What are the shipping charges for products like Mixed Signal Oscilloscopes?

Yes. We keep updating our stock frequently and if a product like Mixed Signal Oscilloscopes is not in stock then we will let you know.

How do I contact the Customer Support Team?

Yes. We keep updating our stock frequently and if a product like Mixed Signal Oscilloscopes is not in stock then we will let you know.

Where are your products like Mixed Signal Oscilloscopes manufactured?

Yes. We keep updating our stock frequently and if a product like Mixed Signal Oscilloscopes is not in stock then we will let you know.

Do you offer any discounts on bulk orders of products like Mixed Signal Oscilloscopes?

Yes. We keep updating our stock frequently and if a product like Mixed Signal Oscilloscopes is not in stock then we will let you know.

How long will it take to receive the order that I placed for Mixed Signal Oscilloscopes?

Yes. We keep updating our stock frequently and if a product like Mixed Signal Oscilloscopes is not in stock then we will let you know.

Are your products Mixed Signal Oscilloscopes in stock?

Yes. We keep updating our stock frequently and if a product like Mixed Signal Oscilloscopes is not in stock then we will let you know.

Mixed Signal Oscilloscopes | Oscilloscopes & Accessories

New items

HMO1102, Rohde & Schwarz

Hameg HMO1002 Series Digital Oscilloscope The HMO1002 Series digital oscilloscopes are in the Hameg Value Instruments product range. They feature a high waveform update rate and high vertical sensitivity. The fanless instruments offer a sampling rate of 1 Gs/s and a memory depth of 1 Ms. Models available are the 50 MHz HMO1002 ( 871-1297 ), 70 MHz HMO1072 ( 871-1290 ) and 100 MHz HMO1102 ( 871-1294 ). These models offer time domain, logic, protocol and frequency analysis in a single instrument. They contain a wide range of upgrade options. 1 Gs/s real time sampling rate 1 Ms memory depth High vertical sensitivity down to 1 mV/div Low noise measurement because of state-of-the-art A/D converter QuickView and QuickMath for fastest access to the most demanding functions Serial bus trigger and hardware accelerated decode: I2C, SPI, UART/RS-232, CAN, LIN Dedicated education mode Built-in MSO capability Built-in pattern generator, digital voltmeter, production tester, function generator, component tester capabilities Note 2 probes are supplied and replacement probes are available separately, HZ154 ( 388-571 ). Supplied with Power cord, switchable probe HZ154 (x2), adapter BNC plug/4mm banana socket HZ20, printed operating manual, CD-ROM with software Hameg HMO series Oscilloscopes

Product Detail

New items

HMO2024, Rohde & Schwarz

Hameg HMO Compact Series The Hameg HMO Compact is a series of compact, powerful and scaleable oscilloscopes. Shallower depth (1400 mm) is combined with the same 1650 mm VGA display as established Hameg models, featuring LED background lighting and extra-wide viewing angle. Frequently-used functions can be addressed at the push of a button, keeping menu depth low and operation simple. Trigger functions can also quickly be selected using the dedicated pushbuttons Source, Mode and Condition. High (real time) sampling rates, memory depths and sensitivity give the HMO Compact models a competitive edge in their price range (HMO models hold maximum sampling rate down to a time base of 1 ms). 2 GSa/s real time, low noise flash A/D converter (Reference Class) 2 MPts memory, memory zoom up to 50,000:1 Serial bus trigger and hardware accelerated decode including List View Automatic search for user defined events Pass/Fail test based on masks Vertical sensitivity 1 mV/div Offset control ±0.2...±20 V (150 MHz and 200 MHz devices only) 12 div x-Axis display range, 20 div y-Axis display range (VirtualScreen) Trigger modes: Slope, Video, Pulsewidth, Logic, Delayed, Event Component tester, 6 digit counter Auto-measurement maximum 6 parameters including Statistic, Formula Editor, Ratiocursor FFT 64 kPts Silence redefined fan 3 x USB for mass storage, printer and remote control Note Probes are supplied with the scope and replacement probes are available separately, HZ154 ( 388-571 ). Supplied with Power cord, switchable probe HZ154 (1 per channel), USB/RS-232 interface HO720, printed operating manual, CD-ROM with software, driver, manual and additional information Hameg HMO series Oscilloscopes

Product Detail

New items

HMO1072, Rohde & Schwarz

Hameg HMO1002 Series Digital Oscilloscope The HMO1002 Series digital oscilloscopes are in the Hameg Value Instruments product range. They feature a high waveform update rate and high vertical sensitivity. The fanless instruments offer a sampling rate of 1 Gs/s and a memory depth of 1 Ms. Models available are the 50 MHz HMO1002 ( 871-1297 ), 70 MHz HMO1072 ( 871-1290 ) and 100 MHz HMO1102 ( 871-1294 ). These models offer time domain, logic, protocol and frequency analysis in a single instrument. They contain a wide range of upgrade options. 1 Gs/s real time sampling rate 1 Ms memory depth High vertical sensitivity down to 1 mV/div Low noise measurement because of state-of-the-art A/D converter QuickView and QuickMath for fastest access to the most demanding functions Serial bus trigger and hardware accelerated decode: I2C, SPI, UART/RS-232, CAN, LIN Dedicated education mode Built-in MSO capability Built-in pattern generator, digital voltmeter, production tester, function generator, component tester capabilities Note 2 probes are supplied and replacement probes are available separately, HZ154 ( 388-571 ). Supplied with Power cord, switchable probe HZ154 (x2), adapter BNC plug/4mm banana socket HZ20, printed operating manual, CD-ROM with software Hameg HMO series Oscilloscopes

Product Detail

New items

HMO1002, Rohde & Schwarz

Hameg HMO1002 Series Digital Oscilloscope The HMO1002 Series digital oscilloscopes are in the Hameg Value Instruments product range. They feature a high waveform update rate and high vertical sensitivity. The fanless instruments offer a sampling rate of 1 Gs/s and a memory depth of 1 Ms. Models available are the 50 MHz HMO1002 ( 871-1297 ), 70 MHz HMO1072 ( 871-1290 ) and 100 MHz HMO1102 ( 871-1294 ). These models offer time domain, logic, protocol and frequency analysis in a single instrument. They contain a wide range of upgrade options. 1 Gs/s real time sampling rate 1 Ms memory depth High vertical sensitivity down to 1 mV/div Low noise measurement because of state-of-the-art A/D converter QuickView and QuickMath for fastest access to the most demanding functions Serial bus trigger and hardware accelerated decode: I2C, SPI, UART/RS-232, CAN, LIN Dedicated education mode Built-in MSO capability Built-in pattern generator, digital voltmeter, production tester, function generator, component tester capabilities Note 2 probes are supplied and replacement probes are available separately, HZ154 ( 388-571 ). Supplied with Power cord, switchable probe HZ154 (x2), adapter BNC plug/4mm banana socket HZ20, printed operating manual, CD-ROM with software Hameg HMO series Oscilloscopes

Product Detail

New items

HMO Complete 4, Rohde & Schwarz

Hameg Mixed Signal Oscilloscope HMO Complete 4 HMO Complete 4 is a value package comprising 4-channel 500MHz mixed signal oscilloscope HMO3054, 8-channel logic probe HO3516 (x2), serial bus analysis option HOO10, CAN and LIN signal analysis option HOO12 and segmented memory option HOO14. 500 MHz bandwidth 4 channels 4GSa/s real time, low noise flash A /D converter Automatically or manually adjustable memory depth 8 MPts memory, zoom up to 200,000:1 MSO functionality included as standard Vertical sensitivity 1 mV/div, offset control ±0.2…±20 V 6-digit hardware counter Real-time FFT (dBm, dBV, Vrms), up to 64 kPts Automatic search for user-defined events Pass/Fail test based on masks Auto-measurement: maximum 6 parameters including Statistic, Formula Editor, Ratio Cursor Display range 12 div x-Axis, 20 div y-Axis (VirtualScreen) Ethernet/USB dual-interface for remote control Supplied with 8-channel logic probe HO3516 (x2), serial bus analysis option HOO10, CAN and LIN signal analysis option HOO12, segmented memory option HOO14 Hameg HMO series Oscilloscopes

Product Detail

New items

MSO104MXs-B, LeCroy

LeCroy Mixed Signal Oscilloscopes MSO MXs-B These oscilloscopes pack high performance hardware, powerful waveform processing and advanced math, measurement and debug tools into a compact form with a large touch screen display and intuitive user interface. Dimensions 260 (H) x 340 (W) x 152 (D) mm Fast processing of Long Memory and Math Responsive user interface WaveStream TM Fast Viewing Mode WaveScan TM Advanced Search and Find LabNotebook Documentation and Report Generation 10.4in touch screen display LXI compliant 18 digital channels Analog and digital cross pattern triggering Net weight 7.26kg (16lb) Supplied with Manuals; protective cover; 1:10 500MHz 10MΩ passive probes (1 per channel); standard ports - Ethernet, USB2.0 (5), SVGA Video Out, Audio In/Out; anti-virus software (trial version); standard Calibration and Performance Certificate; MS-250 Mixed Signal Oscilloscope Module; 18-channel digital lead set; LeCroy Bus and USB2.0 cables (1.3m); ground extenders (20); flexible ground leads (5); carrying case LeCroy Digital Oscilloscopes

Product Detail

New items

HMO1524, Rohde & Schwarz

Hameg HMO Compact Series The Hameg HMO Compact is a series of compact, powerful and scaleable oscilloscopes. Shallower depth (1400 mm) is combined with the same 1650 mm VGA display as established Hameg models, featuring LED background lighting and extra-wide viewing angle. Frequently-used functions can be addressed at the push of a button, keeping menu depth low and operation simple. Trigger functions can also quickly be selected using the dedicated pushbuttons Source, Mode and Condition. High (real time) sampling rates, memory depths and sensitivity give the HMO Compact models a competitive edge in their price range (HMO models hold maximum sampling rate down to a time base of 1 ms). 2 GSa/s real time, low noise flash A/D converter (Reference Class) 2 MPts memory, memory zoom up to 50,000:1 Serial bus trigger and hardware accelerated decode including List View Automatic search for user defined events Pass/Fail test based on masks Vertical sensitivity 1 mV/div Offset control ±0.2...±20 V (150 MHz and 200 MHz devices only) 12 div x-Axis display range, 20 div y-Axis display range (VirtualScreen) Trigger modes: Slope, Video, Pulsewidth, Logic, Delayed, Event Component tester, 6 digit counter Auto-measurement maximum 6 parameters including Statistic, Formula Editor, Ratiocursor FFT 64 kPts Silence redefined fan 3 x USB for mass storage, printer and remote control Note Probes are supplied with the scope and replacement probes are available separately, HZ154 ( 388-571 ). Supplied with Power cord, switchable probe HZ154 (1 per channel), USB/RS-232 interface HO720, printed operating manual, CD-ROM with software, driver, manual and additional information Hameg HMO series Oscilloscopes

Product Detail

New items

MDO4104B-3, Tektronix

Tektronix Mixed Domain Oscilloscopes MDO4000B Series Tektronix MDO4000 oscilloscopes are the first to come with a built-in spectrum analyzer. This enables capture of time-correlated analog, digital and RF signals for a complete system view of the device. Both the time and the frequency domain can be viewed in a single glance. Standard accessories include: GPIB-to-USB adapter TEK-USB-488 ( 113-143 ); TPP0500B passive probe ( 797-3390 ) for 728-6759 ) for 1 GHz models; P6616 ( 728-6753 ) logic probe. Other recommended probes: TPP0502 ( 734-5016 ) passive probe; TPP0850 ( 734-5010 ) & P5100A ( 734-5013 ) high-voltage passive probes; TAP1500 ( 661-3286 ), TAP2500 ( 232-288 ) & TAP3500 ( 668-7155 ) active probes; TCP0030A ( 781-0807 ) & TCP0150 ( 661-3283 ) current probes; TDP0500 ( 661-3292 ), TDP1000 ( 668-7167 ) & TDP1500 ( 668-7161 ) differential probes; THDP0200 ( 752-7357 ), THDP0100 ( 752-7353 ), TMDP0200 ( 752-7366 ) & P5200A ( 734-5029 ) high-voltage differential probes. Application modules: DPO4AUDIO ( 727-6695 ); DPO4AUTO ( 728-6706 ); DPO4AUTOMAX ( 728-6709 ); DPO4COMP ( 728-6703 ); DPO4EMBD ( 728-6712 ); DPO4ENET ( 728-6734 ); DPO4USB ( 728-6715 ); DPO4PWR ( 728-6719 ); DPO4LMT ( 728-6731 ) & DPO4VID ( 728-6728 ). Time-correlated analog, digital and RF signal acquisitions in a single instrument Wave Inspector® controls provide easy navigation of time-correlated data from time and frequency domains Amplitude, frequency and phase vs. time waveforms derived from RF input Selectable spectrum time to discover and analyze RF changes over time, including changes on a stopped acquisition Mixed-domain Analysis Complex design issues can be resolved quickly and efficiently Dedicated front-panel controls for commonly-performed tasks Automated peak markers identify frequency and amplitude of spectrum peaks Manual markers enable non-peak measurements Trace types include Normal, Average, Max Hold, Min Hold Detection types include +Peak, ...

Product Detail

New items

MSO3034, Tektronix

Tektronix Mixed Signal Oscilloscopes MSO3000 Series & DPO3000 Series MSO/DPO3000 Mixed Signal Oscilloscope Series users can analyze up to 20 analog and digital signals with a single instrument to quickly find and diagnose problems in complex designs. Bandwidths up to 500 MHz and a minimum of 5x oversampling on all channels ensure the performance necessary for many of today's mainstream applications. To capture long windows of signal activity while maintaining fine timing resolution, the MSO/DPO3000 Series offers a deep record length of 5 Mpoints standard on all channels. 2 or 4 analog channel models (DPO) and 2+16 or 4+16 digital channels (MSO) >50,000 wfm/s maximum waveform capture rate Suite of advanced triggers Wave Inspector® controls provide easy navigation and automated search of waveform data 29 automated measurements and FFT analysis for simplified waveform analysis TekVPI® probe interface supports active, differential and current probes for automatic scaling and units 229mm (9in) WVGA widescreen colour display Small footprint, 147mm (5.8in), and light weight, 4 kg (9 lb) USB 2.0 host port on both front and rear panels for quick and easy data storage, printing and connecting a USB keyboard USB 2.0 device port on rear panel for easy connection to a PC or direct printing to a PictBridge®-compatible printer Integrated 10//100 ethernet port for network connection and Video Out port to export the oscilloscope display to a monitor or projector Note Automated serial triggering, decode and search options are available separately for l 2 C, SPI, CAN, LIN, RS-232/422/485/UART and l 2 S/LJ/RJ/TDM. Application support available separately includes Power Analysis and HDTV & Custom Video Analysis Supplied with 1 passive probe per analog channel, front cover, user manual, documentation CD, OpenChoice® desktop software, NI LabView SignalExpress™ Tektron...

Product Detail

New items

HMO1024, Rohde & Schwarz

Hameg HMO Compact Series The Hameg HMO Compact is a series of compact, powerful and scaleable oscilloscopes. Shallower depth (1400 mm) is combined with the same 1650 mm VGA display as established Hameg models, featuring LED background lighting and extra-wide viewing angle. Frequently-used functions can be addressed at the push of a button, keeping menu depth low and operation simple. Trigger functions can also quickly be selected using the dedicated pushbuttons Source, Mode and Condition. High (real time) sampling rates, memory depths and sensitivity give the HMO Compact models a competitive edge in their price range (HMO models hold maximum sampling rate down to a time base of 1 ms). 2 GSa/s real time, low noise flash A/D converter (Reference Class) 2 MPts memory, memory zoom up to 50,000:1 Serial bus trigger and hardware accelerated decode including List View Automatic search for user defined events Pass/Fail test based on masks Vertical sensitivity 1 mV/div Offset control ±0.2...±20 V (150 MHz and 200 MHz devices only) 12 div x-Axis display range, 20 div y-Axis display range (VirtualScreen) Trigger modes: Slope, Video, Pulsewidth, Logic, Delayed, Event Component tester, 6 digit counter Auto-measurement maximum 6 parameters including Statistic, Formula Editor, Ratiocursor FFT 64 kPts Silence redefined fan 3 x USB for mass storage, printer and remote control Note Probes are supplied with the scope and replacement probes are available separately, HZ154 ( 388-571 ). Supplied with Power cord, switchable probe HZ154 (1 per channel), USB/RS-232 interface HO720, printed operating manual, CD-ROM with software, driver, manual and additional information Hameg HMO series Oscilloscopes

Product Detail

New items

MDO4024C+MDO4SA6, Tektronix

Tektronix Mixed Domain Oscilloscopes MDO4000C Series with Spectrum Analyzer Tektronix MDO4000C mixed domain oscilloscopes offer fast acquisition, selectable record length and a full suite of automated measurements to help resolve debug challenges quickly. As well as offering Tektronix MDO4000C base models, RS offers models configured with an integral spectrum analyzer providing 9kHz-3GHz (suffix +MDO4SA3) or 9kHz-6GHz (suffix +MDO4SA6) of spectrum acquisition. The spectrum analyzer offers 4 different traces or views: Normal; Average; Max Hold; Min Hold (detection types include: +Peak; -Peak; Average; Sample). Models with an integral spectrum analyzer provide simultaneous synchronised acquisition of analog, digital and spectral signals - especially useful for incorporating wireless communications (IoT) and EMI troubleshooting. Further options, available separately, include: logic analyzer MDO4MSO ( 908-2846 ), with 16 digital channels and supplied with general purpose logic probe P6616 and accessories; arbitrary function generator MDO4AFG ( 908-2843 ), with 13 predefined waveforms and arbitrary waveform generation. 4 analog channels 20Mpts record length on all channels Integral spectrum analyzer Integral 4-digit digital voltmeter (DVM) and 5-digit frequency counter Standard ports: Ethernet, VGA, USB host (2) and device, AUX OUT, REF IN and AFG output, VESA and Kensington lock interfaces 10.4 in XGA 1024 x 768 display with automatic dimming Dimensions 229 x 439 x 147 mm (9 x 17.3 x 5.8 in) Comparison Table: MDO4000C Series Models Bandwidth Base Model +MDO4SA3 (9kHz-3GHz) +MDO4SA6 (9kHz-6GHz) 200 MHz (MDO4024C) 908-2828 908-2840 908-2865 350 MHz (MDO4034C) 908-2837 908-2859 908-2868 500 MHz (MDO4054C) 908-2830 908-2852 908-2862 1 GHz (MDO4104C) 908-2834 908-2856 908-2871 Note Accessories available separately include GPIB to US...

Product Detail

New items

MDO4054B-6, Tektronix

Tektronix Mixed Domain Oscilloscopes MDO4000B Series Tektronix MDO4000 oscilloscopes are the first to come with a built-in spectrum analyzer. This enables capture of time-correlated analog, digital and RF signals for a complete system view of the device. Both the time and the frequency domain can be viewed in a single glance. Standard accessories include: GPIB-to-USB adapter TEK-USB-488 ( 113-143 ); TPP0500B passive probe ( 797-3390 ) for 728-6759 ) for 1 GHz models; P6616 ( 728-6753 ) logic probe. Other recommended probes: TPP0502 ( 734-5016 ) passive probe; TPP0850 ( 734-5010 ) & P5100A ( 734-5013 ) high-voltage passive probes; TAP1500 ( 661-3286 ), TAP2500 ( 232-288 ) & TAP3500 ( 668-7155 ) active probes; TCP0030A ( 781-0807 ) & TCP0150 ( 661-3283 ) current probes; TDP0500 ( 661-3292 ), TDP1000 ( 668-7167 ) & TDP1500 ( 668-7161 ) differential probes; THDP0200 ( 752-7357 ), THDP0100 ( 752-7353 ), TMDP0200 ( 752-7366 ) & P5200A ( 734-5029 ) high-voltage differential probes. Application modules: DPO4AUDIO ( 727-6695 ); DPO4AUTO ( 728-6706 ); DPO4AUTOMAX ( 728-6709 ); DPO4COMP ( 728-6703 ); DPO4EMBD ( 728-6712 ); DPO4ENET ( 728-6734 ); DPO4USB ( 728-6715 ); DPO4PWR ( 728-6719 ); DPO4LMT ( 728-6731 ) & DPO4VID ( 728-6728 ). Time-correlated analog, digital and RF signal acquisitions in a single instrument Wave Inspector® controls provide easy navigation of time-correlated data from time and frequency domains Amplitude, frequency and phase vs. time waveforms derived from RF input Selectable spectrum time to discover and analyze RF changes over time, including changes on a stopped acquisition Mixed-domain Analysis Complex design issues can be resolved quickly and efficiently Dedicated front-panel controls for commonly-performed tasks Automated peak markers identify frequency and amplitude of spectrum peaks Manual markers enable non-peak measurements Trace types include Normal, Average, Max Hold, Min Hold Detection types include +Peak, ...

Product Detail