Products Found: 77
Showing Results For: Sprag Clutch Bearings
Sprag Clutch Bearings
FILTERS
Filters
Enrgtech #
Manufacturer Part No
Name
Availability
Price
Rating
Stieber
CSK 8-L, Stieber
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 106.77
5 +
£ 102.51
Tsubaki
TFS60, Tsubaki
28 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 680.22
Tsubaki
BB40, Tsubaki
91 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 60.42
Tsubaki
BB35-1K-K, Tsubaki
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 66.36
Tsubaki
BB25-2K-K, Tsubaki
8 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 58.19
5 +
£ 55.87
Tsubaki
TSS12, Tsubaki
2 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 91.99
Tsubaki
TSS45, Tsubaki
15 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 268.84
Tsubaki
BB25, Tsubaki
14 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 40.24
5 +
£ 38.63
Tsubaki
BB20-1K-K, Tsubaki
42 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 52.89
5 +
£ 50.78
Tsubaki
TSS40, Tsubaki
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 189.59
Tsubaki
TFS25, Tsubaki
2 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 172.98
Tsubaki
BB20, Tsubaki
9 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 39.34
5 +
£ 37.77
Tsubaki
BB30-2K-K, Tsubaki
2 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 66.13
5 +
£ 63.48
Tsubaki
BB17-1K-K, Tsubaki
4 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 49.50
Tsubaki
BB25-1K-K, Tsubaki
95 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 58.86
5 +
£ 56.50
Tsubaki
BB40-1K-K, Tsubaki
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 71.92
Tsubaki
BB15-2K-K, Tsubaki
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 56.85
5 +
£ 54.57
Tsubaki
TFS17, Tsubaki
20 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 140.40
Tsubaki
BB35, Tsubaki
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 50.09
Tsubaki
BB20-2K-K, Tsubaki
9 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 56.94
5 +
£ 54.67
Tsubaki
TSS50, Tsubaki
16 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 333.98
Tsubaki
BB15, Tsubaki
2 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 39.34
5 +
£ 37.77
Tsubaki
BB17, Tsubaki
3 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 36.67
5 +
£ 35.20
Tsubaki
BB15-1K-K, Tsubaki
2 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 52.89
5 +
£ 50.78
Tsubaki
BB35-2K-K, Tsubaki
2 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 70.55
5 +
£ 67.72
Showing
1 -
New Items
New items
HFL3530-L564, INA
Drawn cup roller clutches are one-way clutches comprising thin‑walled, drawn outer rings with a series of ramps on the inside diameter, plastic cages, pressure springs and needle rollers. They can transmit high torques in one direction and are particularly compact in a radial direction. The roller clutches are available with and without bearing arrangements. Drawn cup roller clutches give very precise indexing, since the individual spring loading of the needle rollers ensures continuous contact between the shaft, needle rollers and ramps.
Drawn cup roller clutches without bearing arrangement
With knurling
Drawn cup roller clutches with bearing arrangement
With knurling
Sealing
Lubrication
Operating temperature
Suffixes
New items
New items
New items
New items
CSK 35-PP, Stieber
Types CSK..P and CSK..PP are sprag type freewheels integrated into 62.. series ball bearings (except size 40). They are bearing supported, delivered grease lubricated and protected against dust of more than 0,3 mm. The use of additional nylos type seals is recommended especially when the working temperature exceeds 50°C. Oil bath lubrication is also possible.
New items
ASNU 20, Stieber
Type ASNU is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. A typical arrangement is to install this type alongside a bearing within the same location tolerances. The inner race is keyed to the shaft. The outer race has positive n6 tolerance, to give a press fit in a H7 housing. Additional side notches in the outer race provide for positive torque transmission. If the housing is to K6 tolerance, use of the notches is not necessary, but the housing must be strong enough to not expand after assembly. This design can accept an axial misalignment of inner and outer race of ± S/2.
New items
New items
New items
New items
New items
New items
HFL0822-L564, INA
Drawn Cup Roller Clutches
INA from Schaeffler drawn cup roller clutches are one-way clutches comprising thin‑walled, drawn outer rings with a series of ramps on the inside diameter. There are also plastic cages, pressure springs and needle rollers. They can transmit high torques in one direction and are compact in a radial direction.
Drawn cup roller clutches give precise indexing, since the individual spring loading of the needle rollers ensures continuous contact between the shaft, needle rollers and ramps. They allow high indexing frequencies due to their low mass and the resulting low moment of inertia of the clamping elements. They also have a low overrunning frictional torque.
Features and Benefits
Lower operating costs
Reduced maintenance due to improved lubrication
Lower heat generation
Less noise
Roller clutches, HF series, do not have a bearing arrangement and can only transmit torques
Roller clutches, HFL series, have an integral plain or rolling bearing arrangement and can support torques and radial forces.
Product Application Information
Drawn cup roller clutches can be used in various applications such as indexing clutches, back-stopping clutches and overrunning clutches. In these cases, the drawn cup roller clutch performs an overrunning or locking function.
Suffixes
KF - Plastic pressure springs
INA