What are the shipping charges for products like PoE Injectors?

Yes. We keep updating our stock frequently and if a product like PoE Injectors is not in stock then we will let you know.

How do I contact the Customer Support Team?

Yes. We keep updating our stock frequently and if a product like PoE Injectors is not in stock then we will let you know.

Where are your products like PoE Injectors manufactured?

Yes. We keep updating our stock frequently and if a product like PoE Injectors is not in stock then we will let you know.

Do you offer any discounts on bulk orders of products like PoE Injectors?

Yes. We keep updating our stock frequently and if a product like PoE Injectors is not in stock then we will let you know.

How long will it take to receive the order that I placed for PoE Injectors?

Yes. We keep updating our stock frequently and if a product like PoE Injectors is not in stock then we will let you know.

Are your products PoE Injectors in stock?

Yes. We keep updating our stock frequently and if a product like PoE Injectors is not in stock then we will let you know.

POE Injector | POE Adaptor

New items

POE125U-4-AT-R, Phihong

125W, 4-Port PoE Midspan Injector 4-port Power-over-Ethernet Midspan Injector injects power into ethernet cables to supply power and data to a PoE enabled devices Fully compliant to IEEE802.3at standard 125W power supply providing full power of 33.6W to all four ports - No power management required Supports full power mode of Cisco AP1250 Diagnostic LEDs Over temperature, over voltage/current and short circuit protection Output voltage protection Gigabit compatible (10/100/1000 base-T) Fully regulated output RJ45 Data In and Data/Power Out sockets Harmonic current compliance to EN 61000-3-2 EMI compliance to EN 55022 Class B and FCC Class B UNH IOL tested 3-pin IEC320 C14 mains input socket Note For Industrial Use Only, not in scope of Regulation (EC) No 125/2009 Approvals cUL/UL Standards EN60950-1:2001 Spare Pair and Data Pair powering - ULTRA Power midspans stk nos. 666-8211 (POE60U single-port) and 666-8220 (POE80U single-port), have a combination of Spare Pair and Data Pair powering over the full 8 wires. There are no specific IEEE standards for these yet. The midspans are compliant to the performance of 10baseT, 100baseT and 1000baseT (Gigabit). They have safety features, such as handshake detection, overload, connect and disconnect functionality as for the IEEE802.3af and IEEE802.3at standards but the handshake detection resistance is 12.5KΩ, instead of 25KΩ for the IEEE802.3af and IEEE802.3at standards

Product Detail

New items

POE61W-560DG-R, Phihong

Phihong 60W Power over Ethernet Single Port Midspan Power Injector - POE61W The Phihong POE61 Power over Ethernet, single port, midspan power injector has an AC input range of 90 to 264 Vac, a 56 Vdc output voltage and full 60W Ultra Power output. This 60W DC input Power over Ethernet power injector is gigabit compatible, has a high efficiency of 87% typically and is equipped with short circuit protection and overload protection. Typical applications for the POE61D PoE midspan power injector include security cameras, wireless network access points, LCD displays, kiosks, computer workstations and satellite receivers. Continuous flow of power with no detection Very Low leakage Non-Vented Case 2 or 3 Wire Options Lowest Cost Ultra PoE Full Protection OCP, OVP Level V Efficiency Approvals cUL, UL, CE Spare Pair and Data Pair powering - ULTRA Power midspans stk nos. 666-8211 (POE60U single-port) and 666-8220 (POE80U single-port), have a combination of Spare Pair and Data Pair powering over the full 8 wires. There are no specific IEEE standards for these yet. The midspans are compliant to the performance of 10baseT, 100baseT and 1000baseT (Gigabit). They have safety features, such as handshake detection, overload, connect and disconnect functionality as for the IEEE802.3af and IEEE802.3at standards but the handshake detection resistance is 12.5KΩ, instead of 25KΩ for the IEEE802.3af and IEEE802.3at standards

Product Detail

New items

PENT1040B5600F01, SL POWER AULT

Power over Ethernet Injector PENT1040B Series The SL Power Electronics AULT PENT1040B is a 40W Power over Ethernet gigabit injector with full IEEE802.3at compliance and a wide AC input range of 100 to 250Vac. This Power over Ethernet high power gigabit injector operates at 10/100/1000MbPS data rates. The PENT1040B 40W Power over Ethernet gigabit injector enables non-PoE devices to receive power from the PoE injector via an Ethernet connection. 10/100/1000 (MbPS) Data Rates Self-contained Injector 100-250VAC Universal Input Desktop Style / Non-vented Case Pre-IEEE802.3at Compliant Detection, Disconnect, and Over Voltage Control Function Load Diagnostic LED Over Load Shutdown and Short Circuit Protection Regulated Output with Low Ripple Complies with EMI/RFI Regulations CE Compliant 3-pin IEC320 C14 mains input socket Approvals cULus, TUV, CE Standards UL/CSA60950, EN60950, LVD, EMCD SL Power Electronics PoE Injectors & Splitters

Product Detail

New items

INJ-24A, MOXA

The INJ-24A is a Gigabit high-power PoE+ injector that combines power and data and delivers them to a powered device over one Ethernet cable. Designed for power-hungry devices, the INJ-24A injector provides up to 60 watts, which is twice as much power as conventional PoE+ injectors. The injector also includes features such as a DIP switch configurator and LED indicator for PoE management, and it can also support 24/48 VDC power inputs for power redundancy and operational flexibility. DIP switch configurator and LED indicator for PoE management 3 kV surge resistance for harsh environments Mode A and Mode B selectable for flexible installation -40 to 75°C operating temperature range (-T model)

Product Detail

New items

SPL-24-T, MOXA

The Moxa Europe PoE splitter perform the role of powered devices (PDs) and split power from the injector to Ethernet devices. When using Moxas devices, power and data can be transmitted up to 100 meters (328 feet) from the power source equipment (PSE). It supports output power up to 12.95 W at 24 VDC. IEEE 802.3af compliant splits power and data from PoE equipment Short-circuit protection for power output -40 to 75°C operating temperature range (-T model) DIN-rail mounting ability

Product Detail

New items

105TX-POE, Red Lion

Series 1000 - PoE Unmanaged Switches Red Lions Industrial PoE solutions of the Series 100 are designed to transmit power and data over an Ethernet network. PoE networks eliminate the need for running separate wires for power and are ideal in installations with devices such as IP surveillance cameras, wireless access points, IP phones and other PoE-enabled devices. PoE Unmanaged Fast Ethernet Switch IEEE 802.3af PoE support Easy plug-and-play operation Metal enclosure DIN Rail mounting Red Lion

Product Detail

New items

EB-PSE-24V-1B, Red Lion

The Red Lion EB-PSE is the industrial PoE power injectors add 48VDC power into 1 or 2 ethernet ports so that can pass power and data over the same wire to ethernet devices in the field. The 24V-1 model steps up 24 VDC for sourcing 1 PoE port so no separate DC/DC converter is required. Power sourcing equipment operation Auto detection of PD Supplies up to 15.4 watts per channel

Product Detail

New items

GP-102IT, Edimax

The Edimax power over Ethernet (PoE) injector that not only delivers a cost-effective solution for power distribution, but also provides a seamless way of deployment on the existing LAN infrastructure. With the use of power injectors, DC power of up to 60W based on the IEEE 802.3bt standard and the data that comes from a non-PoE switch or router are merged together and then transmitted to the remote IEEE 802.3af/at/bt compliant products located without power outlet through the Ethernet cabling. Hence, the easy plug-and-play GP-102IT Gigabit PoE++ injector preserves your investment in hardware upgrade without the need for spending on extra PoE switches and deploying power cables. Complies with IEEE 802.3af, IEEE 802.3at and IEEE 802.3bt power over Ethernet (PoE) standards Adds PoE capability to a non-PoE Ethernet switch or router Gigabit LAN ports provide high-speed connectivity Supports PoE powered device (PD) up to 60W PoE short circuit protection to safeguard network devices Delivers power and data to PoE device from up to 100 meters (328 feet) over a single Ethernet cable Reduces installation and equipment costs Easy plug-and-play desktop or wall-mounted installation

Product Detail

New items

POE4805-UK, Oceansmile

The oceansmile injector adapter can be used to power devices with POE support, such as IP cameras or wireless access points (WAPs). Compact, Wall-mounted design makes it easy to install the adapter in areas where space is limited, and can be set in seconds without the need for configuration. Output- 48 V DC 500ma Input- 100-240 V 50/60 Hz Yield- 48v-0.5a Input current- 0.5A Efficiency- 80% min Line / load control- 3% / 5% Rotational speed / noise- 200mv p-p Rotation delay- 2 seconds max Lifting time- 40 MS max Short circuit, overcurrent and voltage protection Compact, portable size with a comfortable design on the wall

Product Detail

New items

SPL-24, MOXA

The Moxa Europe PoE splitter perform the role of powered devices (PDs) and split power from the injector to Ethernet devices. When using Moxas devices, power and data can be transmitted up to 100 meters (328 feet) from the power source equipment (PSE). It supports output power up to 12.95 W at 24 VDC. IEEE 802.3af compliant splits power and data from PoE equipment Short-circuit protection for power output -40 to 75°C operating temperature range (-T model) DIN-rail mounting ability

Product Detail

New items

RPI-A1-8PoE, PoE Injector, Hirschmann

The Hirschmann is a Din Rail mountable single-phase-input power supply with built-in PoE+ injector functionality. It provides a stabilized and galvanically separated SELV/PELV output voltage. It provides 8x RJ45 Ethernet ports for data input and 8xRJ45 Ethernet ports with PoE+ according to standard IEEE802.3at. Fanless Fast/Gigabit PoE Injector Stabilized output Protection class IP20 Power consumption 280 W

Product Detail

New items

INJ-24-T, MOXA

The Moxa Europe INJ-24 is a Gigabit IEEE 802.3at PoE+ injector that combines power and data and delivers them to a powered device over one Ethernet cable. Designed for use with power-hungry devices, the INJ-24 injector provides PoE of up to 30 watts. The -40 to 75°C (-40 to 167°F) operating temperature capability makes the INJ-24 ideally suited to operating in harsh industrial environments. PoE+ injector for 10/100/1000M networks injects power and sends data to PDs (power devices) IEEE 802.3af/at compliant supports a full 30 watt output 24/48 VDC wide range power input

Product Detail