Cole Hersee

Master Battery Disconnect Switch, 75920 Series The 79520 series master battery disconnect switch offers protection against battery drain and theft. It also allows personnel to Lock-Out Tag-Out by using a Hasp Lockout system or a suitable padlock. It can also be effectively used as an emergency power cut-off switch protecting personnel and vehicle systems. Designed for heavy-duty applications, these units are able to handle up to 300 A at 12 V dc. They are sealed to IP68 standards allowing them to be mounted in exposed locations. They are manufactured in a polymer housing and will not rust or corrode allowing them to be used in almost any environment. Potential Applications Heavy Truck Off-Road Emergency Vehicles Material Handling Mining Agricultural Marine Construction Features and Benefits High amperage capacity: 300 A at 12 V dc Can be used in high side or low side applications Ingress protection: IP68 Rust proof and non-corrosive construction Tested per SAE 1455 for salt, calcium chloride and magnesium chloride Large red knob is easy to operate with gloves 90° switch travel makes it easy to identify the switch position Large divider on base prevents accidental shorting of high energy cables Fits standard Master Disconnect mounting pattern Operating temperature range: -40°C to +85°C

Ignition Key Switch, 95060 Series This ignition key switch comes supplied with two keys which are booted. It has four positions with spring return from the Start position to the Ign/Acc position. It uses O-Rings and ultrasonic welds to provide IP67 sealing for the front and contact area (with connector fitted). The rear connector accepts the Deutsch DT06-6S connector or an equivalent compatible connector. Features and Benefits Contact rating: 10 A at 12 V dc/5 A at 24 V dc Sealed: Contacts sealed front and back to IP67 (with connector installed) Hardware: Plastic face nut and nickel plated brass backing nut Tested to SAE J259 for ignition switches Supplied with two matching keys, with boot

Master Battery Disconnect Switch, 75920 Series The 79520 series master battery disconnect switch offers protection against battery drain and theft. It also allows personnel to Lock-Out Tag-Out by using a Hasp Lockout system or a suitable padlock. It can also be effectively used as an emergency power cut-off switch protecting personnel and vehicle systems. Designed for heavy-duty applications, these units are able to handle up to 300 A at 12 V dc. They are sealed to IP68 standards allowing them to be mounted in exposed locations. They are manufactured in a polymer housing and will not rust or corrode allowing them to be used in almost any environment. Potential Applications Heavy Truck Off-Road Emergency Vehicles Material Handling Mining Agricultural Marine Construction Features and Benefits High amperage capacity: 300 A at 12 V dc Can be used in high side or low side applications Ingress protection: IP68 Rust proof and non-corrosive construction Tested per SAE 1455 for salt, calcium chloride and magnesium chloride Large red knob is easy to operate with gloves 90° switch travel makes it easy to identify the switch position Large divider on base prevents accidental shorting of high energy cables Fits standard Master Disconnect mounting pattern Operating temperature range: -40°C to +85°C

Ignition Key Switch, 95060 Series This ignition key switch comes supplied with two keys which are booted. It has four positions with spring return from the Start position to the Ign/Acc position. It uses O-Rings and ultrasonic welds to provide IP67 sealing for the front and contact area (with connector fitted). The rear connector accepts the Deutsch DT06-6S connector or an equivalent compatible connector. Features and Benefits Contact rating: 10 A at 12 V dc/5 A at 24 V dc Sealed: Contacts sealed front and back to IP67 (with connector installed) Hardware: Plastic face nut and nickel plated brass backing nut Tested to SAE J259 for ignition switches Supplied with two matching keys, with boot