Power-One 5A & 10A Single Output Regulated Non-Isolated DC-DC Converter - ZY-2000 Series
Non-isolated dc-dc converter
Z-One® Digital Power, No-Bus™ ZY2000 series
Fully programmable step-down Point-Of-Load module
Integrated digital power conversion and intelligent power management
Wide input voltage range 8 - 14Vdc
Output voltage programmable by external resistor, 0.5 - 5.5Vdc
Output voltage margining
Overcurrent and overtemperature protection
Overvoltage and undervoltage protections, and power good signal tracking the output voltage setpoint
Tracking during turn-on and turn-off with guaranteed slew rates
Sequenced and cascaded modes of operation
Single-wire line for frequency synchronization between multiple POLs
Programmable feedback loop compensation
Flexible fault management and propagation
Start-up into the load pre-biased up to 100%
Full rated current sink
Vertical through-hole mounting - industry standard package
Connection Data
Pin
Function
1
Output voltage
2
Compensation coefficient address
3
Output voltage margining
4
Output voltage trim
5
Enable
6
Power good
7
Power ground
8
Fault status
9
Frequency synchronization line
10
Master mode
11
Input voltage
Note
Derate above 65°C (ZY2105-G), 25°C (ZY2110-G) rated at 10A with 100-500LFM - refer to data sheet for derating graph.
MTBF to Telcordia SR-332.
Approvals
UL recognised component, TUV, CSA
Standards
UL60950, EN 60950-1, CSA C22.2 No. 60950-00 certified