What are the shipping charges for products like Current Clamps?

Yes. We keep updating our stock frequently and if a product like Current Clamps is not in stock then we will let you know.

How do I contact the Customer Support Team?

Yes. We keep updating our stock frequently and if a product like Current Clamps is not in stock then we will let you know.

Where are your products like Current Clamps manufactured?

Yes. We keep updating our stock frequently and if a product like Current Clamps is not in stock then we will let you know.

Do you offer any discounts on bulk orders of products like Current Clamps?

Yes. We keep updating our stock frequently and if a product like Current Clamps is not in stock then we will let you know.

How long will it take to receive the order that I placed for Current Clamps?

Yes. We keep updating our stock frequently and if a product like Current Clamps is not in stock then we will let you know.

Are your products Current Clamps in stock?

Yes. We keep updating our stock frequently and if a product like Current Clamps is not in stock then we will let you know.

Current Clamps | Clamp Meters | Current Clamps & Probes | Multimeters & Accessories

New items

P01120117, Chauvin Arnoux

The PAC Series is a range of Hall-effect current clamps for measuring direct and alternating currents. 2 forms are proposed to clamp cables up to 30 mm or 2x24 mm in diameter, as well as small busbars. The range comprises PAC1x models and PAC2x models for higher currents. When used with an oscilloscope, this isolated current sensor has 2 sensitivities and allows you to view currents with a bandwidth of up to 30 kHz and peak current up to 600 A DC or peak. It is equipped with a simplified ZeroDC adjustment system and a deactivatable automatic standby function. Rated current: 40 AAC/60 ADC - 400 AAC/600 ADC Output signal: DC and AC voltage Output / input ratio: 10 mV / A, 1 mV / A Output via coaxial cable and isolated BNC male plug

Product Detail

New items

ZC20B, Rohde & Schwarz

The Rohde & Schwarz RT-ZC 100MHz current probe precisely measures direct and alternating current without interrupting the power circuit for the measurement. Robust design and easy operation Easy deskewing for simultaneous current and voltage measurements

Product Detail

New items

ZC15B, Rohde & Schwarz

The Rohde & Schwarz RT-ZC 50MHz current probe precisely measures direct and alternating current without interrupting the power circuit for the measurement. Robust design and easy operation Easy deskewing for simultaneous current and voltage measurements

Product Detail

New items

FLUKE I30, Fluke

i30 30A High Resolution, High Bandwidth Current Probe The i30 may be used in conjunction with multimeters, recorders and other suitable recording instruments for accurate non-intrusive ac & dc current measurement.,Applications include: inverters, switch mode power supplies, industrial controllers, automotive leakage currents and other applications requiring accurate isolated current measurement. Hall effect sensing of a.c. and d.c. current Power LED warns of low battery by flashing Zero adjust knob to accommodate offsets 1.5m flying lead terminated with 4mm shrouded plugs Designed to meet EN61010-1, EN61010-2-032 installation CAT III 300V Withstands overloads to 500A Current range 0 to ±30A peak Overall d.c. accuracy ±1% of reading ±2mA Resolution ±1mA Output sensitivity 100mV/A Frequency response (-0.5dB) d.c. to 20kHz Output (load) impedance >100kΩ and ≤100pF Max. conductor size 19mm dia. Battery life 30 hours typical Supplied with Alkaline PP3 battery and operators manual. Warning Use of the probe on uninsulated conductors is limited to 300V ac rms or dc and frequencies below 1 kHz.

Product Detail

New items

i1010, Fluke

Fluke Current Probes Rugged current clamp adaptor suitable for use with multimeters to give non intrusive measurement of d.c. and a.c. current. Integral 1.2m 4mm shrouded plug lead. Jaws accept conductor size of 1 x 30mm or 2 x 25mm dia. d.c. current zero control for nulling out jaw/sensor offset Superior noise immunity allows measurement in electrically noisy environments, such as adjustable speed drive line-side and load currents Shielded, heat-resistant silicon rubber cable connects clamp to digital multimeter Battery check mode Compatible with meter input impedance ≥1MΩ Conforms to IEC 1010-1 Cat III 600V Supplied With: 9V PP3 alkaline battery and operators manual.

Product Detail

New items

P01120315, Chauvin Arnoux

The Chauvin Arnoux "C100" series is a range of thirteen transformer clamps with all the advantages of old "C30" series clamps whilst incorporating considerable improvements, particularly in the fi eld of safety and ergonomics. A "C100" series clamp is compatible with any instrument (multimeter, wattmeter, recorder, oscilloscope...) for safe measurement of AC currents without shutting down the installation. 1,000 A measurement, excellent metrology, high accuracy, high level of linearity, symmetrical coil windings for minimum phase shift, pendular adjusting system for magnetic elements, maximum conductor diameter Ø 52 mm and also some models with metal core specially made for wattmeter use Innovative design: excellent ergonomics, handle with fi nger grips, assisted opening system for jaws (patented system), IEC 1010 600 V cat. III safety (industry and services), antislip protection, conductor antipinching system,...

Product Detail

New items

P01120631, Chauvin Arnoux

The Chauvin Arnoux AmpFlex series A110 single-phase sensors which is 80 cm long, that convert alternating currents ranging from 3 to 3000 A into proportional AC voltages. It has clamping diameter of 250 mm. Excellent linearity and low phase shift Long battery life Deactivatable automatic standby function Power supply by batteries and standard external adapter

Product Detail

New items

P01120661, Chauvin Arnoux

The Chauvin Arnoux Ampflex Miniflex MA110 single-phase sensors which is 250 mm long, that convert alternating currents ranging from 3 to 3000 A into proportional AC voltages. It has clamping diameter of 70 mm. Excellent linearity and low phase shift Long battery life Deactivatable automatic standby function Power supply by batteries and standard external adapter

Product Detail

New items

A1587, Sefram

The Sefram Flexible Current Clamp. A 1587 is a single phase flexible current sensor. It consists of one current coil utilizing rogowski measuring principle. A 1587 is powered either by mains or rechargeable batteries. IP64/40 degree of protection

Product Detail

New items

P01120027, Chauvin Arnoux

The Chauvin Arnoux E Series current clamps can be used to measure alternating and direct currents by means of Hall-effect technology. Their unique long, narrow shape facilitates measurement in confined spaces where access is difficult or when there are a large number of electrical cables and conductors present. The clamps in the E Series are all equipped with an automatic DC Zero system and a deactivatable standby mode. They can be powered by a battery or a standard 5 VDC power pack (option) via their Micro USB connector. They offer two different sensitivities and output an alternating and direct voltage signal (mVac+dc) which is a faithful image, in terms of the waveform and amplitude, of the current measured. Measurement range 100 mA 100 A peak Bandwidth 100 kHz (-3 dB) Clamping diameter 11.8 mm Power supply internal 9 V battery External +5 VDC via female μUSB type B

Product Detail

New items

1146B, Keysight Technologies

Keysight Clamp-on Current Probe 1146B The Keysight 1146B ac/dc clamp-on current probe provides accurate display and measurement of currents from 100mA to 100Arms, dc to 100kHz, without breaking into the circuit. A battery level indicator and overload indicator help ensure proper readings. The probe connects directly to a scope through a 2m coaxial cable with an insulated BNC. The 1146B is recomended for use with Keysight scopes: MSO/DSO 2000X; MSO/DSO 3000X; MSO/DSO 4000X; MSO/DSO 6000X; DSO 5000A (100MHz); DSO 5000A (300 - 500MHz); MSO/DSO 6000A (100MHz); MSO/DSO 6000A (300MHz - 1GHz); MSO/DSO 7000A/B (100MHz - 1GHz).

Product Detail

New items

TA300, Pico Technology

Pico 40A AC/DC Current Probe, D9 Connector The TA300 is a 100 kHz bandwidth, single-range 40 A AC or DC current probe using the D9 connector specific to the PicoScope 4444 differential oscilloscope. On connection with the scope, the probe is instantly sensed and the vertical range automatically set up in PicoScope software. The probe is also powered by the scope through the D9 connector. Note: When using the PicoScope 4444 with USB power (no AC adaptor connected), sensor power is limited to a maximum of 3 x TA300 probes at once. Being several instruments in one small unit, PC-based oscilloscopes are lighter and more portable than traditional test equipment. A field engineer can thereby carry a complete electronics lab loaded onto a notebook computer. PC Based Instruments Compact and portable Can provide a large and detailed colour display on your PC monitor Simultaneous views of scope, spectrum analyser and meter modes Analogue intensity and digital colour display modes Signal storage is limited only by the PC's memory

Product Detail