RS PRO Surface Mount Magnetic Catch
Features and Benefits:
Designed for surface mounting
Supplied complete with flexible counterplate
White in colour
Plastic, steel construction
3 mm fixing holes
Holding force 4 kg
Typical Applications
FAQs
Are screws supplied with this magnetic catch?
RS Pro Non-Locking Pressure Catches
Our RS Pro low profile pressure catch have been designed to be installed quickly. The lever latch pulls your doors tight and gives them a sleek look.
Vice Action Ergonomic Knob
Housing and knob are die-cast zinc alloy with black powder coating
One half turn is all that is required to latch the door/panel and pull it up tight
Applies up to 6.4mm of compression to EMI or RFI gasketing material to help eliminate rattles
Two adjustable grip ranges available
No key or special tool required for operation
Snap-in grabber latch
Spring Loaded, over centre latches. This Snap-in grabber latch snaps into frame and pull to open. Mount to door and adjust for smooth latching.
Lift-and-Turn Vice Action
Lift and turn latches provide consistent, pre-set compression against doors or panels
A simple 2 step operation is required to latch: turn the handle to align the positioning pin in the pawl with a slot in the housing, then fold down the handle to complete the latching action and apply compression to the door or panel
To open, simply reverse the procedure
Available in either a natural finish with chemical protective film or with a black powder coat finish
Grabber Door Catch - Side Mount
The catch is manufactured from fibre reinforced nylon, being durable and corrosion resistant
Can be screwed or riveted to door/frame
Mounts inside enclosure
Heavy duty keeper
Push to close, pull to open
Spring loaded over centre action
Available in three pull forces
Super Polar
Polar magnetic catch supplied complete with counterplate
Catch requires 3.5mm screws
Max operating temperature 80°C
Zinc alloy construction
Holding force 8kg
RS Pro Non-Locking Pressure Catches
Our RS Pro low profile pressure catch have been designed to be installed quickly. The lever latch pulls your doors tight and gives them a sleek look.
Double Ball
Manufactured from nickel plated brass for excellent corrosion and wear resistance
Screw adjustment on all sizes to vary the holding tension to suit individual applications
May be side or front fitted
Four alternative sizes offered
Fixing M4 CSK
Pinet Thin Steel Compact Magnetic Catch
Suitable for temperatures up to 100°C
Metal construction
Holding force 2.7kg
Fixing centres 25mm
O/A size 35 x 12 x 2.2mm
RS PRO Surface Mount Magnetic Catch
Features and Benefits:
Designed for surface mounting
Supplied complete with flexible counterplate
White in colour
Plastic, steel construction
3 mm fixing holes
Holding force 4 kg
Typical Applications
FAQs
Are screws supplied with this magnetic catch?
RS Pro Non-Locking Pressure Catches
Our RS Pro low profile pressure catch have been designed to be installed quickly. The lever latch pulls your doors tight and gives them a sleek look.
Vice Action Ergonomic Knob
Housing and knob are die-cast zinc alloy with black powder coating
One half turn is all that is required to latch the door/panel and pull it up tight
Applies up to 6.4mm of compression to EMI or RFI gasketing material to help eliminate rattles
Two adjustable grip ranges available
No key or special tool required for operation
Snap-in grabber latch
Spring Loaded, over centre latches. This Snap-in grabber latch snaps into frame and pull to open. Mount to door and adjust for smooth latching.
Lift-and-Turn Vice Action
Lift and turn latches provide consistent, pre-set compression against doors or panels
A simple 2 step operation is required to latch: turn the handle to align the positioning pin in the pawl with a slot in the housing, then fold down the handle to complete the latching action and apply compression to the door or panel
To open, simply reverse the procedure
Available in either a natural finish with chemical protective film or with a black powder coat finish
Grabber Door Catch - Side Mount
The catch is manufactured from fibre reinforced nylon, being durable and corrosion resistant
Can be screwed or riveted to door/frame
Mounts inside enclosure
Heavy duty keeper
Push to close, pull to open
Spring loaded over centre action
Available in three pull forces
Super Polar
Polar magnetic catch supplied complete with counterplate
Catch requires 3.5mm screws
Max operating temperature 80°C
Zinc alloy construction
Holding force 8kg
RS Pro Non-Locking Pressure Catches
Our RS Pro low profile pressure catch have been designed to be installed quickly. The lever latch pulls your doors tight and gives them a sleek look.
Double Ball
Manufactured from nickel plated brass for excellent corrosion and wear resistance
Screw adjustment on all sizes to vary the holding tension to suit individual applications
May be side or front fitted
Four alternative sizes offered
Fixing M4 CSK
Pinet Thin Steel Compact Magnetic Catch
Suitable for temperatures up to 100°C
Metal construction
Holding force 2.7kg
Fixing centres 25mm
O/A size 35 x 12 x 2.2mm
We offer free shipping for orders over £200 if delivery is in the UK. All other orders in the UK, shipping from £7.99 depending on the weight and measurement. Mainland Europe shipping charges start from £25. For all other countries shipping charges start from £50 for products like Door Catches and all others.
You can email us directly at sales@enrgtech.co.uk or via our website for any queries regarding Door Catches or any other product.
This depends on the Door Catches individual product and information that can be found on our website.
Yes, we offer special discounts on orders above £200 for Door Catches and all other products.
UK orders normally take between 2/3 working days. International orders normally take between 3/5 working days for all products including Door Catches.
Yes. We keep updating our stock frequently and if a product like Door Catches is not in stock then we will let you know.