Enrgtech

Deliver to

United Kingdom

Categories

Brands

Part Numbers

Top Products

0

0.0 / 5

Reviews 0 Not Rated Yet
Pilz Profile

Website
Manufacturer Type
Company Size
Location
Founded
Specialties
Reviews
5 star
(0%)
4 star
(0%)
3 star
(0%)
2 star
(0%)
1 star
(0%)

Be the first to review this manufacturer.
Don’t hesitate to ask questions for better clarification.

Featured Products


Popular Categories For Pilz




New Items
New items
541009, Pilz

541009, Pilz

PSENcode Compact Non-Contact Safety Switch, Coded The PSEN cs3.1 and PSEN cs3.1p safety switches are coded and only switch with an actuator from the PSEN cs3.1 series. There is no restriction on the number of times the actuator can be used and reset. Features and Benefits Transponder technology for presence detection (safety function) Coded switch Dual-channel operation 2 safety inputs for series connection of multiple safety switches 2 safety outputs 1 signal output LED display for state of the actuator, state of the inputs and supply voltage/fault 1 direction of actuation IP69K protection Stock no. 918-6655 has an M12 8 pole male connector Stock no. 918-6664 has an M8 8 pole male connector Caution The safety level PLe (Cat. 4)/SIL CL 3 is only achieved if the safety outputs use 2-channel processing. Standards EN 60947-5-3 with the actuator PSEN cs3.1 PDDB; EN 62061 SIL CL 3; EN ISO 13849-1 PLe Cat. 4; EN ISO 14119 coding level Low, Type4. Approvals CE, cULus Listed, TÜV, BG, CCC. Supplied with Actuator.
New items
570502, Pilz

570502, Pilz

PSENslock Safety Gate System The PSENslock from Pilz is a non-contact safety gate system which combines safety gate monitoring and a non-contact magnetic interlock in a single unit. The combination of safe position monitoring and process guarding make the PSENslock suitable for universal use and the highest category applications. The magnetic guard locking device is largely non-wearing, compared with mechanical technologies. System optimised for safe position monitoring with process guarding Suitable for the highest safety requirements Highest level of manipulation protection (coding) Process protection through magnetic guard locking Four assembly directions Tolerant to gate misalignment Flexible connectors Optimised for mounting on to 45mm profiles User friendly diagnostics via double sided LED display Ideal for rugged industrial application as it is insensitive to dust and water (IP67) Long product service life as it is mechanically non-wearing
New items
774500, Pilz

774500, Pilz

PNOZ XV2 Safety Relay, Adjustable Time Delayed The PNOZ XV2 range of safety relays from PILZ offers you safety and performance of a top branded safety relay all in one. The PNOZ XV2 offers you different modes of operation such as single or dual channel switches. Suitable for several different applications which are listed below. Features and benefits: • DIN rail mounted with screw terminals • 2 instantaneous delay-on re-energised safety contacts • LED operating voltage displayed alongside switching psitions and also the reset circuit • Connections built in for safety limit switches, e-stops and more • Single or dual channel operation • Simple and fast wiring saving you time, effort and money long term • Save costs when exchanging units (there’s no need to rewire therefore you should eliminate potential wiring errors). • Electromechanical, potential-free Safety features • The circuit is redundant with built-in self-monitoring. • The safety function remains effective in the case of a component failure. • The correct opening and closing of the safety function relays is tested automatically in each on-off cycle. • International certification • Faster commissioning and simple wiring through units with plug-in terminals • High plant availability and short downtimes thanks to a convenient diagnostic options on the device Applications • E-STOP pushbuttons • Safety gate limit switches • Reset buttons Technical safety parameters • EN 60947-5-1 • EN 60204-1 • VDE 0113-1 Standards EN 60204-1, EN 62061, EN ISO 13849-1, VDE 0113-1, EN 60947-5-1. Approvals CE, cULus Listed, TÜV, KOSHA, CCC.
New items
772001, Pilz

772001, Pilz

PNOZmulti Mini Base Unit, Safety Controller The PNOZmulti Mini configurable safety relay from Pilz has an integral LCD display which provides status information and diagnostic messages. This safety controller has all the functions of the established PNOZmulti yet is only a space saving 45mm wide. A major advantage of the PNOZmulti Mini is that all required functions are configured directly via a PC running the PNOZmulti Configurator Software, instead of relying on wiring together different safety relays. 20 inputs 4 safe semiconductor outputs 4 test pulse outputs LCD display for information and diagnostics USB configuration interface Can be configured using the PNOZmulti Configurator Compatible with PNOZmulti Approvals UL/cUL, EC, TÜV, BG, CCC Safety Controller
New items
774709, Pilz

774709, Pilz

PNOZ X10, Dual Channel Introducing the PNOZ X10 range of safety relay from the well-known brand PILZ, manufacturer of many safety related monitoring products. The PNOZ X10 range is the top of its class offering you different modes of operation including, single, automatic and dual channel functions. You will find that the PNOZ X10 has many different applications that you can use that offer you versatility in the face of machine safety. Features and benefits • LED indicator statuses to support switching channel status between 1 or 2 signals & also for monitoring the supply voltage currently in the relay • Featuring 6 safety contacts (instantaneous) and 4 auxiliary contacts furthering the reliability of the machines safety output. • DIN rail mounting as standard • Single/Dual channel operation • Detection of short circuits across the contacts which can specifically detect earth faults and short circuiting. Safety features • The circuit is redundant with built in self-monitoring • Safety functions remain effective in the case of a component failure • Correct opening and closing of the safety functions is tested automatically at the end of each of the relays on/off safety cycles. • Your X10 is short circuit proof, using an electronic fuse on a DC supply provides this reliability. Applications • Emergency stop buttons • Safety gate limit switches • Reset buttons • Light barriers Technical safety parameters • EN 60947-5-1 • EN 60204-1 • VDE 0113-1
New items
540100, Pilz

540100, Pilz

PSENcode Large Non-Contact Safety Switch, Fully Coded The PSEN cs2.1p safety switch is fully coded and will only switch with an actuator from the PSEN cs2.1 series. The actuator must be taught and can be taught up to a maximum of 8 times but with only 1 actuator at a time. Series connection - you can connect more than 10 safety switches in sequence to Cat 4 of EN954-1 The switch reacts to a single actuator but can be taught a new actuator up to 8 times if operational damage occurs 5 directions of actuation M12 connection, 8-pin Note When the safety gate is closed the switch provides 2 N/C semiconductor outputs. Caution EN60947-5-3 standard is only met if entire system consisting of safety switch (PSENcode), actuator (PSENcode) and a safety monitoring module (PNOZ X or PNOZmulti) is used. Standards EN954-1 (Cat 4), EN60204-1, EN60947-5-3 Approvals CE, cULus Listed, TÜV, FCC, IC. Supplied with Actuator Approvals BG, cUL, CCC Caution EN60947-5-3 standard is only met if entire system consisting of safety switch (PSENcode), actuator (PSENcode) and a safety monitoring module (PNOZ X or PNOZmulti) is used
New items
570230, Pilz

570230, Pilz

PSENmech Safety Switch The PSENmech from Pilz is a mechanical safety switch with separate actuator, suitable for mounting on safety guards. The interlock switch is triggered if the guards are opened, stopping any hazardous machine movement via a Pilz evaluation device. Flexibility and speed during installation plus high plant availability Compact design Can be connected to all Pilz evaluation devices Up to four horizontal and four vertical approach directions Operating temperature -30 to +80°C Screw terminals M20 Plastic bodied design IP65 protection Standards VDE 0660 T100, EN 60947-1, VDE 0660 T200, EN 60947-5-1, IEC 60947-5-1 GS-ET-19 Approvals EC, BG, CCC, cCSAus Interlock Switch
New items
570312, Pilz

570312, Pilz

PSEN Safety Rope Pull Accessories A range of accessories to support the Pilz PSENrope safety rope pull switch.
New items
506405, Pilz

506405, Pilz

PSENmag Non Contact Switches, Square The PSENmag Non-contact Switch meets the highest safety requirements offers a complete solution that is safe and economical. It is approved up to PLe of EN ISO 13849-1, SIL 3 of EN/IEC 62061 and Category 4 of EN 954-1. Features and Benefits Connected via a plug connection or with cable Flexible cable outlet, including connector, so there is no need for an angled connector Flexible mounting, both the sensor and the actuator support every conceivable mounting configuration Cost effective thanks to series connection Operating distance of 3 mm or 10 mm Extra signal contact and LED Applications The PSENmag safety switch is suitable for use in applications with heavy soiling, thanks to its non-contact design. Note Only stock nos. 744-8702 and 824-4918 have an LED. Standards EN954-1 (Cat 4), EN60204-1, EN60947-5-3. Approvals CE, cULus Listed, TÜV. Supplied with Actuator.
New items
772171, Pilz

772171, Pilz

PNOZmulti 2 Motion Monitoring Modules The PNOZ m EF *MM expansion module connects to a base unit from the PNOZmulti 2 configurable control system. Two models are available: PNOZ m EF 1MM provides safe monitoring of one axis and PNOZ m EF 2MM provides safe monitoring of two independent axes. Features and Benefits Can be configured in the PNOZmulti Configurator Monitoring of 1 axis, stock no. 918-6617 Monitoring of two independent axes, stock no. 918-6611 Measured value recorded by proximity switch and encoder LED display for supply voltage, diagnostics, axis status and errors Support the safe drive function in accordance with EN 61800-5-2 Applications Safe speed monitoring (SSM) Safe speed range monitoring (SSRM) Safe direction of movement monitoring (SDIM) Safe operating stop monitoring (SOSM) Analogue voltage (track S) Standards EN ISO 13849-1 PLe; EN ISO 13849-1 Cat. 4; EN IEC 62061 SIL CL 3; IEC 61511 SIL 3. Approvals CE, cULus Listed, TÜV, BG, CCC. Supplied with Screw terminals. Safety Controller
New items
772132, Pilz

772132, Pilz

PNOZmulti 2 Communication/Fieldbus Module Profibus The PNOZ m ES Profibus expansion module connects to a base unit from the PNOZmulti 2 configurable control system. Features and Benefits Can be configured in the PNOZmulti Configurator Connection for PROFIBUSDP Station addresses from 0 ... 99, selected via rotary switch Status indicators for communication with PROFIBUSDP and for errors In the PNOZmulti Configurator, 128 virtual outputs of the PNOZmulti 2 control system can be defined for communication with the fieldbus PROFIBUSDP Maximum 1 PNOZ m ES Profibus can be connected to the base unit Transmission rate: maximum 12 Mbps Connection to fieldbus via female 9-pin D-Sub connector Approvals CE, cULus Listed, TÜV, BG, CCC. Supplied with Screw terminals. Safety Controller