RCD Testers

C.A 6030 differential tester The C.A 6030 differential tester combines optimum ease of use with real metrological performances for testing compliance with the NFC 15-100 standard. Safe and direct connection to mains socket on the equipment being tested. Reliable measurements thanks to automatic permutation of L and N inputs if the conductors are reversed at the socket connection. Automatic measurement of the equipment's voltage and frequency. Differential tests: standard, selective, A or ac. 5 fixed ranges: 10 / 30 / 100 / 300 / 500 mA + an adjustable range from 6 → 650 mA. Trip test / measurement of time (pulse or ramp mode) and exact trip current (ramp mode). Earth measurements when the equipment is POWERED ON: earth loop and 1P earth. Measurement of current & leakage current using the probe (optional). Phase rotation direction test (2- or 3-wire). Cat III 600 V. Programmable alarms, date/time recording of results, direct printing of measurement readings using serial printer and data transfer to PC (transfer software included as standard). Large backlit display / hands-free case. Battery-powered; battery life equivalent to 2000 measurements. Dimensions: 270 x 250 x 180 mm. Weight: 900 g. Comes in shoulder bag with accessory case containing: 1 mains lead, 1 3-wire lead, 3 test probes / 3 crocodile clips, 1 user manual in 5 languages, data transfer application software, 1 communication lead.

IRT2310 RCD Tester with DC test 18 RCD test current ranges Tests RCDs and DC sensitive breakers 1/2 x, 1x, and 5x device ratings Constant current control circuitry permits accurate readings even when mains fluctuates by ±10% at 240V 0° and 180° phase selection LED status lights for easy reading in dimly lit areas LED indication of correct wiring status Excessive overvoltage warning with lockout Tripping time resolution 1ms Complies with safety standard EN610101-1 CAT III 300V Test current settings 10, 20, 30, 100, 300,500 mA Test current Factors 1/2X, 1X, 5X, DC Fault Trip Current Duration 2000ms (1/2X, 1X, DC) 50ms (5X) Rated system voltage 230V +10% , -15%; 50Hz Trip time accuracy ±(0.6% + 4 digits) Safety Rating EN61010-1 CAT III 300V Supplied with carrying strap, mains leads for BS1363 mains socket outlets, test lead pouch and instruction booklet. ISO-TECH RCD Tester

KMP7021 Digital RCD Tester The RCD tester is simple to use device designed to check for correct operation of RCD devices. It features three levels of trip currents with Ramp Test for complete range of testing applications. Three levels of trip currents (X1/2, X1, X5) for complete range of testing applications Ramp test 3-LED proper connection indicator Phase switch selection 0° and 180° for positive and negative semi-cycle testing Large display Safety CAT III 300V Supplied with 3-Wires mains test cord, test lead set with leads/probes/alligator clips, users manual, strap and carrying case.

RCD Tester Martindale RC2000 This RCD tester is fast and easy to use, with a wide application, and meets wiring regulations requirements for testing RCDs. Tests 6mA, 10mA, 30mA, 100mA, 300mA and 500mA Fast, 1 and 1/2 trip current settings Fast 40ms test capability for RCDs rated at 30mA or less Test current accuracy ± 3% at nominal supply voltage Timing accuracy ±2% ± 1 digit Selective 0° or 180° test cycle start polarity Polarity of supply is confirmed by neons Tests to BS7671, 713-12 and 412-06-02 Supplied with Test lead (BS1363 plug), batteries, instructions and carrying case.

IRT1900 Digital RCD Tester Custom microprocessor for highest accuracy and reliability 3 LED’s for checking correct wiring status 0° and 180° phase angle switch permits quick tests and consistent readings Visual indication of reversed phase & neutral wiring at socket Digital read out of tripping time General Safety EN61557; BS7671, EN61010-1 300V CAT III Display Type LCD Dimensions 70 x 130 x 180mm Weight 800g Specification Tripping current 10 / 20 / 30 / 100 / 300 / 500mA Fault condition setting x1/2, x1 & x5 Fault trip time 2000ms, 40ms (x5) Low set resolution 1ms (x1/2, x1) & 0.1ms (x5) Trip time accuracy ± (1% rdg + Dgts) Operating voltage 230V ±10%, 50/60Hz Withstand voltage 3000V AC for 1 minute Operating temperature & humidity 0 to 40°C below 80% RH Supplied with Test leads

KMP7020 Digital RCD Tester The RCD tester is simple to use device designed to check for correct operation of RCD devices. It features three levels of trip currents with Fast Trip for complete range of testing applications. Three levels of trip currents (X1/2, X1, X5) for complete range of testing applications Fast trip function 3-LED proper connection indicator Phase switch selection 0° and 180° for positive and negative semi-cycle testing Large display Safety CAT III 300V Supplied with 3-Wires mains test cord, test lead set with leads/probes/alligator clips, users manual, strap and carrying case.