Products Found: 11
Showing Results For: Video Driver ICs
Video Driver ICs
FILTERS
Filters
Enrgtech #
Manufacturer Part No
Name
Availability
Price
Rating
ROHM
BH76360FV-E2, ROHM
Pre Order
Check Stock & Lead Times Packaging Options
5 +
£ 1.82
100 +
£ 1.64
250 +
£ 1.49
ROHM
BH76330FVM-TR, ROHM
Pre Order
Check Stock & Lead Times Packaging Options
5 +
£ 1.62
25 +
£ 1.31
50 +
£ 1.24
ROHM
BH76806FVM-TR, ROHM
Pre Order
Check Stock & Lead Times Packaging Options
3000 +
£ 0.51
Analog Devices
ADV7611BSWZ, Analog Devices
Pre Order
Check Stock & Lead Times Packaging Options
1 +
£ 8.58
10 +
£ 8.26
50 +
£ 8.17
Analog Devices
ADV212BBCZ-115, Analog Devices
Pre Order
Check Stock & Lead Times Packaging Options
Maxim
MAX3814CHJ+, Maxim
Pre Order
Check Stock & Lead Times Packaging Options
1 +
£ 3.48
25 +
£ 2.78
100 +
£ 2.49
Analog Devices
ADV7604BBCZ-5P, Analog Devices
Pre Order
Check Stock & Lead Times Packaging Options
1 +
£ 14.99
5 +
£ 14.70
Intersil
ISL59833IAZ, Intersil
Pre Order
Check Stock & Lead Times Packaging Options
1 +
£ 3.01
25 +
£ 2.50
Microchip
EQCO31T20.3, Microchip
5 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 13.99
Intersil
ISL79985IRZ, Intersil
778 In Stock
Check Stock & Lead Times Packaging Options
260 +
£ 3.67
Intersil
ISL59830IAZ, Intersil
3 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 2.33
25 +
£ 2.20
Showing
1 -
New Items
New items
EQCO31T20.3, Microchip
Transceivers for CoaXPress® Camera Solutions, Microchip
CoaXPress (CXP) is an asymmetric high-speed point-to-point serial communication standard for the transmission of video and still images, scalable over single or multiple coaxial cables.
This solution supports a high-speed downlink of up to 6.25Gbps per cable for video and images, plus a lower speed, 20Mbps, uplink for communications and control. Video transmission, power and data (control) are simultaneous over a single cable.
EQCO62T20: Transmits ≤ 6.25 Gbps; Receives ≤ 20 Mbit/s
EQCO31T20: Transmits ≤ 3.125 Gbps; Receives ≤ 20 Mbit/s
EQCO62R20: Receives ≤ 6.25 Gbps; Transmits ≤ 20 Mbit/s
EQCO31R20: Receives ≤ 3.125 Gbps; Transmits ≤ 20 Mbit/s
Data Transmission - Microchip
New items
BH76330FVM-TR, ROHM
Composite Video Amplifiers, ROHM Semiconductor
Video Amplifiers & Buffers
New items
MAX3814CHJ+, Maxim
Digital Video Equalisers/Drivers, Maxim Integrated
Video, Maxim Integrated
New items
New items
New items
New items
BH76360FV-E2, ROHM
Composite Video Amplifiers, ROHM Semiconductor
BH76360FV and BH76361FV are video signal switching ICs, each with six inputs and one circuit input, which feature wide dynamic range and frequency response. Since these ICs can be used with low voltage starting at VCC=2.8V, they are applicable not only in stationary devices but also in mobile devices. This product line-up supports a broad range of input signals, depending on whether or not a 6dB video amplifier and video driver are included and what combination of sync tip clamp type and bias (resistor termination) type inputs are used.
Able to use a wide range of power supply voltage, from 2.8V to 5.5V
Wide output dynamic range
Excellent frequency response (100kHz / 10MHz 0dB [typ.])
No crosstalk between channels (Typ. -65dB, f=4.43MHz)
Built-in standby function, circuit current during standby is 0μA (Typ.)
Sync tip clamp input (BH76360FV)
Bias input (Zin=150kohm) (BH76361FV)
6dB amp and 75ohm driver are built in
Enables two load drivers [when using output coupling capacitor]
Able to be used without output coupling capacitor (BH76360FV)
SSOP-B16 compact package
Applications:
Car Audio
Car Navigation
PND (Portable Navigation Device)
Machine Vision Camera for Industrial
Video Amplifiers & Buffers
New items
New items
New items
New items
BH76806FVM-TR, ROHM
ROHM's video drivers feature a built-in charge pump that eliminates the need for large capacitance output tantalum capacitors, a LPF optimized for portable devices, a standby current consumption of 0uA, and the capability to operate from a voltage source as low as 2.5V, making them ideal for high-density applications requiring low power consumption.
Select among four video driver amp gain settings: 6 dB, 9 dB, 12 dB, and 16 dB
Large-output video driver has maximum output voltage of 5.2 Vpp. Wide operation range supports low-voltage operation as well.
No output coupling capacitor is needed, which makes for a more compact design
Built-in standby function sets circuit current to 0 μA (typ.) during standby mode
Clear image reproduction by on-chip 8-order 4.5-MHz LPF (Low Pass Filter)
Bias input method is used to support not only video signals but also chroma signals and RGB signals
MSOP8 compact package
Applications:
Car Audio
Car Navigation
PND (Portable Navigation Device)
Intercom / Baby Monitor
Machine Vision Camera for Industrial