Calog Instruments UK

Calog PRESSURE II Calibrator The Calog PRESSURE II is available with 30 bar sensor ( 829-8820 ), 100 bar sensor ( 885-6129 ) or 300 bar sensor ( 885-6123 ). Its speciality is pressure measurement and milliamp loop powered instruments which it can measure, source and simulate. DC voltage and circuit continuity can also be measured. Interchangeable pressure sensors enable users to effortlessly connect a wide range of pressure sensors. Features include simultaneous measurement of pressure and current for I/P testing. The pressure switch test feature ensures accurate and safe calibration of pressure switches. The Calog PRESSURE II logging facility stores data on the SD card supplied, which is easily downloaded from the SD card to a PC via the on-board USB port and is useable in most common spreadsheet formats. Its small size, Lithium Ion battery pack and high precision make this an instrument of choicel for industrial field calibration. Measure, source or simulate 0 to 24 mA Measure 0 to 32 Vdc Continuity test function Increment, step, auto step or ramp with built-in 24V power supply for mA loops Displays values in mA and % or % and mA Keller series PA-33x Digital Pressure sensors used Pressure readings in many different units: bar, mbar, kPa, MPa, psi, m H2O, in H2O, ft H2O, mm Hg, cm Hg, in Hg, kg/cm2, atm Logged data is downloaded via the on-board USB port Contains a simple pressure conversion menu Trend logging with programmable timebase of all measured values Supplied with Carry case, protective rubber boot, Li-ion battery, charger, test leads, SD card

Calog LC Display Handheld Loadcell Display Unit The Calog LC Display is a portable, hand-held unit which can display a Loadcell value.Its Lithium Ion battery enables the calibrator to be used for a reasonable period of time as a portable loadcell indicator in industrial plants or emergency situations. For longer applications, such as with a cattle scale, auxiliary power can be supplied via an external 12volt battery, charger or car cigarette lighter socket. In order to display mass, force, strain or torque from loadcells the unit allows the user to set the sensitivity in mV/V, range, decimal points and units. Zero trim can offset dead weight and span trim is available to increase the reading accuracy with the help of calibrated weights. Selections of software options such as tare, peak hold and auto zero maintenance are included. The indicator can be used for one 350 ohm loadcell or for three 1000 ohm loadcells with a fixed 5Vdc excitation. Portable, lightweight loadcell indicator Instant data logging Supplies a fixed 5Vdc excitation Supplied with Protective rubber boot, mains charger, 12Vdc (car lighter) charger, plastic kit case, binder (female, straight)

Calog LOOP II Handheld Calibrator The Calog LOOP II is a high precision, multi-function, hand-held calibrator designed for the process control industry. Its speciality is milliamp loop powered instruments which it can measure, source and simulate. DC voltage and circuit continuity can also be measured. Measure, source or simulate 0 to 24 mA Measure 0 to 32 Vdc Continuity test function Increment, step, auto step or ramp with built-in 24V power supply for mA loops Displays values in mA and % or % and mA Logged data is downloaded via the onboard USB port Trend logging with programmable timebase of all measured values Supplied with Carry case, protective rubber boot, Li-ion battery, charger, test leads, SD card

Calog PRESSURE II Calibrator The Calog PRESSURE II is available with 30 bar sensor ( 829-8820 ), 100 bar sensor ( 885-6129 ) or 300 bar sensor ( 885-6123 ). Its speciality is pressure measurement and milliamp loop powered instruments which it can measure, source and simulate. DC voltage and circuit continuity can also be measured. Interchangeable pressure sensors enable users to effortlessly connect a wide range of pressure sensors. Features include simultaneous measurement of pressure and current for I/P testing. The pressure switch test feature ensures accurate and safe calibration of pressure switches. The Calog PRESSURE II logging facility stores data on the SD card supplied, which is easily downloaded from the SD card to a PC via the on-board USB port and is useable in most common spreadsheet formats. Its small size, Lithium Ion battery pack and high precision make this an instrument of choicel for industrial field calibration. Measure, source or simulate 0 to 24 mA Measure 0 to 32 Vdc Continuity test function Increment, step, auto step or ramp with built-in 24V power supply for mA loops Displays values in mA and % or % and mA Keller series PA-33x Digital Pressure sensors used Pressure readings in many different units: bar, mbar, kPa, MPa, psi, m H2O, in H2O, ft H2O, mm Hg, cm Hg, in Hg, kg/cm2, atm Logged data is downloaded via the on-board USB port Contains a simple pressure conversion menu Trend logging with programmable timebase of all measured values Supplied with Carry case, protective rubber boot, Li-ion battery, charger, test leads, SD card

Calog PRESSURE II Calibrator The Calog PRESSURE II is available with 30 bar sensor ( 829-8820 ), 100 bar sensor ( 885-6129 ) or 300 bar sensor ( 885-6123 ). Its speciality is pressure measurement and milliamp loop powered instruments which it can measure, source and simulate. DC voltage and circuit continuity can also be measured. Interchangeable pressure sensors enable users to effortlessly connect a wide range of pressure sensors. Features include simultaneous measurement of pressure and current for I/P testing. The pressure switch test feature ensures accurate and safe calibration of pressure switches. The Calog PRESSURE II logging facility stores data on the SD card supplied, which is easily downloaded from the SD card to a PC via the on-board USB port and is useable in most common spreadsheet formats. Its small size, Lithium Ion battery pack and high precision make this an instrument of choicel for industrial field calibration. Measure, source or simulate 0 to 24 mA Measure 0 to 32 Vdc Continuity test function Increment, step, auto step or ramp with built-in 24V power supply for mA loops Displays values in mA and % or % and mA Keller series PA-33x Digital Pressure sensors used Pressure readings in many different units: bar, mbar, kPa, MPa, psi, m H2O, in H2O, ft H2O, mm Hg, cm Hg, in Hg, kg/cm2, atm Logged data is downloaded via the on-board USB port Contains a simple pressure conversion menu Trend logging with programmable timebase of all measured values Supplied with Carry case, protective rubber boot, Li-ion battery, charger, test leads, SD card

Calog PRESSURE II Calibrator The Calog PRESSURE II is available with 30 bar sensor ( 829-8820 ), 100 bar sensor ( 885-6129 ) or 300 bar sensor ( 885-6123 ). Its speciality is pressure measurement and milliamp loop powered instruments which it can measure, source and simulate. DC voltage and circuit continuity can also be measured. Interchangeable pressure sensors enable users to effortlessly connect a wide range of pressure sensors. Features include simultaneous measurement of pressure and current for I/P testing. The pressure switch test feature ensures accurate and safe calibration of pressure switches. The Calog PRESSURE II logging facility stores data on the SD card supplied, which is easily downloaded from the SD card to a PC via the on-board USB port and is useable in most common spreadsheet formats. Its small size, Lithium Ion battery pack and high precision make this an instrument of choicel for industrial field calibration. Measure, source or simulate 0 to 24 mA Measure 0 to 32 Vdc Continuity test function Increment, step, auto step or ramp with built-in 24V power supply for mA loops Displays values in mA and % or % and mA Keller series PA-33x Digital Pressure sensors used Pressure readings in many different units: bar, mbar, kPa, MPa, psi, m H2O, in H2O, ft H2O, mm Hg, cm Hg, in Hg, kg/cm2, atm Logged data is downloaded via the on-board USB port Contains a simple pressure conversion menu Trend logging with programmable timebase of all measured values Supplied with Carry case, protective rubber boot, Li-ion battery, charger, test leads, SD card

Calog LC Display Handheld Loadcell Display Unit The Calog LC Display is a portable, hand-held unit which can display a Loadcell value.Its Lithium Ion battery enables the calibrator to be used for a reasonable period of time as a portable loadcell indicator in industrial plants or emergency situations. For longer applications, such as with a cattle scale, auxiliary power can be supplied via an external 12volt battery, charger or car cigarette lighter socket. In order to display mass, force, strain or torque from loadcells the unit allows the user to set the sensitivity in mV/V, range, decimal points and units. Zero trim can offset dead weight and span trim is available to increase the reading accuracy with the help of calibrated weights. Selections of software options such as tare, peak hold and auto zero maintenance are included. The indicator can be used for one 350 ohm loadcell or for three 1000 ohm loadcells with a fixed 5Vdc excitation. Portable, lightweight loadcell indicator Instant data logging Supplies a fixed 5Vdc excitation Supplied with Protective rubber boot, mains charger, 12Vdc (car lighter) charger, plastic kit case, binder (female, straight)

Calog LOOP II Handheld Calibrator The Calog LOOP II is a high precision, multi-function, hand-held calibrator designed for the process control industry. Its speciality is milliamp loop powered instruments which it can measure, source and simulate. DC voltage and circuit continuity can also be measured. Measure, source or simulate 0 to 24 mA Measure 0 to 32 Vdc Continuity test function Increment, step, auto step or ramp with built-in 24V power supply for mA loops Displays values in mA and % or % and mA Logged data is downloaded via the onboard USB port Trend logging with programmable timebase of all measured values Supplied with Carry case, protective rubber boot, Li-ion battery, charger, test leads, SD card

Calog PRESSURE II Calibrator The Calog PRESSURE II is available with 30 bar sensor ( 829-8820 ), 100 bar sensor ( 885-6129 ) or 300 bar sensor ( 885-6123 ). Its speciality is pressure measurement and milliamp loop powered instruments which it can measure, source and simulate. DC voltage and circuit continuity can also be measured. Interchangeable pressure sensors enable users to effortlessly connect a wide range of pressure sensors. Features include simultaneous measurement of pressure and current for I/P testing. The pressure switch test feature ensures accurate and safe calibration of pressure switches. The Calog PRESSURE II logging facility stores data on the SD card supplied, which is easily downloaded from the SD card to a PC via the on-board USB port and is useable in most common spreadsheet formats. Its small size, Lithium Ion battery pack and high precision make this an instrument of choicel for industrial field calibration. Measure, source or simulate 0 to 24 mA Measure 0 to 32 Vdc Continuity test function Increment, step, auto step or ramp with built-in 24V power supply for mA loops Displays values in mA and % or % and mA Keller series PA-33x Digital Pressure sensors used Pressure readings in many different units: bar, mbar, kPa, MPa, psi, m H2O, in H2O, ft H2O, mm Hg, cm Hg, in Hg, kg/cm2, atm Logged data is downloaded via the on-board USB port Contains a simple pressure conversion menu Trend logging with programmable timebase of all measured values Supplied with Carry case, protective rubber boot, Li-ion battery, charger, test leads, SD card

Calog PRESSURE II Calibrator The Calog PRESSURE II is available with 30 bar sensor ( 829-8820 ), 100 bar sensor ( 885-6129 ) or 300 bar sensor ( 885-6123 ). Its speciality is pressure measurement and milliamp loop powered instruments which it can measure, source and simulate. DC voltage and circuit continuity can also be measured. Interchangeable pressure sensors enable users to effortlessly connect a wide range of pressure sensors. Features include simultaneous measurement of pressure and current for I/P testing. The pressure switch test feature ensures accurate and safe calibration of pressure switches. The Calog PRESSURE II logging facility stores data on the SD card supplied, which is easily downloaded from the SD card to a PC via the on-board USB port and is useable in most common spreadsheet formats. Its small size, Lithium Ion battery pack and high precision make this an instrument of choicel for industrial field calibration. Measure, source or simulate 0 to 24 mA Measure 0 to 32 Vdc Continuity test function Increment, step, auto step or ramp with built-in 24V power supply for mA loops Displays values in mA and % or % and mA Keller series PA-33x Digital Pressure sensors used Pressure readings in many different units: bar, mbar, kPa, MPa, psi, m H2O, in H2O, ft H2O, mm Hg, cm Hg, in Hg, kg/cm2, atm Logged data is downloaded via the on-board USB port Contains a simple pressure conversion menu Trend logging with programmable timebase of all measured values Supplied with Carry case, protective rubber boot, Li-ion battery, charger, test leads, SD card