Enrgtech

Deliver to

United Kingdom

Categories

Brands

Part Numbers

Top Products

0

0.0 / 5

Reviews 0 Not Rated Yet
ADAFRUIT INDUSTRIES Profile

Website
Manufacturer Type
Company Size
Location
Founded
Specialties
Reviews
5 star
(0%)
4 star
(0%)
3 star
(0%)
2 star
(0%)
1 star
(0%)

Be the first to review this manufacturer.
Don’t hesitate to ask questions for better clarification.

Featured Products


Popular Categories For ADAFRUIT INDUSTRIES


Categories For ADAFRUIT INDUSTRIES




New Items
New items
1555, ADAFRUIT INDUSTRIES

1555, ADAFRUIT INDUSTRIES

BeagleBone and BeagleBoard Enclosures These enclosures are machined to accept the popular beagle board and beaglebone black development boards. They are moulded in a choice of black, grey or translucent blue general purpose ABS plastic with a satin textured finish. The enclosure is machined to allow access to I/O connectors and often used controls and/or LEDS. The black & translucent blue plastic enclosures include black self tapping screws and the grey plastic enclosure includes nickel finished self tapping screws. Also included are four (4) self adhesive rubber feet and an instruction sheet. Note Development boards are NOT included.
New items
2019, ADAFRUIT INDUSTRIES

2019, ADAFRUIT INDUSTRIES

Accelerometers, Adafruit A series of Adafruit Accelerometers including the phenomenal MMA8451 ( 905-4665 ) Triple-Axis Accelerometer with 14-bit ADC. You can detect motion, tilt and basic orientation with a digital accelerometer - and the MMA8451 is a great accelerometer to start your journey with. Its usage range goes from +-2g up to +-8g yet is perfect to use with Arduino or another microcontroller. Also available is the much coveted LSM9DS0 by STMicroelectronics ( 905-4615 ). Inside are three sensors. One is a classic 3-axis accelerometer, which tells you which direction is down towards the Earth, or how fast the board is accelerating in 3D space. The other is a 3-axis magnetometer that senses where the strongest magnetic force is coming from. The third and final sensor is a 3-axis gyroscope that can measure spin and twist, making it perfect for your application. Finally, you can also add motion and direction sensing to your wearable FLORA project with the superb LSM303 by STMicroelectronics ( 905-4586 ) 3-axis Accelerometer+Compass sensor. Similar to the LSM9DS0, this model includes two sensors. The first being a 3-axis accelerometer, followed up by a 3-axis magnetometer. All models are highly reliable and excellent quality, so the choice is yours. Accelerometers, Adafruit
New items
1788, ADAFRUIT INDUSTRIES

1788, ADAFRUIT INDUSTRIES

Arduino Music Maker, Adafruit Now you can bend all audio files to your will with the Adafruit Music Maker shield for Arduino. This great shield features the VS1053, an encoding/decoding (codec) chip that decodes various audio formats such as MP3, AAC and FLAC. It can also be used to Record audio in both PCM (WAV) and compressed Ogg Vorbis. You are only limited by your own imagination by changing what you want, such as adjusting bass, treble, and volume digitally. Works with Arduino Uno, Mega, or Leonardo Full 3.3/5V level shifting for SD and MP3 chipsets Built in MIDI synth/drum machine with dozens of instruments 7 extra GPIO's that can be written or read through the Arduino Library for reading buttons or lighting LEDs Arduino Accessories Here at RS we have a wide range of accessories to support you with your Arduino projects. Books can help you to get started as well as help you connect devices to the Internet of Things. We have cases to house and protect your Arduino boards and connectivity accessories such as cables and antennas. Arduino Kits are a great starting point when prototyping and experimenting with projects, from the most basic breadboard and wire kits to kits featuring Arduino boards and electronic components.
New items
1304, ADAFRUIT INDUSTRIES

1304, ADAFRUIT INDUSTRIES

Micro Lipo - USB charger Adafruit have now created one of the smallest USB LiPo chargers available, so it is perfect to keep in any project box. Simply plug in the gold plated contacts into any USB port and a 3.7V/4.2V lithium polymer/lithium ion rechargeable battery into the JST plug on the other end. There are two LEDs - one red and one green. While charging, the red LED is lit. When the battery is fully charged and ready for use, the green LED turns on. Once you know all this, you are good to go. 5V input via PCB-style USB connector 2-pin JST cable included 100mA charge current, adjustable to 500mA by soldering a jumper closed USB
New items
1963, ADAFRUIT INDUSTRIES

1963, ADAFRUIT INDUSTRIES

Adafruit FONA - Mini Mobile Communications (Cellular) GSM Modules The Adafruit FONA MiniGSM is an all-in-one mobile phone (cellular) module that enables you to add voice, text, SMS and data to your project. Measuring just 4.45 x 3.18 mm (1.75"x1.25") it packs a surprising amount of technology into such a small module. It features the latest SIM800 GSM cellular module. Available with a choice of two connectors: Adafruit 1963 - Mobile Communication Module with SMA connector (RS 124-5475 ) Adafruit 1946 - Mobile Communication Module with uFL connector (RS 124-5474 ) - Quad-band 850/900/1800/1900MHz - Send and receive SMS messages - Send and receive GPRS data (TCP/IP, HTTP) - Make and receive voice calls using a headset via the oboard headphone socket or an external 8 Ω speaker and electret microphone. - Scan and receive FM radio broadcasts - PWM/Buzzer vibrational motor control (motor not included) - AT command interface with "auto baud" detection - Onboard LiPo battery charging circuitry enables you to recharge over micro-USB. LiPo or Li-ion battery with at least 500 mAh is recommended but not included. Two indicator LEDs show charge status. - Level shifting circuitry so you can run it with 2.8 V to 5 V logic. - SMA or uFL connection for external antenna (depending on version) - Indicator LEDs for power and network connectivity - Standard SIM card slides into the socket on the back Recommended Accessories SIM Card LiPo Battery – 500 mAh or larger (RS 791-6460 ) Micro USB cable for battery charging (RS 121-3251 ) External Antenna - SMA (RS 793-4376 ), uFL ( 704-3417 ) TRRS 4-Pole Headset - Any 'iPhone' or 'Android' compatible (but not iPhone original) or external electret mic and 8 Ω speaker Vibrating motor Note This module requires a microcontroller to drive it. An Arduino board is recommended but any 3 to 5 V microcontroller with a UART can send ...
New items
2000, ADAFRUIT INDUSTRIES

2000, ADAFRUIT INDUSTRIES

Adafruit Pro Trinket Mini Microcontrollers The Adafruit Pro Trinket is the bigger, more powerful sister of the Trinket (RS 124-5509 , 124-5506 ) with roughly 4 times the performance and GPIO. It uses the Atmel ATmega328P microcontroller, 28K of flash, 2K of RAM and 18 GPIO. It is basically and scaled down version of the Arduino UNO (RS 715-4081 ). Measuring only 38 mm x 18 mm x 2 mm (1.5" x 0.7" x 0.2") (without headers) it offers a great way to miniaturise your project. Pro Trinket is programmable using the Arduino IDE and 95% of Arduino projects work straight out of the box. There is a USB bootloader so you can plug it into any computer and reprogram just like an Arduino. You can also use an FTDI cable to connect to the FTDI port for a serial connection. The Adafruit Pro Trinket is available in two versions: Pro Trinket 3.3 V - 12 MHz (RS 124-5511 ) Pro Trinket 5 V - 16 MHz (RS 124-5507 ) - Micro-USB jack for power and/or USB uploading - On-board 3.3V power regulator with 150mA output capability and ultra-low dropout. Up to 16 V input, reverse-polarity protection, thermal and current-limit protection. - On-board green power LED and red pin #13 LED - Reset button for entering the bootloader or restarting the program. - Works with 99% of existing Arduino sketches (anything that doesn't use more than 28K, and doesn't require pins #2 and #7) - Mounting holes Note Due to its small size, you cannot stack an Arduino shield directly on top of the Pro Trinket. Adafruit Trinket Microcontrollers (MCU)
New items
2478, ADAFRUIT INDUSTRIES

2478, ADAFRUIT INDUSTRIES

Adafruit 2.4 inch TFT LCD Touchscreen Breakout Board with microSD Socket This colour 2.4” TFT display has 4 bright white LED backlight and 240 x 320 pixels with individual RGB pixel control. It has a resistive touchscreen to detect finger presses anywhere on the screen. The built-in controller has RAM buffering to take the workload away from the microcontroller. This display board has two modes: 8-bit and SPI. When using 8-bit mode, you need 8 digital data lines and 4 or 5 digital control lines to read and write to the display. SPI mode requires only 5 pins total (SPI data in, data out, clock, select, and dc) but is slower than 8-bit mode. In addition, 4 pins are required for the touch screen (2 digital, 2 analogue). If you are using SPI mode, you can also take advantage of the on-board micro-SD card socket. 4 white LED backlight, transistor connected so you can use PWM to dim the backlight 4-wire resistive touchscreen Screen Dimensions: 43 x 60 x 4 mm (1.7" x 2.4" x 0.16") PCB Dimensions: 53 x 60 x 4 mm (2.1" x 2.4" x 0.16") Weight: 30.5 g Adafruit LCD Touchscreens
New items
2871, ADAFRUIT INDUSTRIES

2871, ADAFRUIT INDUSTRIES

Adafruit NeoPixel NeoMatrix 8 x 8 RGBW LED Matrix The Adafruit NeoPixel NeoMatrix has 64 super bright LEDs in an 8 x 8 matrix. Each NeoPixel is 'split' with one half being RGB and the other is a white LED. This combined LED enables you to choose any colour or illuminate using with white light. Available in 3 colours of white light – warm white (3000K), neutral white (4500K) and warm white (6000K). If you need more, then you can also daisy chain NeoMatrix together. For the second matrix, connect the DIN connection to the first panel DOUT. There is a single data line with a timing-specific protocol. Since the protocol is sensitive to timing, it requires a real-time microcontroller such as an AVR, Arduino, PIC or mbed. Adafruit 2870 - NeoMatrix 64 RGBW, Warm White (RS 124-5496 ) Adafruit 2871 - NeoMatrix 64 RGBW, Neutral White (RS 124-5497 ) Adafruit 2872 - NeoMatrix 64 RGBW, Cool White (RS 124-5498 ) Dimensions: 71 x 71 x 3 mm / 2.8" x 2.8" 0.1" Weight: 24.2 g Arduino Shield versions with a 5 x 8 matrix are also available with the same colour temperature options (RS 124-5493 , 124-5494 , 124-5495 ). Adafruit LEDs, Drivers and Shields
New items
2895, ADAFRUIT INDUSTRIES

2895, ADAFRUIT INDUSTRIES

Adafruit Non-Latching Mini Relay FeatherWing FeatherWings add specific functionality to your Feather development board. They fit directly on top of your Feather using stacking header pins. The non-latching mini relay FeatherWing gives you control over power so you can now turn on and off various devices including lamps, fans, solenoids. In fact, you can switch power for many small appliances that run on up to 250 V ac but you need check the amount of power – 60 W or less. The non-latching relay, requires a single control pin, the SET pin. When set to high, the relay switches and a red LED lights. If power is lost then the relay will go back open. In terms of how much power, you can switch up to 2A of resistive current at up to 30 V dc or 40 V ac. At 110 V dc, switch up to 0.3A, at 120 V ac up to 0.5 A, and at 250 V ac you can switch up to 0.6A. Check the datasheet for more details. A 3-pin terminal block is supplied with this FeatherWing to wire it up with the device you are controlling and some light soldering is required. A Latching Relay FeatherWing is also available (RS 124-5527 ) but requires two signal pins. 50.8 x 22.9 x 11.4 mm / 2" x 0.9" x 0.45" Weight: 5.3 g Note If using with high voltages of more than 24 V, use care and common sense. High voltages require experience, and are only for use by engineers who are comfortable with guidelines and know how to use it safely. Adafruit FeatherWing Add-On Boards
New items
984, ADAFRUIT INDUSTRIES

984, ADAFRUIT INDUSTRIES

HRLV-EZx Series Maxbotix Ultrasonic Rangefinder Sensors HRLV-EZ Series Maxbotix Ultrasonic Rangefinders are high performance sensors with high resolution, excellent noise rejection, automatic calibration and factory set beam patterns. These small, lightweight sensor modules have three outputs: analogue voltage, digital PWM, and RS232 or TTL serial data. Typical applications include proximity zone detection, people detection, robotics ranging sensors, motion detectors and long range object detection. Three beam patterns are available, with the wide beam type being most suitable for small object and people detection, and the narrow beam width for large object detection. 124-5449 HRLV-MaxSonar-EZ0 Wide beam width 124-5450 HRLV-MaxSonar-EZ1 Intermediate beam width 124-5451 HRLV-MaxSonar-EZ4 Narrow beam width Features: • Resolution of 1 mm • 10 Hz reading rate • Maximum range of 5000 mm • Internal temperature compensation • Cost-effective solution where precision range-findings are needed • Operates from 2.5V-5.5V • Low 3.1 mA average current requirement • Operational Temperature from 0C to +65C • Real-time automatic calibration (voltage, humidity, ambient noise) • Firmware filtering for better noise tolerance and clutter rejection • RoHS compliant Sensors
New items
1386, ADAFRUIT INDUSTRIES

1386, ADAFRUIT INDUSTRIES

Adafruit Miniature TTL Serial JPEG Camera with NTSC Video Module This tiny camera module offers a great way to add a camera to your project. Designed primarily to be used in security systems. It outputs NTSC colour video and takes photographs of the video and transmits them over the TTL serial link. Choose from various image resolutions; 640 x 480, 320 x 240 or 160 x 120 pixels. They are pre-compressed JPEG image which reduces the file size and enables you to store a large number on an SD card. This module is perfect for a data-logging, security or photography project. This camera has automatic image adjustment features to give you the best possible outputs from your camera including white balance, brightness and contrast. The cameras motion detection provides the opportunity to capture images when something changes in the frame which again makes it great for surveillance projects. The lens is manually adjustable with a 1 metre to 15 metres focal distance which is good for most projects. Module size: 32 x 32 mm Image sensor: CMOS inch CMOS Pixels: 0.3M Pixel size: 5.6 um x 5.6 um Output format: Standard JPEG/M-JPEG White balance: Automatic Exposure: Automatic Gain: Automatic Shutter: Electronic rolling shutter SNR: 45DB Dynamic Range: 60DB Max analogue gain: 16DB Frame speed: 640 x 480 pixels @ 30 fps Scan mode: Progressive scan Viewing angle: 60° Monitoring distance: 10 metres, maximum 15 metres (adjustable) Image size: VGA (640*480), QVGA (320*240), QQVGA (160*120) Baud rate: Default 38400 Current draw: 75 mA Operating voltage: DC +5 V Communication: 3.3 V TTL (Three wire TX, RX, GND) Note This video module works with the Arduino UNOs (and other Atmega328-based Arduino) but are not yet MEGA compatible. Audio & Video
New items
1559, ADAFRUIT INDUSTRIES

1559, ADAFRUIT INDUSTRIES

Flora RGB Smart NeoPixel version 2 These updated Adafruit Flora NeoPixels have state-of-the-art technology, the ultra-bright LEDs have a constant-current driver cooked right into the LED package. The pixels are chainable, so you only need 1 pin/wire to control as many LEDs as you like. They are easy to sew, and the chainable design means no crossed threads. All models are highly reliable and excellent quality. Chainable design 800 KHz speed protocol Adafruit Colour Sensors