What are the shipping charges for products like Track Rollers?

Yes. We keep updating our stock frequently and if a product like Track Rollers is not in stock then we will let you know.

How do I contact the Customer Support Team?

Yes. We keep updating our stock frequently and if a product like Track Rollers is not in stock then we will let you know.

Where are your products like Track Rollers manufactured?

Yes. We keep updating our stock frequently and if a product like Track Rollers is not in stock then we will let you know.

Do you offer any discounts on bulk orders of products like Track Rollers?

Yes. We keep updating our stock frequently and if a product like Track Rollers is not in stock then we will let you know.

How long will it take to receive the order that I placed for Track Rollers?

Yes. We keep updating our stock frequently and if a product like Track Rollers is not in stock then we will let you know.

Are your products Track Rollers in stock?

Yes. We keep updating our stock frequently and if a product like Track Rollers is not in stock then we will let you know.

Track Rollers | Roller Rail Track | Door Track Rollers

New items

KR30-PPA, SKF

SKF Stud Type Track Rollers Cam followers of the KR design are fitted with needle rollers and have a thick outer ring making them suitable for shock loads. Concentric cam follower The outer ring is guided via the integral flange at the head of the stud and the pressed on side washer SKF Cam followers on the PPA design have axial slide rings of polyamide 66 These slide rings reduce the friction and give relatively cool operation that is advantageous for the grease service life In the radial direction the slide ring forms a narrow gap to the outer ring that protects against course contaminations Operating temperature range is -30 to +100°C The PPA design has an improved profile of the runner surface which gives a better stress distribution, also under misaligned conditions The PPA design has a crowned running surface Supplied with grease nipples Lubrication can be done at the Head or thread end, except KR 16 & 19 which can only be lubricated at the head Dimensions Bearing Reference Length (mm) B Roller Outside Diameter (mm) D Roller Length (mm) C Stud Diameter (mm) d Stud Length (mm) B 1 Stock no. KR16-PPA 28 16 11 6 16 514-180 KR19-PPA 32 19 11 8 20 514-203 KR22-PPA 36 22 12 10 23 514-192 KR26-PPA 36 26 12 10 23 513-834 KR30-PPA 40 30 14 12 25 513-824 KR32-PPA 40 32 14 12 25 513-828 KR35-PPA 52 35 18 16 32.5 514-215 KR40-PPA 58 40 20 18 36.5 514-219 KR47-PPA 66 47 24 20 40.5 514-209 KR52-PPA 66 52 24 20 40.5 514-041 KR62-PPA 80 62 29 24 49.5 513-979 KR72-PPA 80 72 29 24 49.5 513-953 KR80-PPA 100 80 35 30 63 514-045 KR90-PPA 100 90 35 30 63 513-957

Product Detail

New items

RS_471-308, RS PRO

Yoke Type Track Roller Suitable for use as eccentric rollers, guide rollers, rocker valve rollers, cam rollers in slideways or pressure rollers Will also fit user's stud variations Crown ground outside diameter, r = 500mm Operating temperature -30°C to +100°C

Product Detail

New items

RS_471-320, RS PRO

Stud Type Track Roller Suitable for use as eccentric rollers, guide rollers, rocker valve rollers, cam rollers in slideways or pressure rollers 2 O-ring seals, single coated Operating temperature: -30°C to +100°C

Product Detail

New items

RS_471-291, RS PRO

Yoke Type Track Roller Suitable for use as eccentric rollers, guide rollers, rocker valve rollers, cam rollers in slideways or pressure rollers Will also fit user's stud variations Crown ground outside diameter, r = 500mm Operating temperature -30°C to +100°C

Product Detail

New items

RS_471-354, RS PRO

Stud Type Track Roller Suitable for use as eccentric rollers, guide rollers, rocker valve rollers, cam rollers in slideways or pressure rollers 2 O-ring seals, single coated Operating temperature: -30°C to +100°C

Product Detail

New items

RS_471-364, RS PRO

Yoke Type Track Roller Suitable for use as eccentric rollers, guide rollers, rocker valve rollers, cam rollers in slideways or pressure rollers Will also fit user's stud variations Crown ground outside diameter, r = 500mm Operating temperature -30°C to +100°C

Product Detail

New items

305807C-2Z, SKF

SKF Double Row Yoke Type Track Rollers Cam rollers are ball bearings which have a particularly thick-walled outer ring They are ready-to-mount pre-greased units and are used for all types of cam drives, conveyor systems etc The 3058 series with a crowned runner surface should always be used where angular misalignments with respect to the track may be expected and edge stress should be kept to a minimum These wide cam rollers have been developed with a 30° contact angle They are fitted with sheet steel shields which extend into recesses in the inner ring side to keep the lubricant in and contamination out Dimensions Bearing Reference Bore Size Inside Diameter (mm) d Roller Outside Diameter (mm) D Width (mm) B Stock no. 305800C-2Z 10 32 14 514-275 305801C-2Z 12 35 15.9 513-919 305802C-2Z 15 40 15.9 513-890 305803C-2Z 17 47 17.5 513-913 305804C-2Z 20 52 20.6 514-231 305805C-2Z 25 62 20.6 514-196 305806C-2Z 30 72 23.8 514-186 305807C-2Z 35 80 27 513-903

Product Detail

New items

KR16-PPA, SKF

SKF Stud Type Track Rollers Cam followers of the KR design are fitted with needle rollers and have a thick outer ring making them suitable for shock loads. Concentric cam follower The outer ring is guided via the integral flange at the head of the stud and the pressed on side washer SKF Cam followers on the PPA design have axial slide rings of polyamide 66 These slide rings reduce the friction and give relatively cool operation that is advantageous for the grease service life In the radial direction the slide ring forms a narrow gap to the outer ring that protects against course contaminations Operating temperature range is -30 to +100°C The PPA design has an improved profile of the runner surface which gives a better stress distribution, also under misaligned conditions The PPA design has a crowned running surface Supplied with grease nipples Lubrication can be done at the Head or thread end, except KR 16 & 19 which can only be lubricated at the head Dimensions Bearing Reference Length (mm) B Roller Outside Diameter (mm) D Roller Length (mm) C Stud Diameter (mm) d Stud Length (mm) B 1 Stock no. KR16-PPA 28 16 11 6 16 514-180 KR19-PPA 32 19 11 8 20 514-203 KR22-PPA 36 22 12 10 23 514-192 KR26-PPA 36 26 12 10 23 513-834 KR30-PPA 40 30 14 12 25 513-824 KR32-PPA 40 32 14 12 25 513-828 KR35-PPA 52 35 18 16 32.5 514-215 KR40-PPA 58 40 20 18 36.5 514-219 KR47-PPA 66 47 24 20 40.5 514-209 KR52-PPA 66 52 24 20 40.5 514-041 KR62-PPA 80 62 29 24 49.5 513-979 KR72-PPA 80 72 29 24 49.5 513-953 KR80-PPA 100 80 35 30 63 514-045 KR90-PPA 100 90 35 30 63 513-957

Product Detail

New items

RS_471-304, RS PRO

Stud Type Track Roller Suitable for use as eccentric rollers, guide rollers, rocker valve rollers, cam rollers in slideways or pressure rollers 2 O-ring seals, single coated Operating temperature: -30°C to +100°C

Product Detail

New items

305801C-2Z, SKF

SKF Double Row Yoke Type Track Rollers Cam rollers are ball bearings which have a particularly thick-walled outer ring They are ready-to-mount pre-greased units and are used for all types of cam drives, conveyor systems etc The 3058 series with a crowned runner surface should always be used where angular misalignments with respect to the track may be expected and edge stress should be kept to a minimum These wide cam rollers have been developed with a 30° contact angle They are fitted with sheet steel shields which extend into recesses in the inner ring side to keep the lubricant in and contamination out Dimensions Bearing Reference Bore Size Inside Diameter (mm) d Roller Outside Diameter (mm) D Width (mm) B Stock no. 305800C-2Z 10 32 14 514-275 305801C-2Z 12 35 15.9 513-919 305802C-2Z 15 40 15.9 513-890 305803C-2Z 17 47 17.5 513-913 305804C-2Z 20 52 20.6 514-231 305805C-2Z 25 62 20.6 514-196 305806C-2Z 30 72 23.8 514-186 305807C-2Z 35 80 27 513-903

Product Detail

New items

305806C-2Z, SKF

SKF Double Row Yoke Type Track Rollers Cam rollers are ball bearings which have a particularly thick-walled outer ring They are ready-to-mount pre-greased units and are used for all types of cam drives, conveyor systems etc The 3058 series with a crowned runner surface should always be used where angular misalignments with respect to the track may be expected and edge stress should be kept to a minimum These wide cam rollers have been developed with a 30° contact angle They are fitted with sheet steel shields which extend into recesses in the inner ring side to keep the lubricant in and contamination out Dimensions Bearing Reference Bore Size Inside Diameter (mm) d Roller Outside Diameter (mm) D Width (mm) B Stock no. 305800C-2Z 10 32 14 514-275 305801C-2Z 12 35 15.9 513-919 305802C-2Z 15 40 15.9 513-890 305803C-2Z 17 47 17.5 513-913 305804C-2Z 20 52 20.6 514-231 305805C-2Z 25 62 20.6 514-196 305806C-2Z 30 72 23.8 514-186 305807C-2Z 35 80 27 513-903

Product Detail

New items

RS_471-326, RS PRO

Yoke Type Track Roller Suitable for use as eccentric rollers, guide rollers, rocker valve rollers, cam rollers in slideways or pressure rollers Will also fit user's stud variations Crown ground outside diameter, r = 500mm Operating temperature -30°C to +100°C

Product Detail