Featured Products
This ACS certified float level switch is constructed with special components for use in drinking water applications. Thanks to its big switching...
The ATMI FIX-CAB cable tie which is an inexpensive and often overlooked accessory in installations. It is strongly recommended for the fixing of...
This hydrostatic level probe allows to measure and control height of stable or moving liquid, concerning surface water (rivers, lakes, canals, mu...
The ATMI PRISE ASTP alarm plug for all float level switches. The overflow alarm socket connected to float allows to alarm an overflow level or la...
This tilt level switch has been designed to provide high level measurement in silos or any other type of storage containers located in non-hazard...
This ATEX certified tilt level switch (CertificationATEX II 1 D Ex ia IIC T6) has been designed to provide high level measurement in silos or any...
The SOLIBA M is a small membrane level detector for non-explosive areas which detects the high, low and / or intermediate level in the hoppers or...
This small tubular float level sensor is equipped with a TEFLON cable and a specially designed PTFE housing for extremely aggressive liquids, suc...
The AQUA XL is a robust level regulator with internal ballast. As the liquid level reaches the regulator, the mechanical switch inside will tilt,...
The BIP STOP is a small float switch designed for the automatic control of small pumps (until 1.5 CV). Thanks to its wide switching angle of 110°...
The ATMI LESTS 175g counterweight which is loaded resin ballast for float and tilt level switches. The adjustable ballasts is to define the pivot...
This tilt level switch has been designed to provide high level measurement in silos or any other type of storage containers located in non-hazard...
Popular Categories For ATMI
Popular Items
Popular items
ATS165EPACS10M, ATMI
This ACS certified float level switch is constructed with special components for use in drinking water applications.
Thanks to its big switching angle of 165°, the ATS 165 protects the pump's engine and the electrical panels from jerking. This float the ideal solution for level control in tower tanks, for example.
Also, it can detect the both high and low level in the same tank whose hysteresis does not exceed 1.5 meter.
This float level switch can be connected directly to pumps up to 1.5 HP or through a relay if working with high power pumps.
Maximum pressure 3.5 bar
Maximum temperature 85°C
Protection index IP68
Popular items
FIXCAB, ATMI
The ATMI FIX-CAB cable tie which is an inexpensive and often overlooked accessory in installations. It is strongly recommended for the fixing of all suspended devices in order to avoid the deterioration of the outer sheath of the electric cables.
Polyamide housing
Maximum temperature 85°C
Popular items
PIEZOAS0-4mh20-10M, ATMI
This hydrostatic level probe allows to measure and control height of stable or moving liquid, concerning surface water (rivers, lakes, canals, muddy waters), thanks to its non-stick coating and its flush membrane.
The level measurement is carried out by measuring the differential pressure between the surface of the liquid and the position of the submerged transmitter. The pressure is converted into an electrical signal by piezo resistive technology and conditioned in a 4-20mA loop.
Precision 1 %
Voltage range 8 to 36 VDC
Popular items
PRISEASTP, ATMI
The ATMI PRISE ASTP alarm plug for all float level switches. The overflow alarm socket connected to float allows to alarm an overflow level or lack of water with integrated sound siren.
ABS housing
Audible alarm
Maximum temperature 50°C
Popular items
SOLIBA10M, ATMI
This tilt level switch has been designed to provide high level measurement in silos or any other type of storage containers located in non-hazardous areas.
Its operation is very simple: Vertically suspended at the desired high level point, the SOLIBA will tilt as the grain reaches the unit.
To secure your facilities at a minimum cost, the installation of a SOLIBA high level mechanical tilt level switch is strongly recommended, even if your facilities are already equipped with other types of equipment such as: rotating paddles, vibrating forks, radars, capacitive and ultrasonic sensors, etc.
The SOLIBA tilt level switch only operates when the high level is reached, unlike other types of level measurement devices that operate permanently
The tilt level switch must be installed at the opposite side of the arrival of grain and at a certain distance from the silo walls. This to ensure an optimal tilting operation.
Cut out power 20A
Maximum temperature 85 °C
Protection index IP68
Popular items
SOLIBAEXP10M, ATMI
This ATEX certified tilt level switch (CertificationATEX II 1 D Ex ia IIC T6) has been designed to provide high level measurement in silos or any other type of storage containers located in hazardous areas 20, 21, 22 (dust).
Its operation is very simple: Vertically suspended at the desired high level point, the SOLIBA EX P will tilt as the grain reaches the unit.
To secure your facilities at a minimum cost, the installation of a SOLIBA EX P high level mechanical tilt level switch is strongly recommended, even if your facilities are already equipped with other types of equipment such as: rotating paddles, vibrating forks, radars, capacitive and ultrasonic sensors, etc.
The SOLIBA EX P tilt level switch only operates when the high level is reached, unlike other types of level measurement devices that operate permanently
The tilt level switch must be installed at the opposite side of the arrival of grain and at a certain distance from the silo walls. This to ensure an optimal tilting operation.
This model is also available in a GP version (Gas & Dust). Please see SOLIBA EX GP ATEX certified.
Cut out power 10A
Maximum temperature 70 °C
Protection index IP68
Popular items
SOLIBAMS, ATMI
The SOLIBA M is a small membrane level detector for non-explosive areas which detects the high, low and / or intermediate level in the hoppers or small containers and the indications of stuffing in the endless wires and other types of transport.
Positioned inside of the hopper or silo, the SOLIBA M membran level detector is actuated by a membrane. The operation of the detector is the result of the pressure exerted by the bulk material against the membrane. It can be used for powdery and granular products with easy flow and with a specific weight between 0.3 and 2.5 t/m³.
The choice of a SOLIBA M level detector is highly recommended to secure your installations for a minimum cost, even if they are equipped with other types of equipment such as rotary paddles, vibrating blades, capacitive probes, ultrasound, radars, etc. .
Cut out power 15A
Maximum temperature 60 °C
Protection index IP40/53
Popular items
TUBA150C10M, ATMI
This small tubular float level sensor is equipped with a TEFLON cable and a specially designed PTFE housing for extremely aggressive liquids, such as for example sulfuric acid and very hot liquids reaching temperatures up to 125°C.
The TUBA 125 C level sensor has a ball inside a sealed polypropylene cylinder that will activate a microswitch according to its position. This principle is extremely reliable.
The small diameter of this float (Ø 40 mm) allows its introduction by small holes often placed on the vertical walls of the tanks.
Maximum pressure 1 bar
Maximum temperature 150°C
Protection index IP68
Popular items
AQUAMEDIUMPVC06M, ATMI
This robust level regulator is equipped with internal ballast. As the liquid level reaches the regulator, the mechanical switch inside will tilt, thus closing or opening a circuit connected to an electrical panel.
The AQUA MEDIUM is capable of penetrating the thick layers of grease found on waste water pumping stations, and it is the ideal level regulator for limited spaced applications.
This model is also available in a bigger version. See AQUA XL. The AQUA MEDIUM level regulator is not suitable for agitated liquids. Please choose our float switch models: BIP STOP, AT 120, or ATS 165.
Maximum pressure 3.5 bar
Maximum temperature 70°C
Protection index IP68
Popular items
AQUAMEDIUMPVC10M, ATMI
This robust level regulator is equipped with internal ballast. As the liquid level reaches the regulator, the mechanical switch inside will tilt, thus closing or opening a circuit connected to an electrical panel.
The AQUA MEDIUM is capable of penetrating the thick layers of grease found on waste water pumping stations, and it is the ideal level regulator for limited spaced applications.
This model is also available in a bigger version. See AQUA XL. The AQUA MEDIUM level regulator is not suitable for agitated liquids. Please choose our float switch models: BIP STOP, AT 120, or ATS 165.
Maximum pressure 3.5 bar
Maximum temperature 70°C
Protection index IP68
Popular items
AQUAXLPVC20M, ATMI
The AQUA XL is a robust level regulator with internal ballast. As the liquid level reaches the regulator, the mechanical switch inside will tilt, thus closing or opening a circuit connected to an electrical panel. Thanks to its heavy weight (775g), the AQUA XL is capable of penetrating the thick layers of grease found on waste water pumping stations
This model is also available in a smaller version for limited space applications. See AQUA MEDIUM.
The AQUA XL level regulator is not suitable for agitated liquids. Please choose our float switches models: BIP STOP, AT 120, or ATS 165.
Maximum pressure 2 bar
Maximum temperature 70°C
Protection index IP68
Popular items
BIPSTOPVRNEO5M, ATMI
The BIP STOP is a small float switch designed for the automatic control of small pumps (until 1.5 CV).
Thanks to its wide switching angle of 110°, the BIP STOP protects the pump's engine and the electrical panels from jerking. This feature is highly appreciated in agitated liquids.
Also, it can detect the both high and low level in the same tank whose hysteresis does not exceed 1.5 m.
These float level switches are used wherever magnetic level controllers can not be used because of impurities or deposits that may trap the float.
Maximum pressure 3.5 bar
Maximum temperature 85°C
Protection index IP68
New Items
New items
ATS165EPACS10M, ATMI
This ACS certified float level switch is constructed with special components for use in drinking water applications.
Thanks to its big switching angle of 165°, the ATS 165 protects the pump's engine and the electrical panels from jerking. This float the ideal solution for level control in tower tanks, for example.
Also, it can detect the both high and low level in the same tank whose hysteresis does not exceed 1.5 meter.
This float level switch can be connected directly to pumps up to 1.5 HP or through a relay if working with high power pumps.
Maximum pressure 3.5 bar
Maximum temperature 85°C
Protection index IP68
New items
FIXCAB, ATMI
The ATMI FIX-CAB cable tie which is an inexpensive and often overlooked accessory in installations. It is strongly recommended for the fixing of all suspended devices in order to avoid the deterioration of the outer sheath of the electric cables.
Polyamide housing
Maximum temperature 85°C
New items
PIEZOAS0-4mh20-10M, ATMI
This hydrostatic level probe allows to measure and control height of stable or moving liquid, concerning surface water (rivers, lakes, canals, muddy waters), thanks to its non-stick coating and its flush membrane.
The level measurement is carried out by measuring the differential pressure between the surface of the liquid and the position of the submerged transmitter. The pressure is converted into an electrical signal by piezo resistive technology and conditioned in a 4-20mA loop.
Precision 1 %
Voltage range 8 to 36 VDC
New items
PRISEASTP, ATMI
The ATMI PRISE ASTP alarm plug for all float level switches. The overflow alarm socket connected to float allows to alarm an overflow level or lack of water with integrated sound siren.
ABS housing
Audible alarm
Maximum temperature 50°C
New items
SOLIBA10M, ATMI
This tilt level switch has been designed to provide high level measurement in silos or any other type of storage containers located in non-hazardous areas.
Its operation is very simple: Vertically suspended at the desired high level point, the SOLIBA will tilt as the grain reaches the unit.
To secure your facilities at a minimum cost, the installation of a SOLIBA high level mechanical tilt level switch is strongly recommended, even if your facilities are already equipped with other types of equipment such as: rotating paddles, vibrating forks, radars, capacitive and ultrasonic sensors, etc.
The SOLIBA tilt level switch only operates when the high level is reached, unlike other types of level measurement devices that operate permanently
The tilt level switch must be installed at the opposite side of the arrival of grain and at a certain distance from the silo walls. This to ensure an optimal tilting operation.
Cut out power 20A
Maximum temperature 85 °C
Protection index IP68
New items
SOLIBAEXP10M, ATMI
This ATEX certified tilt level switch (CertificationATEX II 1 D Ex ia IIC T6) has been designed to provide high level measurement in silos or any other type of storage containers located in hazardous areas 20, 21, 22 (dust).
Its operation is very simple: Vertically suspended at the desired high level point, the SOLIBA EX P will tilt as the grain reaches the unit.
To secure your facilities at a minimum cost, the installation of a SOLIBA EX P high level mechanical tilt level switch is strongly recommended, even if your facilities are already equipped with other types of equipment such as: rotating paddles, vibrating forks, radars, capacitive and ultrasonic sensors, etc.
The SOLIBA EX P tilt level switch only operates when the high level is reached, unlike other types of level measurement devices that operate permanently
The tilt level switch must be installed at the opposite side of the arrival of grain and at a certain distance from the silo walls. This to ensure an optimal tilting operation.
This model is also available in a GP version (Gas & Dust). Please see SOLIBA EX GP ATEX certified.
Cut out power 10A
Maximum temperature 70 °C
Protection index IP68
New items
SOLIBAMS, ATMI
The SOLIBA M is a small membrane level detector for non-explosive areas which detects the high, low and / or intermediate level in the hoppers or small containers and the indications of stuffing in the endless wires and other types of transport.
Positioned inside of the hopper or silo, the SOLIBA M membran level detector is actuated by a membrane. The operation of the detector is the result of the pressure exerted by the bulk material against the membrane. It can be used for powdery and granular products with easy flow and with a specific weight between 0.3 and 2.5 t/m³.
The choice of a SOLIBA M level detector is highly recommended to secure your installations for a minimum cost, even if they are equipped with other types of equipment such as rotary paddles, vibrating blades, capacitive probes, ultrasound, radars, etc. .
Cut out power 15A
Maximum temperature 60 °C
Protection index IP40/53
New items
TUBA150C10M, ATMI
This small tubular float level sensor is equipped with a TEFLON cable and a specially designed PTFE housing for extremely aggressive liquids, such as for example sulfuric acid and very hot liquids reaching temperatures up to 125°C.
The TUBA 125 C level sensor has a ball inside a sealed polypropylene cylinder that will activate a microswitch according to its position. This principle is extremely reliable.
The small diameter of this float (Ø 40 mm) allows its introduction by small holes often placed on the vertical walls of the tanks.
Maximum pressure 1 bar
Maximum temperature 150°C
Protection index IP68
New items
AQUAXLPVC20M, ATMI
The AQUA XL is a robust level regulator with internal ballast. As the liquid level reaches the regulator, the mechanical switch inside will tilt, thus closing or opening a circuit connected to an electrical panel. Thanks to its heavy weight (775g), the AQUA XL is capable of penetrating the thick layers of grease found on waste water pumping stations
This model is also available in a smaller version for limited space applications. See AQUA MEDIUM.
The AQUA XL level regulator is not suitable for agitated liquids. Please choose our float switches models: BIP STOP, AT 120, or ATS 165.
Maximum pressure 2 bar
Maximum temperature 70°C
Protection index IP68
New items
BIPSTOPVRNEO5M, ATMI
The BIP STOP is a small float switch designed for the automatic control of small pumps (until 1.5 CV).
Thanks to its wide switching angle of 110°, the BIP STOP protects the pump's engine and the electrical panels from jerking. This feature is highly appreciated in agitated liquids.
Also, it can detect the both high and low level in the same tank whose hysteresis does not exceed 1.5 m.
These float level switches are used wherever magnetic level controllers can not be used because of impurities or deposits that may trap the float.
Maximum pressure 3.5 bar
Maximum temperature 85°C
Protection index IP68
New items
LEST175GRBS, ATMI
The ATMI LESTS 175g counterweight which is loaded resin ballast for float and tilt level switches. The adjustable ballasts is to define the pivot point of the float level switch. A ballast is particularly needed when the float is equipped with more than 1 meter of cable.
Unbreakable
More precise detection
New items
SOLIBA5M, ATMI
This tilt level switch has been designed to provide high level measurement in silos or any other type of storage containers located in non-hazardous areas.
Its operation is very simple: Vertically suspended at the desired high level point, the SOLIBA will tilt as the grain reaches the unit.
To secure your facilities at a minimum cost, the installation of a SOLIBA high level mechanical tilt level switch is strongly recommended, even if your facilities are already equipped with other types of equipment such as: rotating paddles, vibrating forks, radars, capacitive and ultrasonic sensors, etc.
The SOLIBA tilt level switch only operates when the high level is reached, unlike other types of level measurement devices that operate permanently
The tilt level switch must be installed at the opposite side of the arrival of grain and at a certain distance from the silo walls. This to ensure an optimal tilting operation.
Cut out power 20A
Maximum temperature 85 °C
Protection index IP68
Don’t hesitate to ask questions for better clarification.