Elga

Vision De-Ioniser Capable of taking mains pressure, it is useful when an in-line supply of pure water is needed. It uses disposable cartridges, with colour change exhaustion windows. Ideal for use where no regeneration or electrical supply is available. Vision 250 has approximately twice the absorption capacity of Vision 125. For both, max. flow rate is 60 l/hour, max. input pressure is 6 bar (90 psi), and connection ia via 1/2 BSP/hosetail., 437-008 (Vision 125) - HxWxD: 385x92x 110 mm, Wt. 2.5 kg, 437-014 (Vision 250) - HxWxD: 660x92x110 mm, Wt. 4.2 kg Stock Number 437-036 (for Version 250) & 437-020 (for Version 125) are replacement cartridges only. Ultra pure water Pure water Units Conductivity 1-0.1 10-1 μS/cm Resistivity 1 - 10 0.1-1 MΩ-cm Silica not removed ppm (mg/l) Carbon dioxide not removed ppm (mg/l) Trace dissolved metals ppm (mg/l) Residual solids ppm (mg/l) Average pH neutral 4-7 - Note Please note that Vision 250 and 125 Water De-Ioniser cartridges are non-recyclable and must be disposed of after use.

Water De-Ioniser - Replacement Cartridges A replacement cartridge for the ’Micromag’ de-ioniser. This produces ultra pure water from a domestic supply. The mixed bed cartridge of resin crystals will filter the water and remove contaminating ions such as carbonates (from lime), nitrates (from fertilizers), chlorides (from water treatment) and carbon dioxide (from the air). Max. flow rate 90l/hour Water conductivity 1.0 to 0.1 μS/cm Water resistivity 1 to 10 MΩcm Residual solids CO Silica Trace dissolved metals Average pH Neutral Output T.D.S 100 ppm 630l T.D.S 215 ppm 300l T.D.S 600 ppm 105l

Vision De-Ioniser Capable of taking mains pressure, it is useful when an in-line supply of pure water is needed. It uses disposable cartridges, with colour change exhaustion windows. Ideal for use where no regeneration or electrical supply is available. Vision 250 has approximately twice the absorption capacity of Vision 125. For both, max. flow rate is 60 l/hour, max. input pressure is 6 bar (90 psi), and connection ia via 1/2 BSP/hosetail., 437-008 (Vision 125) - HxWxD: 385x92x 110 mm, Wt. 2.5 kg, 437-014 (Vision 250) - HxWxD: 660x92x110 mm, Wt. 4.2 kg Stock Number 437-036 (for Version 250) & 437-020 (for Version 125) are replacement cartridges only. Ultra pure water Pure water Units Conductivity 1-0.1 10-1 μS/cm Resistivity 1 - 10 0.1-1 MΩ-cm Silica not removed ppm (mg/l) Carbon dioxide not removed ppm (mg/l) Trace dissolved metals ppm (mg/l) Residual solids ppm (mg/l) Average pH neutral 4-7 - Note Please note that Vision 250 and 125 Water De-Ioniser cartridges are non-recyclable and must be disposed of after use.

Vision De-Ioniser Capable of taking mains pressure, it is useful when an in-line supply of pure water is needed. It uses disposable cartridges, with colour change exhaustion windows. Ideal for use where no regeneration or electrical supply is available. Vision 250 has approximately twice the absorption capacity of Vision 125. For both, max. flow rate is 60 l/hour, max. input pressure is 6 bar (90 psi), and connection ia via 1/2 BSP/hosetail., 437-008 (Vision 125) - HxWxD: 385x92x 110 mm, Wt. 2.5 kg, 437-014 (Vision 250) - HxWxD: 660x92x110 mm, Wt. 4.2 kg Stock Number 437-036 (for Version 250) & 437-020 (for Version 125) are replacement cartridges only. Ultra pure water Pure water Units Conductivity 1-0.1 10-1 μS/cm Resistivity 1 - 10 0.1-1 MΩ-cm Silica not removed ppm (mg/l) Carbon dioxide not removed ppm (mg/l) Trace dissolved metals ppm (mg/l) Residual solids ppm (mg/l) Average pH neutral 4-7 - Note Please note that Vision 250 and 125 Water De-Ioniser cartridges are non-recyclable and must be disposed of after use.

Water De-Ioniser - Replacement Cartridges A replacement cartridge for the ’Micromag’ de-ioniser. This produces ultra pure water from a domestic supply. The mixed bed cartridge of resin crystals will filter the water and remove contaminating ions such as carbonates (from lime), nitrates (from fertilizers), chlorides (from water treatment) and carbon dioxide (from the air). Max. flow rate 90l/hour Water conductivity 1.0 to 0.1 μS/cm Water resistivity 1 to 10 MΩcm Residual solids CO Silica Trace dissolved metals Average pH Neutral Output T.D.S 100 ppm 630l T.D.S 215 ppm 300l T.D.S 600 ppm 105l

Vision De-Ioniser Capable of taking mains pressure, it is useful when an in-line supply of pure water is needed. It uses disposable cartridges, with colour change exhaustion windows. Ideal for use where no regeneration or electrical supply is available. Vision 250 has approximately twice the absorption capacity of Vision 125. For both, max. flow rate is 60 l/hour, max. input pressure is 6 bar (90 psi), and connection ia via 1/2 BSP/hosetail., 437-008 (Vision 125) - HxWxD: 385x92x 110 mm, Wt. 2.5 kg, 437-014 (Vision 250) - HxWxD: 660x92x110 mm, Wt. 4.2 kg Stock Number 437-036 (for Version 250) & 437-020 (for Version 125) are replacement cartridges only. Ultra pure water Pure water Units Conductivity 1-0.1 10-1 μS/cm Resistivity 1 - 10 0.1-1 MΩ-cm Silica not removed ppm (mg/l) Carbon dioxide not removed ppm (mg/l) Trace dissolved metals ppm (mg/l) Residual solids ppm (mg/l) Average pH neutral 4-7 - Note Please note that Vision 250 and 125 Water De-Ioniser cartridges are non-recyclable and must be disposed of after use.