What are the shipping charges for products like Voltage Indicators?

Yes. We keep updating our stock frequently and if a product like Voltage Indicators is not in stock then we will let you know.

How do I contact the Customer Support Team?

Yes. We keep updating our stock frequently and if a product like Voltage Indicators is not in stock then we will let you know.

Where are your products like Voltage Indicators manufactured?

Yes. We keep updating our stock frequently and if a product like Voltage Indicators is not in stock then we will let you know.

Do you offer any discounts on bulk orders of products like Voltage Indicators?

Yes. We keep updating our stock frequently and if a product like Voltage Indicators is not in stock then we will let you know.

How long will it take to receive the order that I placed for Voltage Indicators?

Yes. We keep updating our stock frequently and if a product like Voltage Indicators is not in stock then we will let you know.

Are your products Voltage Indicators in stock?

Yes. We keep updating our stock frequently and if a product like Voltage Indicators is not in stock then we will let you know.

Voltage Indicators | Voltage Tester | Electrical Tester

New items

RS_124-1961, RS PRO

RS PRO IVT-10 LED Voltage Indicator Features and Benefits 2 pole test with LED display indicators 12 V to 750 V ac/dc Voltage indication range Integrated single pole test for phase detection Rotary field indication Continuity Beeper Ultra bright white LED torch Screw on tip adapters to select 2 mm or 4 mm diameter probe tips Self-test IP65-water-jet and dust tight protection for outdoor use Compact design with convenient battery door Battery life: 200 hours Drop proof – up to 1m Auto power on/off Power requirement: 2 x 1.5 V IEC LR03 or AAA size Dimensions: 68 mm x 239 mm x 29 mm Weight: 230g (including batteries) IP2X test probes (retractable probe tip shroud) Specifications: Voltage Test - Range 12V-750 V ac/dc Continuity Test - Threshold - <200KΩ Typical Applications: Electricians DIY enthusiasts Why RS PRO?

Product Detail

New items

RS_124-1962, RS PRO

RS PRO IVT-20 Voltage Tester LCD Features and Benefits: 2 pole test with 2000 Count digital display indicators Auto Sensing of ACV, DCV, Ω, Continuity and Diode Integrated single pole test for phase detection Rotary field indication Dual display for ACV measuring with frequency AC-DC 750 V capability 1 K Ohms Resistance range 1 H Hz Frequency counter Continuity Beeper Ultra bright white LED torch Screw on tip adapters to select 2 mm or 4 mm diameter probe tips Self-test IP65-water-jet and dust tight protection for outdoor use Compact design with convenient battery door Power requirement: 2 x 1.5 V IEC LR03 or AAA size Dimensions: 68 mm x 239 mm x 29 mm Weight: 240g (including batterries) P2X test probes (retractable probe tip shroud) Specifications: Voltage Test - Range 12V-750V ac/dc Resistance Test - Range 0-2KΩ Frequency Test - Range 1Hz-999Hz Continuity Test - Threshold <200Ω Diode Test Range - 0.3-0.9V Typical Applications: Electricians DIY enthusiasts FAQs Are calibration versions of the IVT-20 LCD Voltage Tester available? Why RS PRO?

Product Detail

New items

RS_124-2019, RS PRO

RS PRO IVT-20 Voltage Tester LCD Features and Benefits: 2 pole test with 2000 Count digital display indicators Auto Sensing of ACV, DCV, Ω, Continuity and Diode Integrated single pole test for phase detection Rotary field indication Dual display for ACV measuring with frequency AC-DC 750 V capability 1 K Ohms Resistance range 1 H Hz Frequency counter Continuity Beeper Ultra bright white LED torch Screw on tip adapters to select 2 mm or 4 mm diameter probe tips Self-test IP65-water-jet and dust tight protection for outdoor use Compact design with convenient battery door Power requirement: 2 x 1.5 V IEC LR03 or AAA size Dimensions: 68 mm x 239 mm x 29 mm Weight: 240g (including batterries) P2X test probes (retractable probe tip shroud) Specifications: Voltage Test - Range 12V-750V ac/dc Resistance Test - Range 0-2KΩ Frequency Test - Range 1Hz-999Hz Continuity Test - Threshold <200Ω Diode Test Range - 0.3-0.9V Typical Applications: Electricians DIY enthusiasts FAQs Are calibration versions of the IVT-20 LCD Voltage Tester available? Why RS PRO?

Product Detail

New items

RS_124-2015, RS PRO

RS PRO IVT-10 LED Voltage Indicator Features and Benefits 2 pole test with LED display indicators 12 V to 750 V ac/dc Voltage indication range Integrated single pole test for phase detection Rotary field indication Continuity Beeper Ultra bright white LED torch Screw on tip adapters to select 2 mm or 4 mm diameter probe tips Self-test IP65-water-jet and dust tight protection for outdoor use Compact design with convenient battery door Battery life: 200 hours Drop proof – up to 1m Auto power on/off Power requirement: 2 x 1.5 V IEC LR03 or AAA size Dimensions: 68 mm x 239 mm x 29 mm Weight: 230g (including batteries) IP2X test probes (retractable probe tip shroud) Specifications: Voltage Test - Range 12V-750 V ac/dc Continuity Test - Threshold - <200KΩ Typical Applications: Electricians DIY enthusiasts Why RS PRO?

Product Detail

New items

CA742, Chauvin Arnoux

Chauvin Arnoux Low-voltage Two-pole Voltage Absence Tester CA742 Chauvin Arnoux CA742 is a voltage detector with indicator lights. It is an instrument of choice for electricians checking that no voltage is present before working on an electrical installation connected to the network. It complies with IEC 61243-3 Edition 2 and can be used to work on any indoor or outdoor 600 V CAT IV installation. To fulfil the requirements of the standards and legislation in different countries, RS offers different versions - without IP2X accessories ( 914-0021 ) and with IP2X accessories ( 914-0025 ). The CA742 is equipped with a redundant safety system in the event of power supply faults. An 'ELV LED' flashes whenever the voltage exceeds 50 V AC / 120 V DC. The full Autotest of the CA742 checks the electrical circuits, the power supply, the display and the condition of the measurement leads. Features and Benefits Full integrated autotest Voltage testing up to 690 V AC (16 2/3 Hz - 800 Hz) / 750 V DC Single-pole phase test Phase sequence testing up to 400 Hz Input impedance >300 kΩ Continuity testing Removable test probe and cable Dimensions 163 x 64 x 40 mm IP65 protection rating Weight 210 g Note The voltages indicated on the CA742 are nominal voltages - users must ensure the device will be used on networks at standardised voltages. Standards EN 61243-3 Ed.2009, EN 61243-3 Ed.2010, DIN VDE 0682-401 Ed.2011 Supplied with Red test probe 2 mm diameter, black lead terminated by test probe 2mm diameter (CA742) or 90 cm black lead and 25 cm red lead terminated by an IP2X probe tip 4 mm diameter (CA742 IP2X) plus (both models) strap, battery (x2), user manual (in 5 languages), verification certificate Voltage Level Indicators A range of voltage testers each available in versions suitable for electronic or electrical applications.

Product Detail

New items

CA742 IP2X, Chauvin Arnoux

Chauvin Arnoux Low-voltage Two-pole Voltage Absence Tester CA742 Chauvin Arnoux CA742 is a voltage detector with indicator lights. It is an instrument of choice for electricians checking that no voltage is present before working on an electrical installation connected to the network. It complies with IEC 61243-3 Edition 2 and can be used to work on any indoor or outdoor 600 V CAT IV installation. To fulfil the requirements of the standards and legislation in different countries, RS offers different versions - without IP2X accessories ( 914-0021 ) and with IP2X accessories ( 914-0025 ). The CA742 is equipped with a redundant safety system in the event of power supply faults. An 'ELV LED' flashes whenever the voltage exceeds 50 V AC / 120 V DC. The full Autotest of the CA742 checks the electrical circuits, the power supply, the display and the condition of the measurement leads. Features and Benefits Full integrated autotest Voltage testing up to 690 V AC (16 2/3 Hz - 800 Hz) / 750 V DC Single-pole phase test Phase sequence testing up to 400 Hz Input impedance >300 kΩ Continuity testing Removable test probe and cable Dimensions 163 x 64 x 40 mm IP65 protection rating Weight 210 g Note The voltages indicated on the CA742 are nominal voltages - users must ensure the device will be used on networks at standardised voltages. Standards EN 61243-3 Ed.2009, EN 61243-3 Ed.2010, DIN VDE 0682-401 Ed.2011 Supplied with Red test probe 2 mm diameter, black lead terminated by test probe 2mm diameter (CA742) or 90 cm black lead and 25 cm red lead terminated by an IP2X probe tip 4 mm diameter (CA742 IP2X) plus (both models) strap, battery (x2), user manual (in 5 languages), verification certificate Voltage Level Indicators A range of voltage testers each available in versions suitable for electronic or electrical applications.

Product Detail

New items

P01191762A, Chauvin Arnoux

Chauvin Arnoux Low-voltage Two-pole Voltage Absence Tester CA762 Chauvin Arnoux CA762 is a voltage detector with indicator lights. It is an instrument of choice for electricians checking that no voltage is present before working on an electrical installation connected to the network. It complies with IEC 61243-3 Edition 2 and can be used to work on any indoor or outdoor 600 V CAT IV installation. To fulfil the requirements of the standards and legislation in different countries, RS offers different versions - without IP2X accessories ( 914-0034 ) and with IP2X accessories ( 914-0037 ). The CA762 is equipped with a redundant safety system in the event of power supply faults. An 'ELV LED' flashes whenever the voltage exceeds 50 V AC / 120 V DC. The full Autotest of the CA762 checks the electrical circuits, the power supply, the display and the condition of the measurement leads. Full integrated autotest Voltage testing up to 690 V AC (16 2/3 Hz - 800 Hz) / 750 V DC Single-pole phase test Phase sequence testing up to 400 Hz Input impedance >400 kΩ Continuity testing Extended continuity test 2 kΩ, 60 kΩ, 300 kΩ Phase rotation, 2-wire method Removable test probe and cable Dimensions 163 x 64 x 40 mm IP65 protection rating Weight 210 g Note The voltages indicated on the CA762 are nominal voltages - users must ensure the device will be used on networks at standardised voltages. Supplied with Red test probe 2 mm diameter, black lead terminated by test probe 2mm diameter (CA742) or 90 cm black lead and 25 cm red lead terminated by an IP2X probe tip 4 mm diameter (CA742 IP2X) plus (both models) strap, battery (x2), user manual (in 5 languages), verification certificate Voltage Level Indicators A range of voltage testers each available in versions suitable for electronic or electrical applications.

Product Detail

New items

CA762, Chauvin Arnoux

Chauvin Arnoux Low-voltage Two-pole Voltage Absence Tester CA762 Chauvin Arnoux CA762 is a voltage detector with indicator lights. It is an instrument of choice for electricians checking that no voltage is present before working on an electrical installation connected to the network. It complies with IEC 61243-3 Edition 2 and can be used to work on any indoor or outdoor 600 V CAT IV installation. To fulfil the requirements of the standards and legislation in different countries, RS offers different versions - without IP2X accessories ( 914-0034 ) and with IP2X accessories ( 914-0037 ). The CA762 is equipped with a redundant safety system in the event of power supply faults. An 'ELV LED' flashes whenever the voltage exceeds 50 V AC / 120 V DC. The full Autotest of the CA762 checks the electrical circuits, the power supply, the display and the condition of the measurement leads. Full integrated autotest Voltage testing up to 690 V AC (16 2/3 Hz - 800 Hz) / 750 V DC Single-pole phase test Phase sequence testing up to 400 Hz Input impedance >400 kΩ Continuity testing Extended continuity test 2 kΩ, 60 kΩ, 300 kΩ Phase rotation, 2-wire method Removable test probe and cable Dimensions 163 x 64 x 40 mm IP65 protection rating Weight 210 g Note The voltages indicated on the CA762 are nominal voltages - users must ensure the device will be used on networks at standardised voltages. Supplied with Red test probe 2 mm diameter, black lead terminated by test probe 2mm diameter (CA742) or 90 cm black lead and 25 cm red lead terminated by an IP2X probe tip 4 mm diameter (CA742 IP2X) plus (both models) strap, battery (x2), user manual (in 5 languages), verification certificate Voltage Level Indicators A range of voltage testers each available in versions suitable for electronic or electrica...

Product Detail

New items

CA762 IP2X, Chauvin Arnoux

Chauvin Arnoux Low-voltage Two-pole Voltage Absence Tester CA762 Chauvin Arnoux CA762 is a voltage detector with indicator lights. It is an instrument of choice for electricians checking that no voltage is present before working on an electrical installation connected to the network. It complies with IEC 61243-3 Edition 2 and can be used to work on any indoor or outdoor 600 V CAT IV installation. To fulfil the requirements of the standards and legislation in different countries, RS offers different versions - without IP2X accessories ( 914-0034 ) and with IP2X accessories ( 914-0037 ). The CA762 is equipped with a redundant safety system in the event of power supply faults. An 'ELV LED' flashes whenever the voltage exceeds 50 V AC / 120 V DC. The full Autotest of the CA762 checks the electrical circuits, the power supply, the display and the condition of the measurement leads. Full integrated autotest Voltage testing up to 690 V AC (16 2/3 Hz - 800 Hz) / 750 V DC Single-pole phase test Phase sequence testing up to 400 Hz Input impedance >400 kΩ Continuity testing Extended continuity test 2 kΩ, 60 kΩ, 300 kΩ Phase rotation, 2-wire method Removable test probe and cable Dimensions 163 x 64 x 40 mm IP65 protection rating Weight 210 g Note The voltages indicated on the CA762 are nominal voltages - users must ensure the device will be used on networks at standardised voltages. Supplied with Red test probe 2 mm diameter, black lead terminated by test probe 2mm diameter (CA742) or 90 cm black lead and 25 cm red lead terminated by an IP2X probe tip 4 mm diameter (CA742 IP2X) plus (both models) strap, battery (x2), user manual (in 5 languages), verification certificate Voltage Level Indicators A range of voltage testers each available in versions suitable for electronic or electrical applications.

Product Detail

New items

2052-D, Amprobe

2052-D VOLTfix plus non-contact voltage tester VOLTfix plus non-contact voltage tester with optical and acoustic detection of AC voltages. Fast, exact location of line breaks in cables lying open Reliable, automatic self-test at start-up of the equipment by visual standby display Compact, handy design, which fits in any pocket Complies with CAT III 600 V Supplied with 2 x 1.5 V (LR03) batteries, instructions.

Product Detail

New items

CA771 DDT/VAT, Chauvin Arnoux

CA771 Voltage Absence Tester (VAT) CAT IV 1000V The CA771 is a Voltage Absence Tester with LEDs for voltages up to 1000 VAC/1400 VDC with audible extended continuity and phase rotation testing. The CA771 also offers trip testing of RCDs rated 30 mA (or less), as well as lighting of the test probe/point of measurement. 1000 VAC / 1400 VDC Designed for extreme temperature conditions -30°C to +60°C Single-pole phase test Extended continuity test with audible and visual indication. Two-pole phase sequence test with 2-wire method RCD trip testing and Detection of stray voltages Lighting of point of measurement IP65 Standards IEC 61243-3:2009, EN 61243-3:2010, IEC 61010 1,000 V CAT IV Supplied with Voltage absence tester, User's guide in 5 languages, 2 x 1.5 V LR03/AAA batteries, 1 set of removable test probes Ø 2 mm with crystal safety cover, 1 probe-tip protection and 1 Velcro strap. Voltage Level Indicators A range of voltage testers each available in versions suitable for electronic or electrical applications.

Product Detail

New items

P01191742A, Chauvin Arnoux

Chauvin Arnoux Low-voltage Two-pole Voltage Absence Tester CA742 Chauvin Arnoux CA742 is a voltage detector with indicator lights. It is an instrument of choice for electricians checking that no voltage is present before working on an electrical installation connected to the network. It complies with IEC 61243-3 Edition 2 and can be used to work on any indoor or outdoor 600 V CAT IV installation. To fulfil the requirements of the standards and legislation in different countries, RS offers different versions - without IP2X accessories ( 914-0021 ) and with IP2X accessories ( 914-0025 ). The CA742 is equipped with a redundant safety system in the event of power supply faults. An 'ELV LED' flashes whenever the voltage exceeds 50 V AC / 120 V DC. The full Autotest of the CA742 checks the electrical circuits, the power supply, the display and the condition of the measurement leads. Features and Benefits Full integrated autotest Voltage testing up to 690 V AC (16 2/3 Hz - 800 Hz) / 750 V DC Single-pole phase test Phase sequence testing up to 400 Hz Input impedance >300 kΩ Continuity testing Removable test probe and cable Dimensions 163 x 64 x 40 mm IP65 protection rating Weight 210 g Note The voltages indicated on the CA742 are nominal voltages - users must ensure the device will be used on networks at standardised voltages. Standards EN 61243-3 Ed.2009, EN 61243-3 Ed.2010, DIN VDE 0682-401 Ed.2011 Supplied with Red test probe 2 mm diameter, black lead terminated by test probe 2mm diameter (CA742) or 90 cm black lead and 25 cm red lead terminated by an IP2X probe tip 4 mm diameter (CA742 IP2X) plus (both models) strap, battery (x2), user manual (in 5 languages), verification certificate Voltage Level Indicators A range of voltage testers each available in versions suitable for electro...

Product Detail