Enrgtech

Deliver to

United Kingdom

Categories

Brands

Part Numbers

Top Products

0

Products Found: 251

Showing Results For: Bluetooth Modules

Bluetooth Modules

What are Bluetooth Modules?

The aim of the Bluetooth module is to establish a secure connection among communicating devices, and this connection can be built by using a wireless connection or by attaching the devices to other communicating devices such as computers and laptops. These modules have embedded a device called a Bluetooth stack, and this device is referred to as a board or chip that is typically configured to perform Bluetooth functionality. It is a highly potential medium for data or signal communication among devices.

 

Bluetooth devices are available in a wide range of sizes, shapes, and types to be compatible with a broad range of applications. Thus, these devices are configured into all sorts of communicating devices in the current technological era.

 

The Bluetooth modules available from Enrgtrech support a wide range of bus and I/O interfaces. Products from renowned brands such as Laird Connectivity, Microchip, Panasonic, and others are included in our selection.

How to select the excellent version of the Bluetooth Module?

Bluetooth is an emerging technology since improvement is being carried out on a daily basis. This technology is classified as such. These classes range from 1, 2, or 3. The level of the device determines the class being used. The Class 1, which is considered the best and is being used in highly potential devices, is crucial and worth it if you are looking for or considering a Bluetooth device; the version is the most important thing to select.

 

Since the version numbers range from 1.0 to 4.0+ and are the same as the class division, the functionality levels are determined by the levels. Version numbers can also serve as a barometer for a module's range and power usage, among other characteristics. The best in its class is held by the higher end of the number range, providing a clear indicator of functionality between modules.


FILTERS
Filters
Showing
1 -
Enrgtech #
Manufacturer Part No
Name
Availability
Price
Rating
Rohs Verified
CYBLE-222014-01, Infineon
Pre Order
Check Stock & Lead Times Packaging Options
500 +
£ 6.78
Rohs Verified
CYBLE-214015-01, Infineon
Pre Order
Check Stock & Lead Times Packaging Options
500 +
£ 11.03
Rohs Verified
CYBLE-416045-02, Infineon
Pre Order
Check Stock & Lead Times Packaging Options
500 +
£ 9.11
Rohs Verified
CYBLE-202007-01, Infineon
Pre Order
Check Stock & Lead Times Packaging Options
500 +
£ 9.62
Rohs Verified
CYBLE-212020-01, Infineon
Pre Order
Check Stock & Lead Times Packaging Options
500 +
£ 8.79
Rohs Verified
CYBLE-012011-00, Infineon
Pre Order
Check Stock & Lead Times Packaging Options
500 +
£ 4.41
1000 +
£ 4.19
Rohs Verified
CYBT-353027-02, Infineon
Pre Order
Check Stock & Lead Times Packaging Options
500 +
£ 6.81
Rohs Verified
CYBT-213043-02, Infineon
Pre Order
Check Stock & Lead Times Packaging Options
500 +
£ 8.62
1000 +
£ 7.76
1500 +
£ 6.98
Rohs Verified
CYW20819A1KFBGT, Infineon
98 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 4.20
10 +
£ 3.78
25 +
£ 3.53
Rohs Verified
CYBT-243053-02, Infineon
Pre Order
Check Stock & Lead Times Packaging Options
500 +
£ 9.18
1000 +
£ 8.26
1500 +
£ 7.43
Rohs Verified
CYBLE-343072-02, Infineon
Pre Order
Check Stock & Lead Times Packaging Options
500 +
£ 8.81
Rohs Verified
CYW20820A1KFBGT, Infineon
98 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 4.58
10 +
£ 3.75
25 +
£ 3.53
Panasonic
Rohs Verified
ENW89858A1KF, Panasonic
498 In Stock
Check Stock & Lead Times Packaging Options
500 +
£ 5.12
Laird Connectivity
Rohs Verified
453-00039C, Laird Connectivity
Pre Order
Check Stock & Lead Times Packaging Options
2 +
£ 6.95
50 +
£ 6.77
200 +
£ 6.60
Laird Connectivity
Rohs Verified
BT850-SA, Laird Connectivity
Pre Order
Check Stock & Lead Times Packaging Options
2500 +
£ 7.54
Laird Connectivity
Rohs Verified
453-00041C, Laird Connectivity
Pre Order
Check Stock & Lead Times Packaging Options
1000 +
£ 6.38
Panasonic
Rohs Verified
ENW89823A5KF, Panasonic
Pre Order
Check Stock & Lead Times Packaging Options
500 +
£ 6.62
1000 +
£ 6.34
2500 +
£ 6.19
Panasonic
Rohs Verified
ENW89823C4KF, Panasonic
Pre Order
Check Stock & Lead Times Packaging Options
500 +
£ 5.54
1000 +
£ 5.34
2500 +
£ 5.22
Milwaukee
Rohs Verified
4933478640, Milwaukee
19 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 34.36
Laird Connectivity
Rohs Verified
453-00052C, Laird Connectivity
Pre Order
Check Stock & Lead Times Packaging Options
100 +
£ 7.82
500 +
£ 7.62
1000 +
£ 7.43
Laird Connectivity
Rohs Verified
453-00053C, Laird Connectivity
Pre Order
Check Stock & Lead Times Packaging Options
100 +
£ 7.82
500 +
£ 7.62
1000 +
£ 7.43
Rohs Verified
CYBT-353027-EVAL, Infineon
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 37.49
5 +
£ 36.53
10 +
£ 35.62
Rohs Verified
CYW954907AEVAL1F, Infineon
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 74.25
2 +
£ 72.34
5 +
£ 70.54
Rohs Verified
CYBLE-202007-EVAL, Infineon
3 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 15.07
5 +
£ 14.67
10 +
£ 14.29
Rohs Verified
CYBT-343151-02, Infineon
498 In Stock
Check Stock & Lead Times Packaging Options
500 +
£ 6.07
Showing
1 -

New Items
New items
BLE112-A-V1, Bluegiga Technologies

BLE112-A-V1, Bluegiga Technologies

BLE112 Bluetooth 4.0 Smart Module The Bluegiga BLE112-A-v1 is a Bluetooth low energy single mode module that is integrated with a chip antenna and software version 1.0. It is a single mode Bluetooth device targeted for low power sensors and accessories such as Watches, Key fobs, Heart rate sensors and many more and can be powered easily using a 3V coin cell batteries or pair of AAA batteries. No external processor is needed when using the BLE112 as it comes with low energy features: radio, stack, profiles and application space for customer applications. Bluetooth v.4.0, single mode compliant Integrated Bluetooth low energy stack Bluetooth low energy profiles Radio performance Ultra low current consumption Bluetooth qualified Applications: Heart rate sensors Pedometers Watches Blood pressure and glucose meters Weight scales Key fobs Households sensors and collector devices Security tags Wireless keys (keyless go) Proximity sensors HID keyboards and mice Indoor GPS broadcasting devices
New items
ENW89823A5KF, Panasonic

ENW89823A5KF, Panasonic

The Panasonic PAN1326C2 is a host controlled interface (HCI) Bluetooth radio frequency (RF) module that brings Texas Instruments seventh generation Bluetooth core integrated circuit, the CC2564C, to an easy-to-use module format. The PAN1326C2 is Bluetooth 5.1 compliant and it offers best-in-class RF performance with about twice the range of other Bluetooth Low Energy (LE) solutions. Bluetooth 5.1 compliant up to the HCI layer Best-in-class Bluetooth RF performance (Tx, Rx sensitivity, blocking) Dimensions: 9 mm ´ 9.5 mm ´ 1.8 mm Based upon Texas Instruments CC2564C Interfaces: UART, GPIO, PCM
New items
CYBT-343026-EVAL, Cypress Semiconductor

CYBT-343026-EVAL, Cypress Semiconductor

The EZ-BT Module Arduino Evaluation Board (CYBT-343026-EVAL) enables you to evaluate and develop applications on the EZ-BT WICED Module, CYBT-343026-01. CYBT-343026-EVAL can be used as a standalone evaluation kit or can be combined with Arduino compatible shields. Configure the evaluation board headers/switches to the desired settings Connect the evaluation board to a PC via a USB cable Refer to KBA221025 for platform files, Makefile target generation, and HCI UART switch position setting for programming Open the WICED Studio IDE, develop your application, program and test
New items
PAN1455-SPP, Panasonic

PAN1455-SPP, Panasonic

Modem Modules 3.0 Bluetooth system solutions enabling integrated Bluetooth connection for your product. These modules utilise the simple AT command set for ease of design via the UART or USB peripheral interface. General Supported Profiles: RFCOMM, SPP device A and B Complete Bluetooth 3.0 + EDR solution Ultra low power design No external components except antenna where not included required On-module voltage regulator. External supply 3.0-3.6V Reference clock included Low power clock from internal oscillator or external low power clock High sensitivity design (-86 dBm typ.) Interfaces 3.25 MBaud UART, USB, I2C and SPI Interface 18 GPIO’s for individual usage for your embedded software 3 Channel ADC and 1 Channel DAC Cortex-M3 ST32F103 core for embedded profiles or application software JTAG for boundary scan and debug Cut the Cable ™ Bluetooth - Panasonic
New items
RN52-I/RM116, Microchip

RN52-I/RM116, Microchip

The RN52 Bluetooth audio module provides a fully integrated solution for delivering high-quality stereo audio in a small form factor. It combines a Class 2 Bluetooth radio with an embedded DSP processor, controlled and configured by simple ASCII commands and GPIO. It integrates RF, a baseband controller, and DSP, making it a complete Bluetooth audio wireless link. The RN52 supports HSP/HFP, A2DP, AVRCP, SPP, and iAP profiles. The RN52 is easily integrated into any system via a simple UART interface. Bluetooth version 3.0 audio module, fully compatible with Bluetooth version 2.1+EDR, 1.2, and 1.1 Software configurable through commands over UART console interface Embedded Bluetooth stack profiles: SPP, A2DP, HFP/HSP, and AVRCP Supports iAP profile discovery for iPhone® and iPod® Bluetooth accessories Postage-stamp-sized form factor, 13.5 x 26 x 2.7mm Dual-channel, differential audio input and output for highest quality audio
New items
CYBT-343151-02, Cypress Semiconductor

CYBT-343151-02, Cypress Semiconductor

CYBT-343151-02 provides all necessary components required to operate BLE and/or BR/EDR communication standards. Proven hardware design ready to use Dual-mode operation eliminates the need for multiple modules Cost optimized for applications without space constraints Nonvolatile memory for self-sufficient operation and Over-the-Air (OTA) updates Bluetooth SIG Listed with QDID and Declaration ID Fully certified module eliminates the time needed for design, development and certification processes WICED™ Studio provides an easy-to-use integrated design environment (IDE) to configure, develop, and program a Bluetooth application
New items
RN42SM-I/RM, Microchip

RN42SM-I/RM, Microchip

RN-42-SM Bluetooth 2.1 + EDR Class 2 Socket Module The RN42-SM is a through-hole PCB module featuring the RN42 Bluetooth Class 2 radio designed for OEMs adding wireless capability to their products. The RN42 is perfect for battery powered applications and by default is ready to use in the SPP (Serial Port Profile) configuration. It uses only 250μA in sleep mode while still being discoverable and connectable. Multiple low power modes available allow you to dial in the lowest power profile for your application. RN42-SM Socket Module RN42 Bluetooth module RS-232 serial interface with RTS/CTS flow control Jumper link header for: Default Baudrate, Auto Discovery, Auto Master and Factory Reset 2 x Status LEDs On-board +3.3V regulator Dimensions: 33 x 23mm RN42 Class 2 Bluetooth module Bluetooth 2.1 + EDR (Enhanced Data Rate) transceiver module Backwards-compatible with Bluetooth 2.0, 1.2 and 1.1 RF Frequency Range: 2.402 to 2.480GHz with 79 channels Modulation: GFSK with FHSS RF Output Power: +4dBm Receiver Sensitivity: -80dBm Host communication: serial UART with RTS/CTS flow control Sustained SPP data rates: 240kbps (slave), 300kbps (master) Embedded Bluetooth stack: GAP, SDP, RFCOMM and L2CAP protocols, with SPP and DUN profile support AES-128 encryption PCB antenna Power supply: +3.0V to +3.6Vdc Operating temperature range: -40 to +85°C Applications: Cable replacement, Barcode scanners, Measurement & monitoring systems, Industrial sensors & controls, Medical devices Note RN42 Bluetooth module also available separately under RS Part No. 765-2879 Approvals Bluetooth, FCC, IC, EN Bluetooth - Microchip
New items
450-0184, Laird Connectivity

450-0184, Laird Connectivity

The Laird Connectivity SaBLE-x-R2 is an Evaluation Kit with PCB Trace Antenna. SaBLE-x-R2 module fully supports the single mode Bluetooth Low Energy operation and the output power can support class 2. 128 kB Flash/20 kB SRAM Size: 11.6 mm x 17.9 mm x 2.4 mm Operating Voltage: 1.8V to 3.8V Operating Temperature: -40 to +85C 61μA/MHz Active CPU Current
New items
453-00039R, Laird Connectivity

453-00039R, Laird Connectivity

The Laird Connectivity BLE module with an integrated antenna (Tape/Reel). BL653 Series module is integrated with OEMs enablement of Bluetooth Low Energy (BLE) v5.1 and thread (802.15.4) to small, portable, power-conscious devices. 802.15.4 (Thread) radio support Multiple programming options No external components required
New items
CYBT-353027-EVAL, Infineon

CYBT-353027-EVAL, Infineon

The EZ-BT Module Arduino Evaluation Board (CYBT-353027-EVAL) enables you to evaluate and develop applications on the EZ-BT WICED Module, CYBT-353027-02. CYBT-353027-EVAL can be used as a standalone evaluation kit or can be combined with Arduino compatible shields. Configure the evaluation board headers/switches to the desired settings Connect the evaluation board to a PC via a USB cable Refer to KBA223509 for platform files, Makefile target generation, and HCI UART switch position setting for programming Open the WICED Studio IDE, develop your application, program and test
New items
CYW954907AEVAL1F, Infineon

CYW954907AEVAL1F, Infineon

Cypress Semiconductor Bluetooth evaluation board The Cypress semiconductor Bluetooth evaluation board is a device that enables you to evaluate and develop single-chip Wi-Fi applications using the CYW54907 device. It is single-chip 802.11ac dual-band (2.4 GHz and 5 GHz) Wi-Fi SoC that features 320-MHz Arm Cortex-R4 MCU device. This kit is supported in WICED Studio IDE. The Arduino compatibility allows to plugin off the shelf shields to expand hardware functionality for quick prototyping. Features and Benefits • 5V to 12V input using USB connector or power jack • Arduino compatible headers for hardware expansion • Custom header to bring out additional GPIOs (WICED header) • On-board PCB antenna with an option to connect external antenna • On-board programmer and debugger using USB interface and USB-UART bridge • One USB 2.0 Type-A to Micro-B cable • RJ45 connector for Ethernet • User switches and LEDs Applications • Embedded • IoT
New items
DVK-RM186-SM, Laird Connectivity

DVK-RM186-SM, Laird Connectivity

The Laird Connectivity Development board with RM186-SM module soldered in place. RM1xx Series module is designed to enable OEMs to add a long range Lora radio link and either Central OR Peripheral mode Bluetooth Low Energy (BLE) to small, portable, power- On-board BLE chip antenna smart BASIC programming language Long range – Lora range up to 15 km Compact footprint
FAQs
We offer free shipping for orders over £200 if delivery is in the UK. All other orders in the UK, shipping from £7.99 depending on the weight and measurement. Mainland Europe shipping charges start from £25. For all other countries shipping charges start from £50 for products like Bluetooth Modules and all others.
You can email us directly at sales@enrgtech.co.uk or via our website for any queries regarding Bluetooth Modules or any other product.
This depends on the Bluetooth Modules individual product and information that can be found on our website.
Yes, we offer special discounts on orders above £200 for Bluetooth Modules and all other products.
UK orders normally take between 2/3 working days. International orders normally take between 3/5 working days for all products including Bluetooth Modules.
Yes. We keep updating our stock frequently and if a product like Bluetooth Modules is not in stock then we will let you know.