UPS Accessories

The Schneider Electric UPS network management card 3 supports reporting UPS information to Building Management Systems or other third party management systems via BACnet/IP (BTL certified) (Single Phase Smart-UPS only) also offers simultaneous remote management access through Telnet and SSH. Remote monitoring and control of an individual UPS by connecting it directly to the network It identifies problematic trends before they escalate or export the data log for analysis Includes: USB cable, User Manual Customize shut down and reboot of connected equipment and UPSs Operating temperature range is from 0 °C to 45 °C

SITOP DC UPS with Capacitors SITOP 24 V power supplies can be expanded with a SITOP UPS500 for bridging short-term power failures in the order of minutes. The high capacity double-layer capacitors supply enough energy to back up the PC operation and application data and to shut down software applications. You can increase the buffer times using SITOP PSU501S expansion modules (up to 3). The IP65 version SITOP UPS500P in long metal housing is ideally suited to distributed use. Features and Benefits • 24 V buffering for a few minutes to allow data to be backed up and applications to be closed. • Maintenance free • Long lifetime, even at high temperatures • High ambient temperatures up to +60 °C • Short charging times • No ventilation is required since no gas is emitted • Distributed applications possible without control cabinet • Software tool, free of charge, for easy configuring and integrating in PC-based systems Product Application Information The high-capacitance double-layer capacitors bridge power failures for a few minutes. The time is normally sufficient, for example, for the safe shutdown of PC-based automation systems. The USB interface and a free software tool enable easy communication with the PC. The capacitors have a long life even at high temperature, and can be used at ambient temperatures of up to 60°C. SITOP UPS500P in IP65 degree of protection can also be installed outside the control cabinet in a distributed configuration. Approvals CE, cULus, ATEX, cCSAus Class I Div 2, GL, ABS, CB

OPTI Durable Series The new DS-I Series UPS provides premium double-conversion back up power and scalable battery runtimes for IT and electrical engineering infrastructure in corporate, healthcare, banking and industrial applications. The entire DS-I Series provides value to customers with demandi ng power environments, including very wide input voltage window, extremely tight output voltage regulation, frequency regulati on, internal bypass, and input power factor correction. Which is perfectly serve their purpose in Servers and Workstation, applicances and small business users Zero transfer time Wide range of input frequency (40∼70HZ) and Output frequency 50/60HZ setting High-performance DSP processor, precision and fast data processing with high reliability Cold start (DC power on) Auto reboot functions Extended battery pack for long service life RS232 and USB port SNMP card slot available The UPS should be charged once every 4 to 6 months if it has not been used for a long time In the regions of hot climates, the battery should be charged and discharged every 2 months. The standard charging time should be at least 12 hours Battery replacement should be performed by qualified personnel Replace batteries with the same number and type of batteries Do not replace the battery individually. All batteries should be replaced at same time following the instructions of the battery supplier Battery maintenance: 1-3KVA UPS only requires minimal maintenance OPTI - On Line

APC NetBotz Rack Sensor Pod 150 NetBotz Rack Sensor Pod 150 connects to a NetBotz appliance and allows you to increase the space monitored by your NetBotz security and environmental monitoring system. The NetBotz 150 includes six sensor ports for monitoring input from APC environmental sensors and other third-party sensors. A-Link communication port Rack mountable Note You can connect the NetBotz 150 to one of the following appliances: NetBotz Rack Monitor 200 (NBRK0200), NetBotz Rack Monitor 450 (NBRK0450), NetBotz Room Monitor 455 (NBWL0455), or NetBotz Rack Monitor 550 (NBRK0550). The Rack Sensor Pod 150 cannot be used with a NetBotz Room Monitor 355. Supplied with Cable ties, Documentation CD, Installation guide, Temperature/Humidity Sensor APC NetBotz® Sensors