Aim-TTi TGR6000 6GHz RF Signal Generator
The TGR6000 is a low-cost 6GHz signal generator intended for CW (carrier wave) applications where modulation is not required. Low phase noise is matched by low leakage, low residual FM and spurii. The internal timebase has a 1ppm stability, and an external frequency reference can be used. Sophisticated sweep functions enable the frequency and/or amplitude to be swept over the full range of each in a single sweep.
0MHz to 6000MHz frequency range
10Hz setability, +/-1ppm frequency stability
Locking to external frequency standard
-110dBm to +7dBm amplitude, 0.1dB steps
Fast stepping sweep with dwell times down to 10ms
List sweep of up to 1000 points of amplitude vs frequency
User compensation tables for specific test set-ups
Storage for 12 generator set-ups and 16 sweep lists
Compact half-rack 2U casing uses minimum bench space
Full remote control through RS232, USB, LAN and GPIB
Significantly lower cost than other 6GHz generators
Technical specification
Frequency
Frequency Range
10MHz to 6000MHz
Setting Resolution
10Hz by direct keyboard entry, or in user-set increments of 10Hz to 999999MHz by rotary control or increment–decrement keys
Phase Noise
500MHz Carrier:
3GHz Carrier:
6GHz Carrier:
Residual FM
Equivalent peak deviation for 300Hz to 3.4kHz B/W: 12Hz at 500MHz carrier
Settling Time
Reference Frequency
Internal or External (via rear panel BNC)
Internal Accuracy
+/- 1 ppm over 15°C to 30°C; +/- 2 ppm over 5°C to 40°C
Internal Stability
Internal Ref. Out
10MHz from 50 Ohms, amplitude 2V pk-pk into 50 Ohms
External Ref In
10MHz into 50 Ohms, amplitude 2V pk-pk to 5V pk-pk
Output Level
Level Range
–110dBm to +7dBm (0.1μV to 500mV into 50 Ohms)
Setting Resolution
0.1dB (or 0.01μV to 1mV) by direct keyboard entry, or in user-set increments of 0.1dB to 100dB (or 0.01μV to 100mV)
Accuracy
Better than ± 2...
