Working Voltage 400V= or ∼ peak-peak Contact Resistance (max) 8mΩ Insulation Resistance (min) 5000mΩ Temperature Range -55°C to 125°C Environmental Classification - No. of joints (min) 500
New items
120-8551-000, ITT Cannon

120-8551-000, ITT Cannon

Sureseal Cable Receptacle Note Contacts must be ordered separately see stock numbers: 167-9499 male or 167-9506 female. For the necessary tooling see stock number 167-9534 typical. Plug & receptacle material Perbunan or Nitrile-Butadiene rubber Contact material Tin-lead plated copper alloy Current rating 16A per contact Contact resistance 10mΩ max. Insulation resistance 100MΩ min. Dielectric withstanding voltage 1200Vac at sea level Operating temperature -40°C to +105°C Sealing IP67 acc. to DIN 40050 Durability 50 cycles mating & unmating Salt spray MIL-STD-202D Method 101 D Humidity 95% at 95°C for 1000 hours Industrial gas Equivalent to MIL-C-23216 Technical specification Plug and receptacle material Perbunan or Nitrile-Butadiene rubber Contact material Copper alloy, tin lead plate Current 8A Contact resistance 10mΩ max. Insulation resistance 100MΩ min. Operating temperature -40°C to +105°C Environmental sealing IP67 (DIN 40050) Durability 50 cycles Salt spray MIL-STD-202D, method 101D Humidity 95% at 95°C/1000 hours Industrial gas MIL-C-23216
New items
ZDC-37P-1AKN-146, ITT Cannon

ZDC-37P-1AKN-146, ITT Cannon

ITT ZD 90° PCB Mount Stamped and formed contacts ''Closed entry'' technology, guaranteeing secure and reliable connections. The performance of these connectors makes them particularly suitable for industrial applications, information technology, telecommunications, medical apparatus etc Shell Tinned steel Insulator flammability rating UL94V0 Contacts Male in brass, female in phosphor bronze gold-plated nickel on active part Current rating 5A Dielectric with stand voltage 1000V a.c Contact resistance (max) 15mΩ Temp. range -55°C to +105°C Expected mating cycles (min) 100 ITT D Type Connectors Suitable for military, industrial or commercial applications and computer interfacing etc. ITT D* U (crimp contacts) Body Steel Surface, body (standard) Yellow Chromate over Zinc Insulator Thermo Plastic Insulation UL94V0 Contacts Copper Alloy Contact Plating: Gold Switch Current 5A Working Voltage 400V= or ∼ peak-peak Contact Resistance (max) 8mΩ Insulation Resistance (min) 5000mΩ Temperature Range -55°C to 125°C Environmental Classification - No. of joints (min) 500
New items
192990-1370, ITT Cannon

192990-1370, ITT Cannon

Panel Shells A panel-mounted receptacle for use with ITT Cannon Trident Connector Series of ring-lock circular connectors. Featuring a rugged metal bayonet connecting system, the Trident Connector Series features a variety of pin configurations for both sockets and receptacles. When fully mated the connection system is protected up to IP65, meaning excellent protection against dust and water splash exposure. Dimensions (mm) For Panel Shell No. of Ways Fixing Centres Cut-out Dia Front Cut-out Dia Rear Flange Size Mounting Hole Dia 4 18.2 15.1 17.3 23.8 3.2 7 27.0 27.8 31.3 33.3 3.1 8 20.5 18.2 21.8 26.2 3.2 12 22.9 21.4 25.0 28.5 3.2 19 24.5 24.6 28.1 30.8 3.2 23 26.9 27.8 31.3 33.1 3.2 28 29.2 30.9 34.5 36.3 3.2 35 31.6 34.1 37.7 39.3 3.2 48 34.7 37.3 40.9 42.6 3.9 QM Range Plastic Circular These shells are also supplied with a screw-on hood having an integral cable clamp (three grip sizes are supplied for different cable diameters). The two shells are polarised and locked together by a bayonet action metal ring.,Panel-mounting shells with pin inserts will only mate with cable-mounting shells with socket inserts and the Panel-mounting shells with socket inserts will only mate with cable-mounting shells with pin inserts.,7-way versions meet VDE 0110. Shell Material Black UL94V-0 rated nylon Operating Temperature -25 → +105°C Test Potential 1000 Vac r.m.s. Insulation Resistance 5000 MΩ at 500Vdc
New items
192993-0081, ITT Cannon

192993-0081, ITT Cannon

Shielded Backshell Provides cable shielding termination Internal braid is grounded to outer shell Available in a standard or large cable exit ITT TNM Shielded The TNM connector range builds on the popular Trident and Neptune ranges from ITT Cannon. They feature full metal construction giving high reliability and durability whilst conforming to MIL-C-26482 body sizes and flange mounting. RF shielding inherent in the full metal construction Backshells enable cable braid termination so meeting EMC requirements Signal versions have the same planform & contact arrangements as the QM range so upgrading and interchangeability can be achieved Includes a rear rubber seal that enables IP67 rating to be maintained if only some contacts are used. The rubber seal can be discarded if a backshell is to be used. Both are rated to IP67 Cable, chassis and jam nut configurations available in standard and reversed formats One, two or three part crimp contacts, also solder cup and PCB terminating contacts available for signal transfer. Power contacts are only required for power/signal connector types Current Rating, (single contact in isolation) 1 Part Contact 5A 2 Part Contact 13A 3 Part Contact 13A Solder Cup Contacts 13A PCB Terminating Contacts 5A Voltage Rating 250Vac Shielding 40dB (10kHz - 100MHz) Contact Resistance 5mΩ Temperature Range -55 → 105°C
New items
121587-0013, ITT Cannon

121587-0013, ITT Cannon

The ITT Cannon TSTRECT series is the free plug with 6 numbers of contact. The colour of this free plug is the grey and material used for it is the polyamide. The contact current rating of this free plug is the 13 A. Operating temperature is the -55°C to +105°C Up to 500 mating cycles
New items
121587-0026, ITT Cannon

121587-0026, ITT Cannon

The ITT Cannon TSTRECT series is the plug strain relief hood with 36 numbers of contact. The contact current rating of this plug is the 13 A. The colour of this plug strain relief hood is the grey and the material used for it is polyamide. Provides strain relief and wire protection Secure with a tie-wrap
New items
121587-0033, ITT Cannon

121587-0033, ITT Cannon

The ITT Cannon TSRRECT series is the panel mounted receptacle having 6 numbers of contact. The colour of this receptacle is the grey and material used for it is the polyamide. The contact current rating of this receptacle is the 13 A. Operating temperature is the -55°C to +105°C Up to 500 mating cycles
New items
192900-0450, ITT Cannon

192900-0450, ITT Cannon

The ITT Cannon T2T series is the standard socket having contact size is the 16 to 18 AWG. The current rating of the contact is the 13 A and gender is the female. Gold plating Contact material is the brass
New items
192990-1520, ITT Cannon

192990-1520, ITT Cannon

The ITT Cannon TRA series is the unsealed cable clamps for use with ringlock circular connectors. The shell size of this unsealed cable clamp is the 24 and the material used is the nylon. Provides strain relief and wire protection
New items
TST06AH00, ITT Cannon

TST06AH00, ITT Cannon

Hood (for cable shell type A) One snaps on each side of the shell, improving appearance and giving some cable support. Ends may be secured by cable tie, lacing cord, etc QM Range Plastic Rectangular Connector shells in nylon, with type A and type B locking together and are shaped to ensure correct orientation before engagement. Type A is cable mounting. Type B, whilst basically snap-in chassis mounting, may also be cable mounted if an in-line connection is required. Both will accept pin or socket inserts, which fit easily into the shells without the use of special tools. The inserts may be soldered or crimped and are available in three wire entry sizes.,Use hole cutter stock no. 543-709 for 24 way. Contacts must be ordered separately - see Range 'Contacts and Tooling.' (for example Crimp Single Piece Contact 466-804 Solder Cup Contact 329-8660 Crimp Tool 531-403)
New items
ZDB-25S-1AKN-146, ITT Cannon

ZDB-25S-1AKN-146, ITT Cannon

ITT ZD 90° PCB Mount Stamped and formed contacts ''Closed entry'' technology, guaranteeing secure and reliable connections. The performance of these connectors makes them particularly suitable for industrial applications, information technology, telecommunications, medical apparatus etc Shell Tinned steel Insulator flammability rating UL94V0 Contacts Male in brass, female in phosphor bronze gold-plated nickel on active part Current rating 5A Dielectric with stand voltage 1000V a.c Contact resistance (max) 15mΩ Temp. range -55°C to +105°C Expected mating cycles (min) 100 ITT D Type Connectors Suitable for military, industrial or commercial applications and computer interfacing etc. ITT D* U (crimp contacts) Body Steel Surface, body (standard) Yellow Chromate over Zinc Insulator Thermo Plastic Insulation UL94V0 Contacts Copper Alloy Contact Plating: Gold Switch Current 5A Working Voltage 400V= or ∼ peak-peak Contact Resistance (max) 8mΩ Insulation Resistance (min) 5000mΩ Temperature Range -55°C to 125°C Environmental Classification - No. of joints (min) 500