What are the shipping charges for products like Oscilloscope Probes?

Yes. We keep updating our stock frequently and if a product like Oscilloscope Probes is not in stock then we will let you know.

How do I contact the Customer Support Team?

Yes. We keep updating our stock frequently and if a product like Oscilloscope Probes is not in stock then we will let you know.

Where are your products like Oscilloscope Probes manufactured?

Yes. We keep updating our stock frequently and if a product like Oscilloscope Probes is not in stock then we will let you know.

Do you offer any discounts on bulk orders of products like Oscilloscope Probes?

Yes. We keep updating our stock frequently and if a product like Oscilloscope Probes is not in stock then we will let you know.

How long will it take to receive the order that I placed for Oscilloscope Probes?

Yes. We keep updating our stock frequently and if a product like Oscilloscope Probes is not in stock then we will let you know.

Are your products Oscilloscope Probes in stock?

Yes. We keep updating our stock frequently and if a product like Oscilloscope Probes is not in stock then we will let you know.

Oscilloscope Probes | Scope Probes

New items

15601, Testec

TT-SX 9001 - 30MHz active differential probe - x10 / x100 The Testec TT-SX 9001 High-Voltage Differential probes allow conventional earth-grounded oscilloscopes to be used for floating signal measurements - up to 700V differential or common mode voltage (x100). This model offers user selectable attenuation setting (x10 & x100), making the probe highly versatile and usable for a broad range of applications including power supply measurements and motor controls. This probe is compatible with any oscilloscope with a 1 MΩ BNC female input and feature up to 30 MHz of bandwidth. The probe can be powered by any oscilloscope USB port (USB Power Cord USB-A to USB-C included), internal batteries (4 x AA batteries), or USB power adapter, both not included in the scope of delivery. The probe is shipped standard with a factory calibration certificate. 30 MHz bandwidth Up to 700V differential (DC + pk AC) 1,000V CAT III rated cTUVus safety certified Voltage over range indicator Switchable attenuation ranges Multiple power options - batteries, oscilloscope, or mains Insulated BNC interface Protective rubber boot Applications power supply measurments motor controls product design applications automotive testing Supplied with/Kit contains: 2 x hook clips (red and black) 1 x USB Power Cord (1 m) - USB-A to USB-C 1 x calibration certificate What other Probes are available in this Testec range? TT-SX 9002 Approvals/Certification EN61010-031:2015 Ed. 2.0 EN61010-1:2010/AMD:2016 2014/35/EU EN61326-2013 2014/30/EU cTUVus CE UKCA RoHS 2 China RoHS2

Product Detail

New items

PPE4KV, LeCroy

Teledyne LeCroy PPE Series High Voltage Passive Probes LeCroy PPE series probes are suitable for a wide range of applications where high-voltage measurements must be made safely and accurately. New technology, using hybrid circuitry, minimizes ringing and overshoot to provide a precise response. The fixed-attenuation standard probes automatically re-scale any LeCroy 9300C or LC series oscilloscope for the appropriate attenuation factor of the probe. Note Probe Ring: PPE1.2KV = No; PPE20KV, PPE2KV, PPE4KV, PPE5KV, PPE6KV = Yes Cable Length: PPE20KV = 3m; PPE1.2KV, PPE2KV, PPE4KV, PPE5KV, PPE6KV = 2m PPE20KV peak voltage = 40kV Supplied with Trimming tool, sprung hook, IC insulating tip (red), insulating tip (red), ground lead (22cm), BNC adaptor, straight tip (0.8mm), spring contact tip (0.8mm), crocodile clip, flexible 4mm security adaptor, security ground lead

Product Detail

New items

PP022-1, LeCroy

Teledyne LeCroy Passive Probe PP022 Passive probes are the standard probe provided with most oscilloscopes. They are also sold as separate items and as replacements. The PP022 (PP022-1 single pack, PP022-2 two pack) has 500 MHz bandwidth, 10 pF input capacitance and 2.5 mm probe tip diameter. It is typical of passive probes in that it provides a 10:1 attenuation and features a high resistance of 10 MΩ. Its high input resistance makes the passive probe a choice instrument for low frequency signals, because circuit loading at such frequencies is minimised. Passive probes are designed to handle voltages of at least 400 V. The PP022 handles up to 500 V. Teledyne LeCroy passive probes feature an attenuation sense pin which activates the oscilloscope to scale waveforms automatically, with no operator input. Note The PP022 passive probe is compatible with Teledyne LeCroy WaveSurfer MXs-B and MSO MXs-B, WaveRunner 6 Zi and HRO 12-bit oscilloscopes. Using the appropriate passive probe with an oscilloscope means that the probe will be properly compensated across the entire bandwidth. Otherwise compensation will be for low frequencies only. Supplied with Ground lead with alligator clip, rigid probe tip (installed), rigid probe tip (replacement), short collar (installed), sprung hook, trimmer tool, long collar, IC tip insulators (black, brown, blue, green, grey - 1 off each), tip insulator 2.5 mm, probe tip cover, BNC adapter 2.5 mm, swivel ground lead, swivel ground lead adapter, ground spring, PCB adapter, spring tip, colour coding rings (yellow, red, green, blue - 2 off each) Passive Oscilloscope Probes Note All the products in this range are supplied for use with instruments with a permanent earth connection.

Product Detail

New items

PP017-1, LeCroy

Passive probes are the standard probe provided with most oscilloscopes. Typical passive probes provide a 10:1 attenuation and feature a high input resistance of 10 MΩ. This high input resistance means that passive probes are the ideal tool for low frequency signals since circuit loading at these frequencies is minimized. Passive probes are designed to handle voltages of at least 400V, some as high as 600V. Teledyne LeCroy passive probes feature an attenuation sense pin which tells the oscilloscope to scale the waveforms automatically requiring no user input. Each passive probe is recommended for a certain oscilloscope, using the right passive probe with the right oscilloscope means that the probe will be properly compensated across the entire bandwidth. Using probes with a different oscilloscope will only let you compensate for low frequencies. 250 MHz Passive Probe for HDO4000, 10:1, 10 Mohm Teledyne LeCroy High Definition Oscilloscopes

Product Detail

New items

PPE6KV, LeCroy

Teledyne LeCroy PPE Series High Voltage Passive Probes LeCroy PPE series probes are suitable for a wide range of applications where high-voltage measurements must be made safely and accurately. New technology, using hybrid circuitry, minimizes ringing and overshoot to provide a precise response. The fixed-attenuation standard probes automatically re-scale any LeCroy 9300C or LC series oscilloscope for the appropriate attenuation factor of the probe. Note Probe Ring: PPE1.2KV = No; PPE20KV, PPE2KV, PPE4KV, PPE5KV, PPE6KV = Yes Cable Length: PPE20KV = 3m; PPE1.2KV, PPE2KV, PPE4KV, PPE5KV, PPE6KV = 2m PPE20KV peak voltage = 40kV Supplied with Trimming tool, sprung hook, IC insulating tip (red), insulating tip (red), ground lead (22cm), BNC adaptor, straight tip (0.8mm), spring contact tip (0.8mm), crocodile clip, flexible 4mm security adaptor, security ground lead

Product Detail

New items

PP022-2, LeCroy

Teledyne LeCroy Passive Probe PP022 Passive probes are the standard probe provided with most oscilloscopes. They are also sold as separate items and as replacements. The PP022 (PP022-1 single pack, PP022-2 two pack) has 500 MHz bandwidth, 10 pF input capacitance and 2.5 mm probe tip diameter. It is typical of passive probes in that it provides a 10:1 attenuation and features a high resistance of 10 MΩ. Its high input resistance makes the passive probe a choice instrument for low frequency signals, because circuit loading at such frequencies is minimised. Passive probes are designed to handle voltages of at least 400 V. The PP022 handles up to 500 V. Teledyne LeCroy passive probes feature an attenuation sense pin which activates the oscilloscope to scale waveforms automatically, with no operator input. Note The PP022 passive probe is compatible with Teledyne LeCroy WaveSurfer MXs-B and MSO MXs-B, WaveRunner 6 Zi and HRO 12-bit oscilloscopes. Using the appropriate passive probe with an oscilloscope means that the probe will be properly compensated across the entire bandwidth. Otherwise compensation will be for low frequencies only. Supplied with Ground lead with alligator clip, rigid probe tip (installed), rigid probe tip (replacement), short collar (installed), sprung hook, trimmer tool, long collar, IC tip insulators (black, brown, blue, green, grey - 1 off each), tip insulator 2.5 mm, probe tip cover, BNC adapter 2.5 mm, swivel ground lead, swivel ground lead adapter, ground spring, PCB adapter, spring tip, colour coding rings (yellow, red, green, blue - 2 off each) Passive Oscilloscope Probes Note All the products in this range are supplied for use with instruments with a permanent earth connection.

Product Detail

New items

12040, Testec

Sensing heads Series HF Optional accessories Accessory kit for probes (Stock no.: 208-9279 ) Special accessories for probes (e.g. RS stock no.: 437-6569 ) Type TT-HF 112 TT-HF 212 TT-HF 212RA (readout) TT-HF 312 TT-HF 412 TT-HF 412RA (readout) TT-HF 512 TT-HF 512RA (readout) Stock no. 358-7869 358-7831 512-4757 358-7803 358-7825 512-4735 358-7796 512-4729 Bandwidth 40 MHz 300 MHz 30 / 300 MHz 350 MHz 500 MHz Separation factor 1:1 10:1 1:1 / 10:1 10:1 10:1 Rise time Input capacitance 45 pF 13.5 pF 47 / 15 pF 13.5 pF 9 pF Input resistance As oscilloscope 10 MΩ As oscilloscope / 10 MΩ 10 MΩ 10 MΩ Max. Input voltage 400 Vs 600 Vs 400 / 600 Vs 600 Vs 200 Vs Cable length 1.2 m 1.2 m 1.2 m 1.2 m 1.2 m Passive Oscilloscope Probes Note All the products in this range are supplied for use with instruments with a permanent earth connection.

Product Detail

New items

68.9433-28, Multi Contact

Isoprobe IV 10:1 500MHz test probe set, CAT III Isoprobe IV 10:1 500MHz test probe set, comprising of a an Isoprobe IV 10:1 500Mhz test lead and a comprehensive assortment of accessories for use with the primary lead, including insulating sleeve, hook clip, uninsulated push-on BNC adaptor and more. The Isoprobe test lead is built on a highly flexible PVC insulated coaxial lead with a BNC plug with built in compensation unit and a wide frequency range combined with low input resistance and a facility for connecting the reference lead in to the front part of the probe. Rated voltage 1000V, CAT III (600V CAT IV) (Max.3540 V, CAT I) Dividing ratio 10:1 Input capacitance 11 pF Input resistance 10 MΩ Frequency range 0-500 Mhz 120cm in length Isoprobe IV 10:1 500MHz test probe set, CAT III Kit Contents 8.9366-120-28 - IsoProbe IV 10:1 68.9444-015-21 - GM400 reference lead with crocodile clip 68.9369-28 - HC400 push on hook clip 68.9443-21 - GS400 push on reference clip 68.9376 - BA400 push on BNC adaptor 68.9513 - SCC coloured clips for IsoProbe lead Multi-Contact Test Kits

Product Detail

New items

ZS2500, LeCroy

Teledyne LeCroy ZS Series High Impedance Active Probes The Teledyne LeCroy ZS Series of easy-to-use probes provides high impedance and an extensive set of probe tips and ground accessories to handle wide-ranging probing scenarios. The high 1 MΩ input resistance and low 0.9 pF (0.6 pF with ZS4000) input capacitance means these probes are excellent for all frequencies. The ZS Series probes provide full system bandwidth with all Teledyne LeCroy oscilloscopes with bandwidths of 4 GHz and lower. Small form combines with an extensive standard range of tip accessories to facilitate use in challenging situations as well as in probing test points spaced apart. High signal fidelity to 4 GHz bandwidth Low circuit loading – high input impedance and low capacitance Choice of 4 GHz, 2.5 GHz and 1 GHz models 1 MΩ input resistance 0.6 pF (4 GHz) and 0.9 pF input capacitance ± 8 V input dynamic range, ± 12 V offset range Integrated with oscilloscope (ProBus interface for control from oscilloscope front panel) Wide variety of tips and grounds included Supplied with Square pin adapter, IC tip, bent tip, channel ID clips (set of 4 colours), copper tape pad (x2), freehand probe holder, ground blade (narrow), ground blade (wide), micro-grabber (pair), offset ground-Z lead, pogo ground lead, pogo tip, probe tip - standard (x3), right angle lead (long), right angle lead (short), right angle socket, straight pin lead (long), straight pin lead (short), Y-lead adapter

Product Detail

New items

SUP2-MSO, Tektronix

The Tektronix SUP2-MSO bundle adds MSO function with 16 digital channels. Includes P6316 digital probe and accessories

Product Detail

New items

FLUKE VPS210-G, Fluke

ScopeMeter 190 Series Accessories Note For Oscilloscope 190 204 series Carrying Case kit see RS stock 716-7416 manufacturers part number SCC290 This product has a non UK main plug please refer to RS Stock no. 480-4143 (replacement battery charger)

Product Detail

New items

HVD3102, LeCroy

Teledyne LeCroy High Voltage Differential Probe HVD3102 The 25MHz HVD3102 ( 851-3093 ) high-voltage active differential probe is safe, easy-to-use and ideally suited for power electronics measurements. The CMRR is exceptional out to very high frequencies. This greatly assists in measuring signals in the noisy, high common-mode environments typical of power electronics activities. The high CMRR combined with low probe noise and high offset capability makes the HVD3102 capable of measuring very small control signals floating on high common-mode voltages. The25MHz HVD3102-NOACC ( 901-0980 ) comes without tip accessories. Replacement accessories kit PK-HV-001 ( 901-1043 ) is available separately and includes 2 each (1 black, 1 red) of: safety alligator clips, plunger pincer clips, plunger hook clips, plunger alligator clips and spade terminals. Differential voltage measurement capability up to 1000 Vrms Exceptional common-mode rejection ratio (CMRR) across a broad frequency range Wide differential voltage range of 1500 Vp-p, 2000 Vp-p before saturation for capture of short duration overshoots High offset capability at both high and low attenuation 1% DC and low frequency gain accuracy ProBus active probe interface with automatic scaling Auto-zero capabilities Supplied with 1x red, 1x black of each of spade terminal, safety alligator clip, plunger alligator clip, plunger pincer clip, plunger hook clip; soft accessory case; operator's manual; certificate of calibration (851-3093 only, 901-1043 comes without tip accessories)

Product Detail