What are the shipping charges for products like Multimeter Current Clamp Adapters?

Yes. We keep updating our stock frequently and if a product like Multimeter Current Clamp Adapters is not in stock then we will let you know.

How do I contact the Customer Support Team?

Yes. We keep updating our stock frequently and if a product like Multimeter Current Clamp Adapters is not in stock then we will let you know.

Where are your products like Multimeter Current Clamp Adapters manufactured?

Yes. We keep updating our stock frequently and if a product like Multimeter Current Clamp Adapters is not in stock then we will let you know.

Do you offer any discounts on bulk orders of products like Multimeter Current Clamp Adapters?

Yes. We keep updating our stock frequently and if a product like Multimeter Current Clamp Adapters is not in stock then we will let you know.

How long will it take to receive the order that I placed for Multimeter Current Clamp Adapters?

Yes. We keep updating our stock frequently and if a product like Multimeter Current Clamp Adapters is not in stock then we will let you know.

Are your products Multimeter Current Clamp Adapters in stock?

Yes. We keep updating our stock frequently and if a product like Multimeter Current Clamp Adapters is not in stock then we will let you know.

Multimeter Current Clamp Adapters | Current Clamps & Adapters

New items

PAC26, Chauvin Arnoux

The PAC Series is a range of Hall-effect current clamps for measuring direct and alternating currents. 2 forms are proposed to clamp cables up to 39 mm or 2x25.4 mm in diameter, as well as small busbars. The range comprises PAC1x models and PAC2x models for higher currents. This clamp has 2 sensitivities for better measurement resolution and accuracy, a simplified ZeroDC adjustment system and a deactivatable automatic standby function. Rated current: 100 AAC/150 ADC - 1,000 AAC/1,400 ADC Output signal: DC and AC voltage Output / input ratio: 10 mV / A, 1 mV / A Output via lead and isolated Ø 4 mm male plugs

Product Detail

New items

P01120301, Chauvin Arnoux

C100 Current Clamp for AC current The current clamp is compatible with any instrument (multimeter, wattmeter, recorder, oscilloscope...) for safe measurement of AC currents without shutting down the installation. Current calibre: 0.1 A AC to 1200 A AC Bandwidth: 30 Hz to 10 kHz (-3 dB) Max. jaw opening: 53 mm Output: Safety socket 4 mm Standards IEC 1010-1 and IEC 1010-2-032, 600 V category III pollution degree 2, 300 V category IV pollution degree 2 Supplied with Operating manual.

Product Detail

New items

P01120505, Chauvin Arnoux

Chauvin Arnoux AmpFLEX™ A100 Series Flexible Current Sensors The AmpFLEX™ A100 Series are specially designed for measuring AC currents from 0.5 A to 10 kA, AmpFLEX™ sensors are equipped with outputs via insulated Ø 4 mm banana plugs with 19 mm spacing. They can be connected directly to all multimeters, wattmeters, etc. The length of the sensors in this series, up to 120 cm as standard, means they can clamp large-section cables or several conductors simultaneously. They are ideal for measurement in switch cabinets or subtransmission cabinets. Large measurement range from 0.5 A to 10000 A Excellent linearity, low phase shift 600 V CAT IV or 1,000 V CAT III Flexible and lightweight Models for multimeters, loggers or oscilloscopes

Product Detail

New items

I200, Fluke

Fluke i200 and i200s AC Current Probe and Clamp The i200 is a single range 200 A ac current clamp with current output via banana plugs. The i200 is compatible with all Fluke multimeters or any other current measurement device that accepts banana plugs. The i200s is a dual range 20 A and 200 A ac current clamp with voltage output via a BNC connector. A dual banana to BNC adapter is supplied to allow the i200s to be connected to multimeters with banana inputs. Fluke Current clamps are the ideal tools to extend the current ranges of Fluke tools. Shared features Maximum current: 240 A AC Useable frequency: 40 Hz → 10 KHz Clamp opens to 21 mm Maximum conductor Ø: 20 mm or 20 x 5 mm busbar i200 Measurement Range: 0.5 → 240 A Output Signal: 1 mA/A Safety shrouded banana plugs allow use with most multimeters i200s Measurement Range: 0.1 → 24 A and 0.5 → 240 A Output Signal: 100 mV/A in the 20 A range and 10 mV/A in the 200 A range Supplied with a BNC connector for use with oscilloscopes, ScopeMeters® and testing devices with a BNC input Banana / BNC adapter for use with a multimeter Standards EN61010, CAT III 600 V

Product Detail

New items

P01120508, Chauvin Arnoux

AmpFLEX™ A100 Flexible probe The A100 Flexible current probe has a flexible toroid which connects, via a screened lead, to a small unit containing all the processing electronics and a standard 9 V battery. The unit can be connected directly to any multimeter, wattmeter or recording device. Current calibres: 0.5 A AC to 300 A AC 0.5 A AC to 3000 A AC Output signal: 10 mV AC / A AC (3 V for 300 A) 1 mV AC / A AC (3 V for 3000 A) Bandwidth: 10 Hz to 20 kHz Flexible sensor: Ø 12 mm ±0,5 mm, length 120 cm Output: 2 safety sockets (4 mm) spacing 19 mm Battery: 9 V alkaline battery (NEDA 1604A, IEC 6LR61) Standards IEC 1010-1, 1000 V category III, pollution degree 2 Supplied with Operating manual.

Product Detail

New items

RS_699-0817, ISO-TECH

ICA 39T 1000A ac/dc Adaptor Supplied With: 9V PP3 alkaline battery, carry pouch with belt loop and instructions. 1000A a.c./d.c. measurement Hall effect sensor technology Large jaw size suits cables or bus bars DCA auto zero button Coiled output leads with right angle shrouded 4mm plugs Power on and low battery indicators Complies with EN61010-2-0 32 CAT III 1000V Current ranges 100A a.c./d.c. 1000A a.c./d.c. Output 10mV/A 1mV/A AC accuracy 40-400Hz 100A range: (0-100A) ±(1.9% +2A) (23°C ±5°C) 1000A range; (100-400A) ±(1.9% 7A) 1000A range: (400-1000A) ±(2.9% +5A) DC accuracy 100A range: (0-100A) ±(2.9% +2A) (23°C±5°C) 1000A range: (100-400A) ±(1.9% +7A) 1000A range: (400-1000A) ±(2.9% +5A) Jaw position error ±1% of reading Max conductor size 51mm diameter or 24x 60mm busbar Battery life 66 hours Typical (alkaline) AC/DC Current Adaptors

Product Detail

New items

RS_697-3939, ISO-TECH

ISO-TECH ICA 31,400A ac Current Transducer, ac mV O/P This a.c. current transducer offers high specification performance in a rugged, low cost unit. It can be used to measure up to 400A a.c. when used with the a.c. mV range on a digital multimeter. Non intrusive transducing Coiled output cable (1.5m extended) fitted with 4mm shrouded plugs Ergonomically designed jaw and trigger Designed to meet IEC 1010-1 (safety standards) installation category III 300V installation category II 600V Supplied With: Carry pouch. Output voltage 1mV a.c. per 1A a.c. Operating temperature 0 °C → +45 °C AC Current Adaptors

Product Detail

New items

P01120501, Chauvin Arnoux

Chauvin Arnoux AmpFLEX™ A100 Series Flexible Current Sensors The AmpFLEX™ A100 Series are specially designed for measuring AC currents from 0.5 A to 10 kA, AmpFLEX™ sensors are equipped with outputs via insulated Ø 4 mm banana plugs with 19 mm spacing. They can be connected directly to all multimeters, wattmeters, etc. The length of the sensors in this series, up to 120 cm as standard, means they can clamp large-section cables or several conductors simultaneously. They are ideal for measurement in switch cabinets or subtransmission cabinets. Large measurement range from 0.5 A to 10000 A Excellent linearity, low phase shift 600 V CAT IV or 1,000 V CAT III Flexible and lightweight Models for multimeters, loggers or oscilloscopes

Product Detail

New items

P01120565, Chauvin Arnoux

Chauvin Arnoux MiniFLEX MA100 Series Compact Flexible Current Sensors These compact, lightweight and ergonomic sensors of varying diameters are capable of clamping all types of conductors, whatever their number, dimensions or shape (bars, etc.). Due to their flexibility, they can be used in any location, however cramped. They are ideal for the requirements in both industry and the tertiary sector. Their quick and easy opening/closing system makes them simple to handle even when wearing safety gloves. The MA100 sensors are fitted with two types of outputs: insulated Ø 4 mm banana plugs with 19 mm spacing or BNC output. These compact sensors are easy to set up in domestic or industrial electrical cabinets. Large measurement range from 30 A to 3000 A Excellent linearity, low phase shift 600 V CAT IV or 1,000 V CAT III Flexible and lightweight Models for multimeters, loggers or oscilloscopes

Product Detail

New items

P01120504, Chauvin Arnoux

Chauvin Arnoux AmpFLEX™ A100 Series Flexible Current Sensors The AmpFLEX™ A100 Series are specially designed for measuring AC currents from 0.5 A to 10 kA, AmpFLEX™ sensors are equipped with outputs via insulated Ø 4 mm banana plugs with 19 mm spacing. They can be connected directly to all multimeters, wattmeters, etc. The length of the sensors in this series, up to 120 cm as standard, means they can clamp large-section cables or several conductors simultaneously. They are ideal for measurement in switch cabinets or subtransmission cabinets. Large measurement range from 0.5 A to 10000 A Excellent linearity, low phase shift 600 V CAT IV or 1,000 V CAT III Flexible and lightweight Models for multimeters, loggers or oscilloscopes

Product Detail

New items

PAC16, Chauvin Arnoux

The PAC Series is a range of Hall-effect current clamps for measuring direct and alternating currents. 2 forms are proposed to clamp cables up to 30 mm or 2x24 mm in diameter, as well as small busbars. The range comprises PAC1x models and PAC2x models for higher currents. This clamp has 2 sensitivities for better measurement resolution and accuracy, a simplified ZeroDC adjustment system and a deactivatable automatic standby function. Rated current: 40 AAC/60ADC - 400 AAC/600 ADC Output signal: DC and AC voltage Output / input ratio: 10 mV / A, 1 mV / A Output via lead and isolated Ø 4 mm male plugs

Product Detail

New items

P01120564, Chauvin Arnoux

Chauvin Arnoux MiniFLEX MA100 Series Compact Flexible Current Sensors These compact, lightweight and ergonomic sensors of varying diameters are capable of clamping all types of conductors, whatever their number, dimensions or shape (bars, etc.). Due to their flexibility, they can be used in any location, however cramped. They are ideal for the requirements in both industry and the tertiary sector. Their quick and easy opening/closing system makes them simple to handle even when wearing safety gloves. The MA100 sensors are fitted with two types of outputs: insulated Ø 4 mm banana plugs with 19 mm spacing or BNC output. These compact sensors are easy to set up in domestic or industrial electrical cabinets. Large measurement range from 30 A to 3000 A Excellent linearity, low phase shift 600 V CAT IV or 1,000 V CAT III Flexible and lightweight Models for multimeters, loggers or oscilloscopes

Product Detail