Aoip Instrumentation Profile
AOIP Instrumentation, based in Orangis, France, is a private company founded in 1896 that deals with manufacturing, designing, and distributing test & measurement instruments and electric motor control products. The company has also provided technical calibration, assistance, and advice, as well as equipment maintenance & repair facilities for over a century. The electrical and electronic manufacturing company markets multifunction calibrators, ohmmeters, sensor accessories, and multiple ranges of test and measurement instrumentations for various industrial and research sectors. Besides the company’s extensive range of highly precise and easy-to-use instruments, AIOP also offers high-level software and services in training, installation, and metrological monitoring in industrial instrumentation research & development applications.
Featured Products
RTD PT100 TC6622 calibrator Single function temperature calibrator using resistance probes. Simulation of signals from a resistance probe and in...
AOIP OM 16 micro-ohmmeter for field use The OM16 micro-ohmmeter for field use is able to measure metallisation type...
AOIP OM 16 micro-ohmmeter Accessories A range of accessories for use with OM 16 micro-ohmmeter. Test Prob...
CALYS 75,Calibrator A complete tool able to measure and generate all manufacturing process signals: voltage, current, resistance, temperature by...
CALYS 50 calibrator Maintenance tool which gathers all of the signals in the manufacturing process: voltage, curren...
AOIP OM 16 micro-ohmmeter Accessories A range of accessories for use with OM 16 micro-ohmmeter. Test Probe AMT 00...
Soft Carrying Case AC6908 Soft carrying case for use with the TC 6621 and 6622 hand held instruments. Fea...
TC6621 thermocouple calibrator Single function temperature calibrator using thermocouples. Simulation of thermocoup...
Winding resistance tester resolution 10μΩ AOIP OM10 The OM10 micro-ohmmeter measures all resistances and windings f...
RTD PT100 TC6622 calibrator Single function temperature calibrator using resistance probes. Simulation of signals from a resistance probe and in...
RTD PT100 TC6622 calibrator Single function temperature calibrator using resistance probes. Simulation of signals f...
Winding resistance tester resolution 10μΩ AOIP OM10 The OM10 micro-ohmmeter measures all resistances and windings from 10 μΩ (resolution) → 50 k...
Popular Categories For Aoip Instrumentation
Categories For Aoip Instrumentation
Popular Items
Popular items
S102, Aoip Instrumentation
RTD PT100 TC6622 calibrator
Single function temperature calibrator using resistance probes.
Simulation of signals from a resistance probe and in Ohms.
Measurement of signals from a 4-wire resistance probe and in Ohms.
13 types of probes: Pt50, Pt100, Pt 200, Pt 500, Pt1000, JPT100, Ni100, Ni120, Ni1000, CU10, Cu50.
Automatic recognition of the number of wires connected.
Calibration of transmitters, taking measurements on site.
Quick simulation of resistive probes for application on latest generation recorders and transmitters.
Memorisation of 10,000 values with a trends and statistics curve.
Emission of ramps and increments to test the linearity and the range of transmitters, with retarder function.
Display on graphic screen with date and time and backlighting with adjustable contrast.
Display in °C, °F or corresponding value in Ohms.
Menus with online help and probe connection assistance.
Display resolution selectable up to 0.01 °C or 0.01 °F.
Impact proof sheathing.
Power supply: 4 AA batteries or battery / charger kit built into the back of the instrument.
USB socket for downloading.
Resistance:
0 → 4000 Ohms
Resolution:
0.001 Ohms
Accuracy:
0.012 %
Temperature for Pt100:
from ‒200 °C → 850 °C
Resolution:
0.01 °C
Accuracy:
0.012 % + 0.05 °C
Dimensions:
167 x 95 x 55 mm
Weight:
326 g
Popular items
AMT 006, Aoip Instrumentation
AOIP OM 16 micro-ohmmeter Accessories
A range of accessories for use with OM 16 micro-ohmmeter.
Test Probe AMT 005
Mounted on metallic rod with handle
5 m cord and locking socket adapted to the OM 16 micro-ohmmeter
Measurement is taken by pressing a point (voltage reading) mounted on a spring. This measurement is taken when the fixed concentric part (arrival of current) makes contact with the part to be measured.
Kelvin Clamp / Clip AMT 006
Fitted with a 5 m cord and a locking socket adapted to the OM16
Permanently takes a current of 10 A
Popular items
OM 17, Aoip Instrumentation
AOIP OM 16 micro-ohmmeter for field use
The OM16 micro-ohmmeter for field use is able to measure metallisation type or winding measurement low resistances on site and has a long battery life.
Measuring current of up to 10 A - Resolution 0.1 μΩ.
Ranges from 5 mΩ → 2500 Ω.
Choice of type of resistance measured - selfic or non-selfic.
DC measurement.
Measurement trigger: Manual or automatic.
Pliers and measurement points connected by locking sockets to avoid connection errors and unwanted disconnections.
Measurements on 4 wires of pure and highly selfic resistances such as:
- Power supply cable
- Earthing check:
- Mechanical connection:
- Engine, windings, high power transformers
-Metallisation and resistance of contacts
-Measurement on fuses
- Cable strands.
Recording of 1500 values with identification and reading on the display or using the LOG OM software.
Automatic compensation for EMF parasites, eliminating errors in measurement.
Display of the measured resistance value at a programmable temperature in °C, depending on the ambient temperature and the temperature coefficient of the metal being measured.
Power supply with quick-charge battery, providing 5000 measurements at 10A.
Integrated battery charger, 90 → 264 V / 45 → 420 Hz.
Rating
Resolution
Measuring current
Accuracy
5 mΩ
0.1 μΩ
10 A
0.05 % L+ 0.5 μΩ
25 mΩ
1 μΩ
10 A
0.05 % L+ 3 mΩ
250 mΩ
10 μΩ
10 A
0.05 % L+ 30 μΩ
2.5 Ω
100 μΩ
1 A
0.05 % L+ 0.3 mΩ
25 Ω
100mA
0.05 % L+ 3 mΩ
250 Ω
10 mΩ
10mA
0.05 % L+ 30 mΩ
250 Ω
100mΩ
1 mA
0.05 % L+ 300 mΩ
Operating temperature:
–10 °C → +55 °C (10 → 80% RH)
The device is protected against self measurement breaking currents
Dimensions (mm):
270 x 250 x 180 mm
Weight:
4 kg
Accessories needed:
AMT005:
double concentric Kelvin contact point;
Mounted on metallic rod with handle.
5 m cord and locking socket adapted to the OM16
The measurement is taken by pressing on a point (...
Popular items
CALYS 75, Aoip Instrumentation
CALYS 75,Calibrator
A complete tool able to measure and generate all manufacturing process signals: voltage, current, resistance, temperature by resistive probes and thermocouples, frequency, counting and measurement and simulation on dry contacts.
Dual display continuously shows the measurement value, the emitted value, and indicates the date, time and external temperature.
Drop-down menus and online help available.
Features the ultra simple "Easyconnect" system, which allows you to connect sockets, wires, banana plugs and security connectors, as well as flat thermocouple connectors.
Emission of ramps and steps to test linearity and transmitters with a delay function.
Graphic display with date and time, backlit display with contrast settings Display resolution may be selected with 1, 2 or 3 digits after the point.
Measurement statistics displayed: Minimum, Maximum and Average.
10,000 values may be stored.
Shockproof sheath.
Integrated valve test.
Scales quadratic signals.
Compatible with HART transmitters.
USB connection for downloading.
Supplied with measuring cables, strap, stand for desktop use and fitted with European plug.
VOLTAGE
Measurement 100 mV 0.001 mV 0.013 % + 2 μV
1 V 0.01 μV 0.013 % + 20 μV
10 V 0.1 μV 0.013 % + 200 μV
50 V 01 mV 0.013 % + 2 mV
Emission 100 mV 0.001 mV 0.013 % + 2 μV
2 V 0.01 μV 0.013 % + 20 μV
50 V 0.1 μV 0.013 % + 2 mV
CURRENT
Measurement 50 mA 0.001 mA 0.018 % + 2 μA
Emission 24 mA 0.001 mA 0.018 % + 2 μA
RESISTANCE
Measurement 400 Ω 0.001 Ω 0.012 % + 10 mΩ
4000 Ω 0.01 Ω 0.012 % + 100 mΩ
Emission 400 Ω 0.001 Ω 0.017 % + 20 mΩ
4000 Ω 0.01 Ω 0.017 % + 200 mΩ
FREQUENCY
Measurement 20 KHz 0.01 Hz 0.005 %
Emission 10 Hz 0.01 Hz 0.005 %
10 Hz 10 Hz 0.005 %
PT100
Measurement -210 → +850 °C 0.01 °C 0.012 % + 0.05 °C
Emission -210 → +850°C 0.02 °C 0.017 % + 0.08 °C
Type K Thermocouple
Measurement -250 → +1372 °C 0.05 °C 0...
Popular items
AN 6050, Aoip Instrumentation
CALYS 50 calibrator
Maintenance tool which gathers all of the signals in the manufacturing process: voltage, current, resistance, temperature using resistance probes and thermocouples, Frequency, counting and measurement and simulation of dry contacts.
Simultaneous measurement and emission.
Double display (measurement / emission) screen with indication of date / time and ambient temperature.
'Easyconnect", ultra simple connection system, which accepts sockets, bare wires, terminals and banana plugs as well as flat thermocouple connectors.
Graphic screen display with date and time, backlit with adjustable contrast. Selectable display resolution of 1, 2 or 3 digits after the decimal point.
Display of measurement statistics: Min, Max and Average.
Emission of ramps and increments to test the linearity and the range of transmitters, with retarder function.
Integrated valve test.
Scaling for quadratic and linear signals.
Scaling for sensor correction.
Compatible with HART transmitters.
USB port for downloading software.
Supplied with measurement wires, strap and stand.
VOLTAGE
Measurement 100 mV 0.001 mV 0.013 % + 2 μV
1 V 0.01 μV 0.013 % + 20 μV
10 V 0.1 μV 0.013 % + 200 μV
50 V 01 mV 0.013 % + 2 mV
Emission 100 mV 0.001 mV 0.013 % + 2 μV
2 V 0.01 μV 0.013 % + 20 μV
20 V 0.1μV 0.013 % + 200 μV
CURRENT
Measurement 50 mA 0.001 mA 0.018 % + 2 μA
Emission 24 mA 0.001 mA 0.018 % + 2 μA
RESISTANCE
Measurement 400 ohms 0.001 ohm 0.012 % + 10 mohms
4000 ohms 0.01 ohms 0.012 % + 100 mohms
Emission 400 ohms 0.001ohm 0.017 % + 20 mohms
4000 ohms 0.01 ohms 0.017 % + 200 mohms
FREQUENCY
Measurement 20 KHz 0.01 Hz 0.005 %
Emission 10 Hz 0.01 Hz 0.005 %
10 HZ 10 Hz 0.005 %
PT100
Measurement -210 → +850 °C 0.01 °C 0.012 % + 0.05 °C
Emission -210 → +850 °C 0.02 °C 0.017 % + 0.08 °C
Thermocouple K
Measurement -250 → +1372 °C 0.05 °C 0.013 % + 0.05 °C
Emission -250 → ...
Popular items
AMT 005, Aoip Instrumentation
AOIP OM 16 micro-ohmmeter Accessories
A range of accessories for use with OM 16 micro-ohmmeter.
Test Probe AMT 005
Mounted on metallic rod with handle
5 m cord and locking socket adapted to the OM 16 micro-ohmmeter
Measurement is taken by pressing a point (voltage reading) mounted on a spring. This measurement is taken when the fixed concentric part (arrival of current) makes contact with the part to be measured.
Kelvin Clamp / Clip AMT 006
Fitted with a 5 m cord and a locking socket adapted to the OM16
Permanently takes a current of 10 A
Popular items
AC6908, Aoip Instrumentation
Soft Carrying Case AC6908
Soft carrying case for use with the TC 6621 and 6622 hand held instruments.
Features and Benefits
Dimensions: 245 mm x 143 mm x 60 mm
Weight: 74 g
Popular items
TC6621, Aoip Instrumentation
TC6621 thermocouple calibrator
Single function temperature calibrator using thermocouples.
Simulation of thermocouple and mV signals.
Measurement of thermocouple and mV signals.
13 types of thermocouples: K, T, J, E, N, U, L, R, S, B, C, Pl, Mo.
Calibration of transmitters, taking measurements on site.
Memorisation of 10,000 values with a trends and statistics curve.
Emission of ramps and increments to test the linearity and the range of transmitters, with retarder function.
Possibility to correct probes by scaling.
Display on graphic screen with date and time and backlighting with adjustable contrast.
Display in °C, °F or corresponding value in Mv.
Menus with online help and probe connection assistance.
Display resolution selectable up to 0.1 °C or 0.1 °F.
Impact proof sheathing.
Power supply: 4 AA batteries or battery / charger kit built into the back of the instrument.
USB socket for downloading.
Technical specifications
Voltage:
0 → 80 mV
Resolution:
0.001 mV
Accuracy:
0.02 %
Temperature:
-250 → 1820 °C
Resolution:
0.1 °C
Accuracy:
0.02 %
Dimensions:
167 x 95 x 55 mm
Weight:
326 g
Popular items
AN 5806, Aoip Instrumentation
Winding resistance tester resolution 10μΩ AOIP OM10
The OM10 micro-ohmmeter measures all resistances and windings from 10 μΩ (resolution) → 50 kΩ.
Ranges from 500 mΩ → 50 kΩ.
Portable and self-contained field enclosure with stand for tabletop use.
Measurements on 4 wires for resistances such as:
- Power supply cable
- Weight continuity braid
- Contact resistance
- Mechanical connection (solder)
- Motor
- Transformer.
Automatic compensation for EMF parasites, eliminating errors in measurement.
Display of the measured resistance value at 20 °C, depending on the ambient temperature and the temperature coefficient of the metal being measured.
Power supply via integral rechargeable battery or mains power.
Delivered in carry case with instructions and mains charger adapter.
operating
rating
Resolution
measurement
class
500 mΩ
10 μΩ
100mA
0.1% L+ 30 μΩ
5 Ω
0.1 mΩ
10mA
0.1% L+ 0.3 mΩ
50 Ω
10mA
0.1% L+ 2 mΩ
500 Ω
10 mΩ
1 mA
0.1% L+ 20 mΩ
5 kΩ
0.1 Ω
0.1 mA
0.1% L+ 0.2 Ω
50 kΩ
1 Ω
0.01 mA
0.1% L+ 2 Ω
400 V
1V
-
1% L+1 V
Operating temperature:
–10 °C → +55 °C (10 → 80% of HR)
Protection resistance measurement peak 400 V, voltage measurement peak 600 V
The device is protected against self measurement breaking currents
Dimensions (mm):
120 x 65 x 245
Weight:
1.1 kg
Optional accessories:
-
AN5806 pair of Kelvin pliers measurement cables, gold-plated and each equipped with a flexible 2 m cable and 2 safety banana plugs for 4-wire measurement.
- max. Ø 12 mm, 10 A max. supported
Standards
EN 61010-1
Popular items
TC6622, Aoip Instrumentation
RTD PT100 TC6622 calibrator
Single function temperature calibrator using resistance probes.
Simulation of signals from a resistance probe and in Ohms.
Measurement of signals from a 4-wire resistance probe and in Ohms.
13 types of probes: Pt50, Pt100, Pt 200, Pt 500, Pt1000, JPT100, Ni100, Ni120, Ni1000, CU10, Cu50.
Automatic recognition of the number of wires connected.
Calibration of transmitters, taking measurements on site.
Quick simulation of resistive probes for application on latest generation recorders and transmitters.
Memorisation of 10,000 values with a trends and statistics curve.
Emission of ramps and increments to test the linearity and the range of transmitters, with retarder function.
Display on graphic screen with date and time and backlighting with adjustable contrast.
Display in °C, °F or corresponding value in Ohms.
Menus with online help and probe connection assistance.
Display resolution selectable up to 0.01 °C or 0.01 °F.
Impact proof sheathing.
Power supply: 4 AA batteries or battery / charger kit built into the back of the instrument.
USB socket for downloading.
Resistance:
0 → 4000 Ohms
Resolution:
0.001 Ohms
Accuracy:
0.012 %
Temperature for Pt100:
from ‒200 °C → 850 °C
Resolution:
0.01 °C
Accuracy:
0.012 % + 0.05 °C
Dimensions:
167 x 95 x 55 mm
Weight:
326 g
Popular items
AN6011, Aoip Instrumentation
RTD PT100 TC6622 calibrator
Single function temperature calibrator using resistance probes.
Simulation of signals from a resistance probe and in Ohms.
Measurement of signals from a 4-wire resistance probe and in Ohms.
13 types of probes: Pt50, Pt100, Pt 200, Pt 500, Pt1000, JPT100, Ni100, Ni120, Ni1000, CU10, Cu50.
Automatic recognition of the number of wires connected.
Calibration of transmitters, taking measurements on site.
Quick simulation of resistive probes for application on latest generation recorders and transmitters.
Memorisation of 10,000 values with a trends and statistics curve.
Emission of ramps and increments to test the linearity and the range of transmitters, with retarder function.
Display on graphic screen with date and time and backlighting with adjustable contrast.
Display in °C, °F or corresponding value in Ohms.
Menus with online help and probe connection assistance.
Display resolution selectable up to 0.01 °C or 0.01 °F.
Impact proof sheathing.
Power supply: 4 AA batteries or battery / charger kit built into the back of the instrument.
USB socket for downloading.
Resistance:
0 → 4000 Ohms
Resolution:
0.001 Ohms
Accuracy:
0.012 %
Temperature for Pt100:
from ‒200 °C → 850 °C
Resolution:
0.01 °C
Accuracy:
0.012 % + 0.05 °C
Dimensions:
167 x 95 x 55 mm
Weight:
326 g
Popular items
OM 10, Aoip Instrumentation
Winding resistance tester resolution 10μΩ AOIP OM10
The OM10 micro-ohmmeter measures all resistances and windings from 10 μΩ (resolution) → 50 kΩ.
Ranges from 500 mΩ → 50 kΩ.
Portable and self-contained field enclosure with stand for tabletop use.
Measurements on 4 wires for resistances such as:
- Power supply cable
- Weight continuity braid
- Contact resistance
- Mechanical connection (solder)
- Motor
- Transformer.
Automatic compensation for EMF parasites, eliminating errors in measurement.
Display of the measured resistance value at 20 °C, depending on the ambient temperature and the temperature coefficient of the metal being measured.
Power supply via integral rechargeable battery or mains power.
Delivered in carry case with instructions and mains charger adapter.
operating
rating
Resolution
measurement
class
500 mΩ
10 μΩ
100mA
0.1% L+ 30 μΩ
5 Ω
0.1 mΩ
10mA
0.1% L+ 0.3 mΩ
50 Ω
10mA
0.1% L+ 2 mΩ
500 Ω
10 mΩ
1 mA
0.1% L+ 20 mΩ
5 kΩ
0.1 Ω
0.1 mA
0.1% L+ 0.2 Ω
50 kΩ
1 Ω
0.01 mA
0.1% L+ 2 Ω
400 V
1V
-
1% L+1 V
Operating temperature:
–10 °C → +55 °C (10 → 80% of HR)
Protection resistance measurement peak 400 V, voltage measurement peak 600 V
The device is protected against self measurement breaking currents
Dimensions (mm):
120 x 65 x 245
Weight:
1.1 kg
Optional accessories:
-
AN5806 pair of Kelvin pliers measurement cables, gold-plated and each equipped with a flexible 2 m cable and 2 safety banana plugs for 4-wire measurement.
- max. Ø 12 mm, 10 A max. supported
Standards
EN 61010-1
New Items
New items
S102, Aoip Instrumentation
RTD PT100 TC6622 calibrator
Single function temperature calibrator using resistance probes.
Simulation of signals from a resistance probe and in Ohms.
Measurement of signals from a 4-wire resistance probe and in Ohms.
13 types of probes: Pt50, Pt100, Pt 200, Pt 500, Pt1000, JPT100, Ni100, Ni120, Ni1000, CU10, Cu50.
Automatic recognition of the number of wires connected.
Calibration of transmitters, taking measurements on site.
Quick simulation of resistive probes for application on latest generation recorders and transmitters.
Memorisation of 10,000 values with a trends and statistics curve.
Emission of ramps and increments to test the linearity and the range of transmitters, with retarder function.
Display on graphic screen with date and time and backlighting with adjustable contrast.
Display in °C, °F or corresponding value in Ohms.
Menus with online help and probe connection assistance.
Display resolution selectable up to 0.01 °C or 0.01 °F.
Impact proof sheathing.
Power supply: 4 AA batteries or battery / charger kit built into the back of the instrument.
USB socket for downloading.
Resistance:
0 → 4000 Ohms
Resolution:
0.001 Ohms
Accuracy:
0.012 %
Temperature for Pt100:
from ‒200 °C → 850 °C
Resolution:
0.01 °C
Accuracy:
0.012 % + 0.05 °C
Dimensions:
167 x 95 x 55 mm
Weight:
326 g
New items
OM 17, Aoip Instrumentation
AOIP OM 16 micro-ohmmeter for field use
The OM16 micro-ohmmeter for field use is able to measure metallisation type or winding measurement low resistances on site and has a long battery life.
Measuring current of up to 10 A - Resolution 0.1 μΩ.
Ranges from 5 mΩ → 2500 Ω.
Choice of type of resistance measured - selfic or non-selfic.
DC measurement.
Measurement trigger: Manual or automatic.
Pliers and measurement points connected by locking sockets to avoid connection errors and unwanted disconnections.
Measurements on 4 wires of pure and highly selfic resistances such as:
- Power supply cable
- Earthing check:
- Mechanical connection:
- Engine, windings, high power transformers
-Metallisation and resistance of contacts
-Measurement on fuses
- Cable strands.
Recording of 1500 values with identification and reading on the display or using the LOG OM software.
Automatic compensation for EMF parasites, eliminating errors in measurement.
Display of the measured resistance value at a programmable temperature in °C, depending on the ambient temperature and the temperature coefficient of the metal being measured.
Power supply with quick-charge battery, providing 5000 measurements at 10A.
Integrated battery charger, 90 → 264 V / 45 → 420 Hz.
Rating
Resolution
Measuring current
Accuracy
5 mΩ
0.1 μΩ
10 A
0.05 % L+ 0.5 μΩ
25 mΩ
1 μΩ
10 A
0.05 % L+ 3 mΩ
250 mΩ
10 μΩ
10 A
0.05 % L+ 30 μΩ
2.5 Ω
100 μΩ
1 A
0.05 % L+ 0.3 mΩ
25 Ω
100mA
0.05 % L+ 3 mΩ
250 Ω
10 mΩ
10mA
0.05 % L+ 30 mΩ
250 Ω
100mΩ
1 mA
0.05 % L+ 300 mΩ
Operating temperature:
–10 °C → +55 °C (10 → 80% RH)
The device is protected against self measurement breaking currents
Dimensions (mm):
270 x 250 x 180 mm
Weight:
4 kg
Accessories needed:
AMT005:
double concentric Kelvin contact point;
Mounted on metallic rod with handle.
5 m cord and locking socket adapted to the OM16
The measurement is taken by pressing on a point (...
New items
AMT 006, Aoip Instrumentation
AOIP OM 16 micro-ohmmeter Accessories
A range of accessories for use with OM 16 micro-ohmmeter.
Test Probe AMT 005
Mounted on metallic rod with handle
5 m cord and locking socket adapted to the OM 16 micro-ohmmeter
Measurement is taken by pressing a point (voltage reading) mounted on a spring. This measurement is taken when the fixed concentric part (arrival of current) makes contact with the part to be measured.
Kelvin Clamp / Clip AMT 006
Fitted with a 5 m cord and a locking socket adapted to the OM16
Permanently takes a current of 10 A
New items
CALYS 75, Aoip Instrumentation
CALYS 75,Calibrator
A complete tool able to measure and generate all manufacturing process signals: voltage, current, resistance, temperature by resistive probes and thermocouples, frequency, counting and measurement and simulation on dry contacts.
Dual display continuously shows the measurement value, the emitted value, and indicates the date, time and external temperature.
Drop-down menus and online help available.
Features the ultra simple "Easyconnect" system, which allows you to connect sockets, wires, banana plugs and security connectors, as well as flat thermocouple connectors.
Emission of ramps and steps to test linearity and transmitters with a delay function.
Graphic display with date and time, backlit display with contrast settings Display resolution may be selected with 1, 2 or 3 digits after the point.
Measurement statistics displayed: Minimum, Maximum and Average.
10,000 values may be stored.
Shockproof sheath.
Integrated valve test.
Scales quadratic signals.
Compatible with HART transmitters.
USB connection for downloading.
Supplied with measuring cables, strap, stand for desktop use and fitted with European plug.
VOLTAGE
Measurement 100 mV 0.001 mV 0.013 % + 2 μV
1 V 0.01 μV 0.013 % + 20 μV
10 V 0.1 μV 0.013 % + 200 μV
50 V 01 mV 0.013 % + 2 mV
Emission 100 mV 0.001 mV 0.013 % + 2 μV
2 V 0.01 μV 0.013 % + 20 μV
50 V 0.1 μV 0.013 % + 2 mV
CURRENT
Measurement 50 mA 0.001 mA 0.018 % + 2 μA
Emission 24 mA 0.001 mA 0.018 % + 2 μA
RESISTANCE
Measurement 400 Ω 0.001 Ω 0.012 % + 10 mΩ
4000 Ω 0.01 Ω 0.012 % + 100 mΩ
Emission 400 Ω 0.001 Ω 0.017 % + 20 mΩ
4000 Ω 0.01 Ω 0.017 % + 200 mΩ
FREQUENCY
Measurement 20 KHz 0.01 Hz 0.005 %
Emission 10 Hz 0.01 Hz 0.005 %
10 Hz 10 Hz 0.005 %
PT100
Measurement -210 → +850 °C 0.01 °C 0.012 % + 0.05 °C
Emission -210 → +850°C 0.02 °C 0.017 % + 0.08 °C
Type K Thermocouple
Measurement -250 → +1372 °C 0.05 °C 0...
New items
AN 6050, Aoip Instrumentation
CALYS 50 calibrator
Maintenance tool which gathers all of the signals in the manufacturing process: voltage, current, resistance, temperature using resistance probes and thermocouples, Frequency, counting and measurement and simulation of dry contacts.
Simultaneous measurement and emission.
Double display (measurement / emission) screen with indication of date / time and ambient temperature.
'Easyconnect", ultra simple connection system, which accepts sockets, bare wires, terminals and banana plugs as well as flat thermocouple connectors.
Graphic screen display with date and time, backlit with adjustable contrast. Selectable display resolution of 1, 2 or 3 digits after the decimal point.
Display of measurement statistics: Min, Max and Average.
Emission of ramps and increments to test the linearity and the range of transmitters, with retarder function.
Integrated valve test.
Scaling for quadratic and linear signals.
Scaling for sensor correction.
Compatible with HART transmitters.
USB port for downloading software.
Supplied with measurement wires, strap and stand.
VOLTAGE
Measurement 100 mV 0.001 mV 0.013 % + 2 μV
1 V 0.01 μV 0.013 % + 20 μV
10 V 0.1 μV 0.013 % + 200 μV
50 V 01 mV 0.013 % + 2 mV
Emission 100 mV 0.001 mV 0.013 % + 2 μV
2 V 0.01 μV 0.013 % + 20 μV
20 V 0.1μV 0.013 % + 200 μV
CURRENT
Measurement 50 mA 0.001 mA 0.018 % + 2 μA
Emission 24 mA 0.001 mA 0.018 % + 2 μA
RESISTANCE
Measurement 400 ohms 0.001 ohm 0.012 % + 10 mohms
4000 ohms 0.01 ohms 0.012 % + 100 mohms
Emission 400 ohms 0.001ohm 0.017 % + 20 mohms
4000 ohms 0.01 ohms 0.017 % + 200 mohms
FREQUENCY
Measurement 20 KHz 0.01 Hz 0.005 %
Emission 10 Hz 0.01 Hz 0.005 %
10 HZ 10 Hz 0.005 %
PT100
Measurement -210 → +850 °C 0.01 °C 0.012 % + 0.05 °C
Emission -210 → +850 °C 0.02 °C 0.017 % + 0.08 °C
Thermocouple K
Measurement -250 → +1372 °C 0.05 °C 0.013 % + 0.05 °C
Emission -250 → ...
New items
AMT 005, Aoip Instrumentation
AOIP OM 16 micro-ohmmeter Accessories
A range of accessories for use with OM 16 micro-ohmmeter.
Test Probe AMT 005
Mounted on metallic rod with handle
5 m cord and locking socket adapted to the OM 16 micro-ohmmeter
Measurement is taken by pressing a point (voltage reading) mounted on a spring. This measurement is taken when the fixed concentric part (arrival of current) makes contact with the part to be measured.
Kelvin Clamp / Clip AMT 006
Fitted with a 5 m cord and a locking socket adapted to the OM16
Permanently takes a current of 10 A
New items
AC6908, Aoip Instrumentation
Soft Carrying Case AC6908
Soft carrying case for use with the TC 6621 and 6622 hand held instruments.
Features and Benefits
Dimensions: 245 mm x 143 mm x 60 mm
Weight: 74 g
New items
TC6621, Aoip Instrumentation
TC6621 thermocouple calibrator
Single function temperature calibrator using thermocouples.
Simulation of thermocouple and mV signals.
Measurement of thermocouple and mV signals.
13 types of thermocouples: K, T, J, E, N, U, L, R, S, B, C, Pl, Mo.
Calibration of transmitters, taking measurements on site.
Memorisation of 10,000 values with a trends and statistics curve.
Emission of ramps and increments to test the linearity and the range of transmitters, with retarder function.
Possibility to correct probes by scaling.
Display on graphic screen with date and time and backlighting with adjustable contrast.
Display in °C, °F or corresponding value in Mv.
Menus with online help and probe connection assistance.
Display resolution selectable up to 0.1 °C or 0.1 °F.
Impact proof sheathing.
Power supply: 4 AA batteries or battery / charger kit built into the back of the instrument.
USB socket for downloading.
Technical specifications
Voltage:
0 → 80 mV
Resolution:
0.001 mV
Accuracy:
0.02 %
Temperature:
-250 → 1820 °C
Resolution:
0.1 °C
Accuracy:
0.02 %
Dimensions:
167 x 95 x 55 mm
Weight:
326 g
New items
AN 5806, Aoip Instrumentation
Winding resistance tester resolution 10μΩ AOIP OM10
The OM10 micro-ohmmeter measures all resistances and windings from 10 μΩ (resolution) → 50 kΩ.
Ranges from 500 mΩ → 50 kΩ.
Portable and self-contained field enclosure with stand for tabletop use.
Measurements on 4 wires for resistances such as:
- Power supply cable
- Weight continuity braid
- Contact resistance
- Mechanical connection (solder)
- Motor
- Transformer.
Automatic compensation for EMF parasites, eliminating errors in measurement.
Display of the measured resistance value at 20 °C, depending on the ambient temperature and the temperature coefficient of the metal being measured.
Power supply via integral rechargeable battery or mains power.
Delivered in carry case with instructions and mains charger adapter.
operating
rating
Resolution
measurement
class
500 mΩ
10 μΩ
100mA
0.1% L+ 30 μΩ
5 Ω
0.1 mΩ
10mA
0.1% L+ 0.3 mΩ
50 Ω
10mA
0.1% L+ 2 mΩ
500 Ω
10 mΩ
1 mA
0.1% L+ 20 mΩ
5 kΩ
0.1 Ω
0.1 mA
0.1% L+ 0.2 Ω
50 kΩ
1 Ω
0.01 mA
0.1% L+ 2 Ω
400 V
1V
-
1% L+1 V
Operating temperature:
–10 °C → +55 °C (10 → 80% of HR)
Protection resistance measurement peak 400 V, voltage measurement peak 600 V
The device is protected against self measurement breaking currents
Dimensions (mm):
120 x 65 x 245
Weight:
1.1 kg
Optional accessories:
-
AN5806 pair of Kelvin pliers measurement cables, gold-plated and each equipped with a flexible 2 m cable and 2 safety banana plugs for 4-wire measurement.
- max. Ø 12 mm, 10 A max. supported
Standards
EN 61010-1
New items
TC6622, Aoip Instrumentation
RTD PT100 TC6622 calibrator
Single function temperature calibrator using resistance probes.
Simulation of signals from a resistance probe and in Ohms.
Measurement of signals from a 4-wire resistance probe and in Ohms.
13 types of probes: Pt50, Pt100, Pt 200, Pt 500, Pt1000, JPT100, Ni100, Ni120, Ni1000, CU10, Cu50.
Automatic recognition of the number of wires connected.
Calibration of transmitters, taking measurements on site.
Quick simulation of resistive probes for application on latest generation recorders and transmitters.
Memorisation of 10,000 values with a trends and statistics curve.
Emission of ramps and increments to test the linearity and the range of transmitters, with retarder function.
Display on graphic screen with date and time and backlighting with adjustable contrast.
Display in °C, °F or corresponding value in Ohms.
Menus with online help and probe connection assistance.
Display resolution selectable up to 0.01 °C or 0.01 °F.
Impact proof sheathing.
Power supply: 4 AA batteries or battery / charger kit built into the back of the instrument.
USB socket for downloading.
Resistance:
0 → 4000 Ohms
Resolution:
0.001 Ohms
Accuracy:
0.012 %
Temperature for Pt100:
from ‒200 °C → 850 °C
Resolution:
0.01 °C
Accuracy:
0.012 % + 0.05 °C
Dimensions:
167 x 95 x 55 mm
Weight:
326 g
New items
AN6011, Aoip Instrumentation
RTD PT100 TC6622 calibrator
Single function temperature calibrator using resistance probes.
Simulation of signals from a resistance probe and in Ohms.
Measurement of signals from a 4-wire resistance probe and in Ohms.
13 types of probes: Pt50, Pt100, Pt 200, Pt 500, Pt1000, JPT100, Ni100, Ni120, Ni1000, CU10, Cu50.
Automatic recognition of the number of wires connected.
Calibration of transmitters, taking measurements on site.
Quick simulation of resistive probes for application on latest generation recorders and transmitters.
Memorisation of 10,000 values with a trends and statistics curve.
Emission of ramps and increments to test the linearity and the range of transmitters, with retarder function.
Display on graphic screen with date and time and backlighting with adjustable contrast.
Display in °C, °F or corresponding value in Ohms.
Menus with online help and probe connection assistance.
Display resolution selectable up to 0.01 °C or 0.01 °F.
Impact proof sheathing.
Power supply: 4 AA batteries or battery / charger kit built into the back of the instrument.
USB socket for downloading.
Resistance:
0 → 4000 Ohms
Resolution:
0.001 Ohms
Accuracy:
0.012 %
Temperature for Pt100:
from ‒200 °C → 850 °C
Resolution:
0.01 °C
Accuracy:
0.012 % + 0.05 °C
Dimensions:
167 x 95 x 55 mm
Weight:
326 g
New items
OM 10, Aoip Instrumentation
Winding resistance tester resolution 10μΩ AOIP OM10
The OM10 micro-ohmmeter measures all resistances and windings from 10 μΩ (resolution) → 50 kΩ.
Ranges from 500 mΩ → 50 kΩ.
Portable and self-contained field enclosure with stand for tabletop use.
Measurements on 4 wires for resistances such as:
- Power supply cable
- Weight continuity braid
- Contact resistance
- Mechanical connection (solder)
- Motor
- Transformer.
Automatic compensation for EMF parasites, eliminating errors in measurement.
Display of the measured resistance value at 20 °C, depending on the ambient temperature and the temperature coefficient of the metal being measured.
Power supply via integral rechargeable battery or mains power.
Delivered in carry case with instructions and mains charger adapter.
operating
rating
Resolution
measurement
class
500 mΩ
10 μΩ
100mA
0.1% L+ 30 μΩ
5 Ω
0.1 mΩ
10mA
0.1% L+ 0.3 mΩ
50 Ω
10mA
0.1% L+ 2 mΩ
500 Ω
10 mΩ
1 mA
0.1% L+ 20 mΩ
5 kΩ
0.1 Ω
0.1 mA
0.1% L+ 0.2 Ω
50 kΩ
1 Ω
0.01 mA
0.1% L+ 2 Ω
400 V
1V
-
1% L+1 V
Operating temperature:
–10 °C → +55 °C (10 → 80% of HR)
Protection resistance measurement peak 400 V, voltage measurement peak 600 V
The device is protected against self measurement breaking currents
Dimensions (mm):
120 x 65 x 245
Weight:
1.1 kg
Optional accessories:
-
AN5806 pair of Kelvin pliers measurement cables, gold-plated and each equipped with a flexible 2 m cable and 2 safety banana plugs for 4-wire measurement.
- max. Ø 12 mm, 10 A max. supported
Standards
EN 61010-1
Don’t hesitate to ask questions for better clarification.