Intelligent Embedded Solutions Profile
Featured Products
Servomotor Controller Plug-in Module (Shield) for Arduino This 18-channel R/C servomotor driver shield is designed...
IES Interface Kits for Ampire TFT LCD Displays The IES range of TFT Interface Kits ( TIK ) is an advanced T...
PIFI Stereo Audio Expansion Board The PIFI is an expansion board that adds a CD quality stereo audio to the Raspberry Pi. The PIFI has the same...
IES Interface Kits for Ampire TFT LCD Displays The IES range of TFT Interface Kits ( TIK ) is an advanced T...
GPS Plug-in Module (Shield) for Arduino The IES-SHIELD-GPS and IES-SHIELD-GPAM modules are highly integrated multi-channel simultaneous GPS and...
IES Interface Kits for Ampire TFT LCD Displays The IES range of TFT Interface Kits ( TIK ) is an advanced T...
Stepper-Motor Controller Plug-in Module (Shield) for Arduino This 4-channel stepper-motor driver shield is designed for the Arduino UNO microcon...
4-Channel LED Lighting Shield for Arduino This lighting shield is capable of driving four high-current chan...
IES Interface Kits for Ampire TFT LCD Displays The IES range of TFT Interface Kits ( TIK ) is an advanced TFT LCD monitor control board, offerin...
IES Interface Kits for Ampire TFT LCD Displays The IES range of TFT Interface Kits ( TIK ) is an advanced T...
GPS Plug-in Module (Shield) for Arduino The IES-SHIELD-GPS and IES-SHIELD-GPAM modules are highly integrate...
IES Interface Kits for Ampire TFT LCD Displays The IES range of TFT Interface Kits ( TIK ) is an advanced T...
Popular Categories For Intelligent Embedded Solutions
Popular Items
Popular items
IES-SHIELD-SCX18, Intelligent Embedded Solutions
Servomotor Controller Plug-in Module (Shield) for Arduino
This 18-channel R/C servomotor driver shield is designed for the Arduino UNO microcontroller board but is compatible with all other Arduino boards and the Raspberry Pi via the high speed I²C interface. Typical applications include humanoid and multi-limbed 'walking' format robots.
Standard Arduino UNO Shield form factor
256 steps of angular shaft position
16-level speed control for each servo
Movement complete and soft-start complete status for each servomotor
Global activation control ensures all servos react together
Standard R/C servomotor connection headers
Communication via 400kHz serial I²C bus
Jumper-selectable I²C address
Jumper-selectable I²C pull-ups (Not required for Raspberry Pi)
Two +5V @ 3A regulators with heatsinks for motor power supply
Up to four shields can be linked together via the I²C bus controlling up to 72 servomotors
Screw connector for motor power supply
Operating temperature range: 0 to +70°C
Dimensions: 56.25 x 53.5 x 15mm
Compatible Servomotors
781-3058
Standard 180° Servomotor
781-3046
Standard Continuous-Rotation Servomotor, 50rpm
790-5220
Standard Continuous-Rotation Servomotor, 180rpm
Intelligent Embedded Solutions
Popular items
IES-TIK-AM-800480ANTMQW-A0H, Intelligent Embedded Solutions
IES Interface Kits for Ampire TFT LCD Displays
The IES range of TFT Interface Kits ( TIK ) is an advanced TFT LCD monitor control board, offering high quality images
on a range of TFT products.
This single board solution enables an easy monitor and or video replacement with a large area TFT display.
The TIK has a wide input and automatic scaling range, up to WUXGA ( 1080x1920 pixels ) at 60Hz, and in all video
modes the full TFT screen is used.
Suitable applications include monitor replacement and adding additional monitors.
Features of the IES TFT interface kits:
Analogue RGB D-SUB and DVI ( Digital Video Interface ) Inputs
Audio in and out (2x3W 4ohm)
Single 12v DC input voltage
Built-in multi language On Screen Display ( OSD ) user interface
Multi-sync capability up to WUXGA resolution at 60Hz
Compatible standard VGA, SVGA, XGA, SXGA and UXGA VESA timing
IDS Display Accessories
Popular items
IES-PI-hIfI, Intelligent Embedded Solutions
PIFI Stereo Audio Expansion Board
The PIFI is an expansion board that adds a CD quality stereo audio to the Raspberry Pi. The PIFI has the same form factor as the Pi so you can easily mount it above the Pi using a micro USB cable and stand-off pillars without blocking the GPIO header.
What can I use the PIFI for?
The PIFI is ideal for projects and designs where audio playback and recording is needed.
Features & Benefits of the PIFI
3 audio outputs
-headphone
-Sony/Phillips Digital Interface Format (SPDIF)
-6+6 Watt speaker amplifier
On-board microphone
External microphone connector
2 USB ports
Advanced Linux Sound Architecture (ALSA) driver compatible
44/48 bit stereo record and playback
Popular items
IES-TIK-AM-1024600KTMQW-01H, Intelligent Embedded Solutions
IES Interface Kits for Ampire TFT LCD Displays
The IES range of TFT Interface Kits ( TIK ) is an advanced TFT LCD monitor control board, offering high quality images
on a range of TFT products.
This single board solution enables an easy monitor and or video replacement with a large area TFT display.
The TIK has a wide input and automatic scaling range, up to WUXGA ( 1080x1920 pixels ) at 60Hz, and in all video
modes the full TFT screen is used.
Suitable applications include monitor replacement and adding additional monitors.
Features of the IES TFT interface kits:
Analogue RGB D-SUB and DVI ( Digital Video Interface ) Inputs
Audio in and out (2x3W 4ohm)
Single 12v DC input voltage
Built-in multi language On Screen Display ( OSD ) user interface
Multi-sync capability up to WUXGA resolution at 60Hz
Compatible standard VGA, SVGA, XGA, SXGA and UXGA VESA timing
IDS Display Accessories
Popular items
IES-SHIELD-GPS., Intelligent Embedded Solutions
GPS Plug-in Module (Shield) for Arduino
The IES-SHIELD-GPS and IES-SHIELD-GPAM modules are highly integrated multi-channel simultaneous GPS and GLONASS positioning systems. Both modules include programmable analogue input/digital GPIO. IES-SHIELD-GPAM additionally features an on-board 3-axis accelerometer. Although both modules have an Arduino-shield format, they can also be used with a Raspberry PI SBC. Both modules feature I2C communication with the host in order to leave the serial UART [Tx/Rx] port free for other functions e.g. wireless communication.
GPS data is stored within internal registers which are updated once per second and includes:
Latitude (i.e. vertical)
Longitude (i.e. horizontal)
Altitude (metres)
Time & date (UTC)
Heading (True)
Speed (kilometres per hour)
Satellites in view
The accelerometer of the IES-SHIELD-GPAM can be used to determine inclination for mobile robot applications.
Give your Arduino or Raspberry Pi robot the ability to know where it is, how fast its moving and in what direction.
Arduino Shield standard form factor for simple integration into any Arduino project
Fast position acquisition with battery back-up for fast Integral low power antenna
400kHz I2C communication interface
Jumper-selectable I2C address
Jumper-selectable I2C pull-ups (Not required for Raspberry Pi)
4 x I/O pins programmable as GPIO or analogue inputs for local sensors
GPS Status LED
3-axis acceleration, pitch and roll measurement (IES-SHIELD-GPAM RS
862-5708
only)
Replaceable CR1220 lithium back-up battery
Power supply: +7V to +16Vdc from Arduino Vin pin
Operating temperature range: 0 to +70°C
Dimensions: 56.25 x 53.5 x 20mm
Applications: Mobile robot navigation, vehicle security systems
Popular items
IES-TIK-AM-1024768Q2TMQW-00H, Intelligent Embedded Solutions
IES Interface Kits for Ampire TFT LCD Displays
The IES range of TFT Interface Kits ( TIK ) is an advanced TFT LCD monitor control board, offering high quality images
on a range of TFT products.
This single board solution enables an easy monitor and or video replacement with a large area TFT display.
The TIK has a wide input and automatic scaling range, up to WUXGA ( 1080x1920 pixels ) at 60Hz, and in all video
modes the full TFT screen is used.
Suitable applications include monitor replacement and adding additional monitors.
Features of the IES TFT interface kits:
Analogue RGB D-SUB and DVI ( Digital Video Interface ) Inputs
Audio in and out (2x3W 4ohm)
Single 12v DC input voltage
Built-in multi language On Screen Display ( OSD ) user interface
Multi-sync capability up to WUXGA resolution at 60Hz
Compatible standard VGA, SVGA, XGA, SXGA and UXGA VESA timing
IDS Display Accessories
Popular items
IES-SHIELD-STX4, Intelligent Embedded Solutions
Stepper-Motor Controller Plug-in Module (Shield) for Arduino
This 4-channel stepper-motor driver shield is designed for the Arduino UNO microcontroller board but is compatible with all other Arduino boards and the Raspberry Pi via the high speed I2C interface. Typical applications include humanoid and small, wheeled rover format robots.
Standard Arduino UNO Shield form factor
Each motor can be stepped in either direction a set number of steps at a set speed
Each motor can be continuously stepped at a set speed
Each motor can be stopped with holding torque or completely off
Selectable 1 or 2 phase excitation
8-bit set speed resolution
Up to 65535 set number of steps
4 shields can be linked together via I2C to control up to 16 motors
Supports all 5 to 12V unipolar (5/6-wire) stepper motors with a minimum winding resistance of 20Ω (250mA)
Communication via 400kHz serial I2C bus
Jumper-selectable I2C address
Jumper-selectable I2C pull-ups (Not required for Raspberry Pi)
Jumper-selectable motor power supply: +6V to +12V or +5V regulated
+5V,3A regulator with heatsink for motor and USB-A power supply
Up to four shields can be linked together via the I2C bus controlling up to 16 stepper-motors
Screw connector for power supply input
Power supply input: +6V to +12Vdc
USB socket provides power to an external circuit, e.g. a Raspberry PI SBC
Operating temperature range: 0 to +70°C
Dimensions: 56.25 x 53.5 x 15mm
Note
A suitable general purpose stepper motor is available under RS Part No.
368-0277
Popular items
IES-SHIELD-RGBW, Intelligent Embedded Solutions
4-Channel LED Lighting Shield for Arduino
This lighting shield is capable of driving four high-current channels each containing up to 12 LEDs in series. It is designed for the Arduino UNO but is compatible with all other Ardunio boards and the Raspberry Pi via the I2C interface. Suitable for a wide range of applications including room lighting, accent lighting and aquarium lighting. A built in aquarium mode simulates moonlight, daytime and night cycles using an internal 24 hour timer.
Arduino UNO shield standard form factor
Four LED channels each with 350mA constant-current drivers
Up to 12 LEDs in series per channel
Communication via 400kHz serial I2C bus
Jumper-selectable I2C address
Jumper-selectable I2C pull-ups (Not required for Raspberry Pi)
Up to four shields can be linked together via the I²C bus
Screw connector for LED power supply
Operating temperature range: 0 to +70°C
Dimensions: 56.25 x 53.5 x 12mm
Note
The supplied LED module will require a 12V @ 500mA power supply. As the shield uses a constant-current drive, the LED power supply voltage is given by the formula V = n x 4 where n is the number of series LEDs in a channel.
Supplied with
RGBW 4W 340lumen lighting module with heatsink, featuring OSRAM OSLON LEDs
Popular items
IES-TIK-AM-800600P6TMQW-A0H, Intelligent Embedded Solutions
IES Interface Kits for Ampire TFT LCD Displays
The IES range of TFT Interface Kits ( TIK ) is an advanced TFT LCD monitor control board, offering high quality images
on a range of TFT products.
This single board solution enables an easy monitor and or video replacement with a large area TFT display.
The TIK has a wide input and automatic scaling range, up to WUXGA ( 1080x1920 pixels ) at 60Hz, and in all video
modes the full TFT screen is used.
Suitable applications include monitor replacement and adding additional monitors.
Features of the IES TFT interface kits:
Analogue RGB D-SUB and DVI ( Digital Video Interface ) Inputs
Audio in and out (2x3W 4ohm)
Single 12v DC input voltage
Built-in multi language On Screen Display ( OSD ) user interface
Multi-sync capability up to WUXGA resolution at 60Hz
Compatible standard VGA, SVGA, XGA, SXGA and UXGA VESA timing
IDS Display Accessories
Popular items
IES-TIK-AM-1024768R2TNQW-00H, Intelligent Embedded Solutions
IES Interface Kits for Ampire TFT LCD Displays
The IES range of TFT Interface Kits ( TIK ) is an advanced TFT LCD monitor control board, offering high quality images
on a range of TFT products.
This single board solution enables an easy monitor and or video replacement with a large area TFT display.
The TIK has a wide input and automatic scaling range, up to WUXGA ( 1080x1920 pixels ) at 60Hz, and in all video
modes the full TFT screen is used.
Suitable applications include monitor replacement and adding additional monitors.
Features of the IES TFT interface kits:
Analogue RGB D-SUB and DVI ( Digital Video Interface ) Inputs
Audio in and out (2x3W 4ohm)
Single 12v DC input voltage
Built-in multi language On Screen Display ( OSD ) user interface
Multi-sync capability up to WUXGA resolution at 60Hz
Compatible standard VGA, SVGA, XGA, SXGA and UXGA VESA timing
IDS Display Accessories
Popular items
IES-SHIELD-GPAM., Intelligent Embedded Solutions
GPS Plug-in Module (Shield) for Arduino
The IES-SHIELD-GPS and IES-SHIELD-GPAM modules are highly integrated multi-channel simultaneous GPS and GLONASS positioning systems. Both modules include programmable analogue input/digital GPIO. IES-SHIELD-GPAM additionally features an on-board 3-axis accelerometer. Although both modules have an Arduino-shield format, they can also be used with a Raspberry PI SBC. Both modules feature I2C communication with the host in order to leave the serial UART [Tx/Rx] port free for other functions e.g. wireless communication.
GPS data is stored within internal registers which are updated once per second and includes:
Latitude (i.e. vertical)
Longitude (i.e. horizontal)
Altitude (metres)
Time & date (UTC)
Heading (True)
Speed (kilometres per hour)
Satellites in view
The accelerometer of the IES-SHIELD-GPAM can be used to determine inclination for mobile robot applications.
Give your Arduino or Raspberry Pi robot the ability to know where it is, how fast its moving and in what direction.
Arduino Shield standard form factor for simple integration into any Arduino project
Fast position acquisition with battery back-up for fast Integral low power antenna
400kHz I2C communication interface
Jumper-selectable I2C address
Jumper-selectable I2C pull-ups (Not required for Raspberry Pi)
4 x I/O pins programmable as GPIO or analogue inputs for local sensors
GPS Status LED
3-axis acceleration, pitch and roll measurement (IES-SHIELD-GPAM RS
862-5708
only)
Replaceable CR1220 lithium back-up battery
Power supply: +7V to +16Vdc from Arduino Vin pin
Operating temperature range: 0 to +70°C
Dimensions: 56.25 x 53.5 x 20mm
Applications: Mobile robot navigation, vehicle security systems
Popular items
IES-TIK-AM-1024600L2TMQW-01H, Intelligent Embedded Solutions
IES Interface Kits for Ampire TFT LCD Displays
The IES range of TFT Interface Kits ( TIK ) is an advanced TFT LCD monitor control board, offering high quality images
on a range of TFT products.
This single board solution enables an easy monitor and or video replacement with a large area TFT display.
The TIK has a wide input and automatic scaling range, up to WUXGA ( 1080x1920 pixels ) at 60Hz, and in all video
modes the full TFT screen is used.
Suitable applications include monitor replacement and adding additional monitors.
Features of the IES TFT interface kits:
Analogue RGB D-SUB and DVI ( Digital Video Interface ) Inputs
Audio in and out (2x3W 4ohm)
Single 12v DC input voltage
Built-in multi language On Screen Display ( OSD ) user interface
Multi-sync capability up to WUXGA resolution at 60Hz
Compatible standard VGA, SVGA, XGA, SXGA and UXGA VESA timing
IDS Display Accessories
New Items
New items
IES-SHIELD-SCX18, Intelligent Embedded Solutions
Servomotor Controller Plug-in Module (Shield) for Arduino
This 18-channel R/C servomotor driver shield is designed for the Arduino UNO microcontroller board but is compatible with all other Arduino boards and the Raspberry Pi via the high speed I²C interface. Typical applications include humanoid and multi-limbed 'walking' format robots.
Standard Arduino UNO Shield form factor
256 steps of angular shaft position
16-level speed control for each servo
Movement complete and soft-start complete status for each servomotor
Global activation control ensures all servos react together
Standard R/C servomotor connection headers
Communication via 400kHz serial I²C bus
Jumper-selectable I²C address
Jumper-selectable I²C pull-ups (Not required for Raspberry Pi)
Two +5V @ 3A regulators with heatsinks for motor power supply
Up to four shields can be linked together via the I²C bus controlling up to 72 servomotors
Screw connector for motor power supply
Operating temperature range: 0 to +70°C
Dimensions: 56.25 x 53.5 x 15mm
Compatible Servomotors
781-3058
Standard 180° Servomotor
781-3046
Standard Continuous-Rotation Servomotor, 50rpm
790-5220
Standard Continuous-Rotation Servomotor, 180rpm
Intelligent Embedded Solutions
New items
IES-TIK-AM-800480ANTMQW-A0H, Intelligent Embedded Solutions
IES Interface Kits for Ampire TFT LCD Displays
The IES range of TFT Interface Kits ( TIK ) is an advanced TFT LCD monitor control board, offering high quality images
on a range of TFT products.
This single board solution enables an easy monitor and or video replacement with a large area TFT display.
The TIK has a wide input and automatic scaling range, up to WUXGA ( 1080x1920 pixels ) at 60Hz, and in all video
modes the full TFT screen is used.
Suitable applications include monitor replacement and adding additional monitors.
Features of the IES TFT interface kits:
Analogue RGB D-SUB and DVI ( Digital Video Interface ) Inputs
Audio in and out (2x3W 4ohm)
Single 12v DC input voltage
Built-in multi language On Screen Display ( OSD ) user interface
Multi-sync capability up to WUXGA resolution at 60Hz
Compatible standard VGA, SVGA, XGA, SXGA and UXGA VESA timing
IDS Display Accessories
New items
IES-PI-hIfI, Intelligent Embedded Solutions
PIFI Stereo Audio Expansion Board
The PIFI is an expansion board that adds a CD quality stereo audio to the Raspberry Pi. The PIFI has the same form factor as the Pi so you can easily mount it above the Pi using a micro USB cable and stand-off pillars without blocking the GPIO header.
What can I use the PIFI for?
The PIFI is ideal for projects and designs where audio playback and recording is needed.
Features & Benefits of the PIFI
3 audio outputs
-headphone
-Sony/Phillips Digital Interface Format (SPDIF)
-6+6 Watt speaker amplifier
On-board microphone
External microphone connector
2 USB ports
Advanced Linux Sound Architecture (ALSA) driver compatible
44/48 bit stereo record and playback
New items
IES-TIK-AM-1024600KTMQW-01H, Intelligent Embedded Solutions
IES Interface Kits for Ampire TFT LCD Displays
The IES range of TFT Interface Kits ( TIK ) is an advanced TFT LCD monitor control board, offering high quality images
on a range of TFT products.
This single board solution enables an easy monitor and or video replacement with a large area TFT display.
The TIK has a wide input and automatic scaling range, up to WUXGA ( 1080x1920 pixels ) at 60Hz, and in all video
modes the full TFT screen is used.
Suitable applications include monitor replacement and adding additional monitors.
Features of the IES TFT interface kits:
Analogue RGB D-SUB and DVI ( Digital Video Interface ) Inputs
Audio in and out (2x3W 4ohm)
Single 12v DC input voltage
Built-in multi language On Screen Display ( OSD ) user interface
Multi-sync capability up to WUXGA resolution at 60Hz
Compatible standard VGA, SVGA, XGA, SXGA and UXGA VESA timing
IDS Display Accessories
New items
IES-TIK-AM-1024768Q2TMQW-00H, Intelligent Embedded Solutions
IES Interface Kits for Ampire TFT LCD Displays
The IES range of TFT Interface Kits ( TIK ) is an advanced TFT LCD monitor control board, offering high quality images
on a range of TFT products.
This single board solution enables an easy monitor and or video replacement with a large area TFT display.
The TIK has a wide input and automatic scaling range, up to WUXGA ( 1080x1920 pixels ) at 60Hz, and in all video
modes the full TFT screen is used.
Suitable applications include monitor replacement and adding additional monitors.
Features of the IES TFT interface kits:
Analogue RGB D-SUB and DVI ( Digital Video Interface ) Inputs
Audio in and out (2x3W 4ohm)
Single 12v DC input voltage
Built-in multi language On Screen Display ( OSD ) user interface
Multi-sync capability up to WUXGA resolution at 60Hz
Compatible standard VGA, SVGA, XGA, SXGA and UXGA VESA timing
IDS Display Accessories
New items
IES-SHIELD-GPS., Intelligent Embedded Solutions
GPS Plug-in Module (Shield) for Arduino
The IES-SHIELD-GPS and IES-SHIELD-GPAM modules are highly integrated multi-channel simultaneous GPS and GLONASS positioning systems. Both modules include programmable analogue input/digital GPIO. IES-SHIELD-GPAM additionally features an on-board 3-axis accelerometer. Although both modules have an Arduino-shield format, they can also be used with a Raspberry PI SBC. Both modules feature I2C communication with the host in order to leave the serial UART [Tx/Rx] port free for other functions e.g. wireless communication.
GPS data is stored within internal registers which are updated once per second and includes:
Latitude (i.e. vertical)
Longitude (i.e. horizontal)
Altitude (metres)
Time & date (UTC)
Heading (True)
Speed (kilometres per hour)
Satellites in view
The accelerometer of the IES-SHIELD-GPAM can be used to determine inclination for mobile robot applications.
Give your Arduino or Raspberry Pi robot the ability to know where it is, how fast its moving and in what direction.
Arduino Shield standard form factor for simple integration into any Arduino project
Fast position acquisition with battery back-up for fast Integral low power antenna
400kHz I2C communication interface
Jumper-selectable I2C address
Jumper-selectable I2C pull-ups (Not required for Raspberry Pi)
4 x I/O pins programmable as GPIO or analogue inputs for local sensors
GPS Status LED
3-axis acceleration, pitch and roll measurement (IES-SHIELD-GPAM RS
862-5708
only)
Replaceable CR1220 lithium back-up battery
Power supply: +7V to +16Vdc from Arduino Vin pin
Operating temperature range: 0 to +70°C
Dimensions: 56.25 x 53.5 x 20mm
Applications: Mobile robot navigation, vehicle security systems
New items
IES-SHIELD-STX4, Intelligent Embedded Solutions
Stepper-Motor Controller Plug-in Module (Shield) for Arduino
This 4-channel stepper-motor driver shield is designed for the Arduino UNO microcontroller board but is compatible with all other Arduino boards and the Raspberry Pi via the high speed I2C interface. Typical applications include humanoid and small, wheeled rover format robots.
Standard Arduino UNO Shield form factor
Each motor can be stepped in either direction a set number of steps at a set speed
Each motor can be continuously stepped at a set speed
Each motor can be stopped with holding torque or completely off
Selectable 1 or 2 phase excitation
8-bit set speed resolution
Up to 65535 set number of steps
4 shields can be linked together via I2C to control up to 16 motors
Supports all 5 to 12V unipolar (5/6-wire) stepper motors with a minimum winding resistance of 20Ω (250mA)
Communication via 400kHz serial I2C bus
Jumper-selectable I2C address
Jumper-selectable I2C pull-ups (Not required for Raspberry Pi)
Jumper-selectable motor power supply: +6V to +12V or +5V regulated
+5V,3A regulator with heatsink for motor and USB-A power supply
Up to four shields can be linked together via the I2C bus controlling up to 16 stepper-motors
Screw connector for power supply input
Power supply input: +6V to +12Vdc
USB socket provides power to an external circuit, e.g. a Raspberry PI SBC
Operating temperature range: 0 to +70°C
Dimensions: 56.25 x 53.5 x 15mm
Note
A suitable general purpose stepper motor is available under RS Part No.
368-0277
New items
IES-SHIELD-RGBW, Intelligent Embedded Solutions
4-Channel LED Lighting Shield for Arduino
This lighting shield is capable of driving four high-current channels each containing up to 12 LEDs in series. It is designed for the Arduino UNO but is compatible with all other Ardunio boards and the Raspberry Pi via the I2C interface. Suitable for a wide range of applications including room lighting, accent lighting and aquarium lighting. A built in aquarium mode simulates moonlight, daytime and night cycles using an internal 24 hour timer.
Arduino UNO shield standard form factor
Four LED channels each with 350mA constant-current drivers
Up to 12 LEDs in series per channel
Communication via 400kHz serial I2C bus
Jumper-selectable I2C address
Jumper-selectable I2C pull-ups (Not required for Raspberry Pi)
Up to four shields can be linked together via the I²C bus
Screw connector for LED power supply
Operating temperature range: 0 to +70°C
Dimensions: 56.25 x 53.5 x 12mm
Note
The supplied LED module will require a 12V @ 500mA power supply. As the shield uses a constant-current drive, the LED power supply voltage is given by the formula V = n x 4 where n is the number of series LEDs in a channel.
Supplied with
RGBW 4W 340lumen lighting module with heatsink, featuring OSRAM OSLON LEDs
New items
IES-TIK-AM-800600P6TMQW-A0H, Intelligent Embedded Solutions
IES Interface Kits for Ampire TFT LCD Displays
The IES range of TFT Interface Kits ( TIK ) is an advanced TFT LCD monitor control board, offering high quality images
on a range of TFT products.
This single board solution enables an easy monitor and or video replacement with a large area TFT display.
The TIK has a wide input and automatic scaling range, up to WUXGA ( 1080x1920 pixels ) at 60Hz, and in all video
modes the full TFT screen is used.
Suitable applications include monitor replacement and adding additional monitors.
Features of the IES TFT interface kits:
Analogue RGB D-SUB and DVI ( Digital Video Interface ) Inputs
Audio in and out (2x3W 4ohm)
Single 12v DC input voltage
Built-in multi language On Screen Display ( OSD ) user interface
Multi-sync capability up to WUXGA resolution at 60Hz
Compatible standard VGA, SVGA, XGA, SXGA and UXGA VESA timing
IDS Display Accessories
New items
IES-TIK-AM-1024768R2TNQW-00H, Intelligent Embedded Solutions
IES Interface Kits for Ampire TFT LCD Displays
The IES range of TFT Interface Kits ( TIK ) is an advanced TFT LCD monitor control board, offering high quality images
on a range of TFT products.
This single board solution enables an easy monitor and or video replacement with a large area TFT display.
The TIK has a wide input and automatic scaling range, up to WUXGA ( 1080x1920 pixels ) at 60Hz, and in all video
modes the full TFT screen is used.
Suitable applications include monitor replacement and adding additional monitors.
Features of the IES TFT interface kits:
Analogue RGB D-SUB and DVI ( Digital Video Interface ) Inputs
Audio in and out (2x3W 4ohm)
Single 12v DC input voltage
Built-in multi language On Screen Display ( OSD ) user interface
Multi-sync capability up to WUXGA resolution at 60Hz
Compatible standard VGA, SVGA, XGA, SXGA and UXGA VESA timing
IDS Display Accessories
New items
IES-SHIELD-GPAM., Intelligent Embedded Solutions
GPS Plug-in Module (Shield) for Arduino
The IES-SHIELD-GPS and IES-SHIELD-GPAM modules are highly integrated multi-channel simultaneous GPS and GLONASS positioning systems. Both modules include programmable analogue input/digital GPIO. IES-SHIELD-GPAM additionally features an on-board 3-axis accelerometer. Although both modules have an Arduino-shield format, they can also be used with a Raspberry PI SBC. Both modules feature I2C communication with the host in order to leave the serial UART [Tx/Rx] port free for other functions e.g. wireless communication.
GPS data is stored within internal registers which are updated once per second and includes:
Latitude (i.e. vertical)
Longitude (i.e. horizontal)
Altitude (metres)
Time & date (UTC)
Heading (True)
Speed (kilometres per hour)
Satellites in view
The accelerometer of the IES-SHIELD-GPAM can be used to determine inclination for mobile robot applications.
Give your Arduino or Raspberry Pi robot the ability to know where it is, how fast its moving and in what direction.
Arduino Shield standard form factor for simple integration into any Arduino project
Fast position acquisition with battery back-up for fast Integral low power antenna
400kHz I2C communication interface
Jumper-selectable I2C address
Jumper-selectable I2C pull-ups (Not required for Raspberry Pi)
4 x I/O pins programmable as GPIO or analogue inputs for local sensors
GPS Status LED
3-axis acceleration, pitch and roll measurement (IES-SHIELD-GPAM RS
862-5708
only)
Replaceable CR1220 lithium back-up battery
Power supply: +7V to +16Vdc from Arduino Vin pin
Operating temperature range: 0 to +70°C
Dimensions: 56.25 x 53.5 x 20mm
Applications: Mobile robot navigation, vehicle security systems
New items
IES-TIK-AM-1024600L2TMQW-01H, Intelligent Embedded Solutions
IES Interface Kits for Ampire TFT LCD Displays
The IES range of TFT Interface Kits ( TIK ) is an advanced TFT LCD monitor control board, offering high quality images
on a range of TFT products.
This single board solution enables an easy monitor and or video replacement with a large area TFT display.
The TIK has a wide input and automatic scaling range, up to WUXGA ( 1080x1920 pixels ) at 60Hz, and in all video
modes the full TFT screen is used.
Suitable applications include monitor replacement and adding additional monitors.
Features of the IES TFT interface kits:
Analogue RGB D-SUB and DVI ( Digital Video Interface ) Inputs
Audio in and out (2x3W 4ohm)
Single 12v DC input voltage
Built-in multi language On Screen Display ( OSD ) user interface
Multi-sync capability up to WUXGA resolution at 60Hz
Compatible standard VGA, SVGA, XGA, SXGA and UXGA VESA timing
IDS Display Accessories
Don’t hesitate to ask questions for better clarification.