Clearance Gauges

Plastigauges RS Pro plasticgauge provides a simple effective method for the measurement of clearance between fitted surfaces. Ideal for use with mains bearings, pipe flanges, head gasket, high spots, housings, injection moulding tools or where a feeler gauge cannot be inserted. Can highlight, clearance, lobing, ovality on shafts Volumetric measurement takes surface roughness into account Calibration card supplied Clearance measurement 0.001in. to 0.020in. (0.025 to 0.5mm) can be taken. Non corrosive and oil soluble Selection Guide Type Measurement Range inch mm A 0.001-0.007 0.025-0.175 B 0.004-0.010 0.1-0.25 C 0.008-0.020 0.2-0.5 Note Care must be taken when measuring gaps below 0.00025in. (0.06mm) to achieve results. Supplied with Plastigauge is supplied in packs to suit clearance ranges. Care should be taken to select the correct range type.

Plastigauges RS Pro plasticgauge provides a simple effective method for the measurement of clearance between fitted surfaces. Ideal for use with mains bearings, pipe flanges, head gasket, high spots, housings, injection moulding tools or where a feeler gauge cannot be inserted. Can highlight, clearance, lobing, ovality on shafts Volumetric measurement takes surface roughness into account Calibration card supplied Clearance measurement 0.001in. to 0.020in. (0.025 to 0.5mm) can be taken. Non corrosive and oil soluble Selection Guide Type Measurement Range inch mm A 0.001-0.007 0.025-0.175 B 0.004-0.010 0.1-0.25 C 0.008-0.020 0.2-0.5 Note Care must be taken when measuring gaps below 0.00025in. (0.06mm) to achieve results. Supplied with Plastigauge is supplied in packs to suit clearance ranges. Care should be taken to select the correct range type.

Plastigauges RS Pro plasticgauge provides a simple effective method for the measurement of clearance between fitted surfaces. Ideal for use with mains bearings, pipe flanges, head gasket, high spots, housings, injection moulding tools or where a feeler gauge cannot be inserted. Can highlight, clearance, lobing, ovality on shafts Volumetric measurement takes surface roughness into account Calibration card supplied Clearance measurement 0.001in. to 0.020in. (0.025 to 0.5mm) can be taken. Non corrosive and oil soluble

RS PRO Clearance Gauge, 0.025 mm → 0.175 mm This clearance gauge provides an easy but accurate way to measure the clearance space between hidden surfaces. It's particularly useful for measuring the clearance in split bearings or in situations where feeler gauges can't be inserted. Also known as plastigauge, this strip of soft material can be sandwiched between the bearing surface on a shaft and the bearing shell. When you tighten the bearing cap, the plastigauge is flattened and you can then figure out the clearance by comparing the flattened plastigauge to the supplied calibration card. This clearance gauge is used to measure distances ranging from 0.025 mm to 0.175 mm. These gauges from the RS PRO range have been thoroughly tested for reliability. They're ideal for applications such as measuring the clearance in pipe-flanges, head gaskets, injection moulding tools and cylinder heads. Features and Benefits • Clearance gauge • Minimum measurement of 0.025 mm • Maximum measurement of 0.175 mm • Calibration card supplied • Non-corrosive • Oil-soluble • To be certain of accuracy, you should take particular care when measuring clearances below 0.06 mm RS PRO RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.

Plastigauges RS Pro plasticgauge provides a simple effective method for the measurement of clearance between fitted surfaces. Ideal for use with mains bearings, pipe flanges, head gasket, high spots, housings, injection moulding tools or where a feeler gauge cannot be inserted. Can highlight, clearance, lobing, ovality on shafts Volumetric measurement takes surface roughness into account Calibration card supplied Clearance measurement 0.001in. to 0.020in. (0.025 to 0.5mm) can be taken. Non corrosive and oil soluble Selection Guide Type Measurement Range inch mm A 0.001-0.007 0.025-0.175 B 0.004-0.010 0.1-0.25 C 0.008-0.020 0.2-0.5 Note Care must be taken when measuring gaps below 0.00025in. (0.06mm) to achieve results. Supplied with Plastigauge is supplied in packs to suit clearance ranges. Care should be taken to select the correct range type.

Plastigauges RS Pro plasticgauge provides a simple effective method for the measurement of clearance between fitted surfaces. Ideal for use with mains bearings, pipe flanges, head gasket, high spots, housings, injection moulding tools or where a feeler gauge cannot be inserted. Can highlight, clearance, lobing, ovality on shafts Volumetric measurement takes surface roughness into account Calibration card supplied Clearance measurement 0.001in. to 0.020in. (0.025 to 0.5mm) can be taken. Non corrosive and oil soluble