Microwave & Emission Detectors

TM-91 Radiation Meter, SEEIT The SEEIT Radiation Meter is intended for Gamma, Beta and X-Ray radiation measurements. The monitor is suitable for different environments and is suitable in medical, nuclear, metal and mining industries. The LCD screen will display the measurements on the monitor it also features a low battery indicator and has alarm settings. This device is highly sensitive and useful in home and Industrial environments. Measurement: Gamma, Beta and X-Ray Units: MicroSiever/h (μS/h) or MicroRem/h (μRem/h) Range: 0.01μSv/h to 19.99μSv/h or 1μRem/h to 1999μRem/h Accuracy 15% with resolution of 0.01uS/h or 1uRem/h Display: 3.5 digits Alarm setting: adjustable 0,50μS/h or 50μRem/h Auto power off: 30mn (adjustable) Operation temperature: 0°C to +50°C Note Items included: Tester, Alkaline battery 9V (6F22), carry case and user manual in French and English

Low Frequency EMF Detector This detector is ideal for measuring magnetic fields generated by high voltage power lines, local power lines, workplace and household wiring and common electrical appliances (including computer screens/monitors).10 coloured LED lights denote calibrated levels of measurement, which are further grouped into 3 ranges of exposure from green to red. Simply switch on the instruments and note its reading.,ELF monitors are tested and calibrated to international standards and then sealed at the factory, requiring no further adjustment. Frequency Range 20-1200 Hz Frequency Response ± 1.5dB, 30-800Hz Field Strength Measurement 0-2400 nanoTesla (24 milliGauss) Sensitivity 0.5 milliGauss Sensor Single Pickup Coil (loop 30cm 2 ) Battery PP3 Alkaline (not supplied)

Fluke 481 Radiation Survey Meter The Fluke 481 Radiation Survey Meter is a portable and practical means for identifying irradiated goods equipment, surfaces or environments in industrial settings, for ensuring worker safety Detects skin-dose (beta particle) and deep-dose (gamma) and X-ray radiation Requires no adjustments; simple two button operation Delivers quickly read, correct value through autoranging capability Easily visible inside truck trailers and other low-light conditions with automated backlight Works reliably indoors or outdoors thanks to sealed case Delivers more than one week of continuous operation from two 9-volt alkaline batteries Proven in use by state and local governmental emergency response professionals, state inspectors, HAZMAT teams and nuclear power workers Measures both dose and dose-rate Useful for contamination-detection, general radiation area surveys, radiation-level monitoring, and hazardous materials assessment Ruggedized Fluke design Radiation detected Beta > 100 keV Gamma > 7 keV Operating ranges, response time 0 mR/h to 5 mR/h (8 sec) 0 mR/h to 50 mR/h (2.5 sec) 0 mR/h to 500 mR/h (2 sec) 0 R/h to 5 R/h (2 sec) 0 R/h to 50 R/h (2 sec) Accuracy Within 10 % of readings between 10 % and 100 % of full scale indication on any range, exclusive of energy response Detector Chamber (cc volume air ionization) 349 cc Chamber wall (phenolic) 246 mg/cm2 Chamber window (mylar) 6.6 mg/cm2 Beta slide 440 mg/cm2 Environmental Temperature range -4 °F to 122 °F Relative humidity 0 % to 100 % (at 140 °F) Geotropism Dimensions (W x D x H) 10 cm x 20 cm x 15 cm Weight 1.11 kg

Microwave Leakage Detector Martindale TEK500 An easy to use, low cost detector for commercial and domestic microwave ovens. Tests to BS 5175 and complies with NRPB-GS11 on permitted exposure levels. Includes self test which simulates a real microwave input, to ensure the unit is working correctly Audible warning device Measuring beaker and thermometer allows measurement of the microwave power output Requires 9V PP3 battery (stock no. 394-9059 ) Dimensions (mm): 150 x 64 x 30 (L x W x D) Power Density Range 0-10 mW/cm 2 Accuracy 1dB for plane wave of all polarisations Cardinal Points 1, 5, 10 mW/cm² Response of Step Input 2 s (approx.) Overload Capacity 50 mW/cm² Spacer 50 mm cone Supplied with Measuring beaker, carrying case, thermometer and full instructions for testing microwave appliances to BS5175:1976. Standards BS5175:1976