What are the shipping charges for products like Pneumatic Bulkhead Threaded-to-Tube Adaptors?

Yes. We keep updating our stock frequently and if a product like Pneumatic Bulkhead Threaded-to-Tube Adaptors is not in stock then we will let you know.

How do I contact the Customer Support Team?

Yes. We keep updating our stock frequently and if a product like Pneumatic Bulkhead Threaded-to-Tube Adaptors is not in stock then we will let you know.

Where are your products like Pneumatic Bulkhead Threaded-to-Tube Adaptors manufactured?

Yes. We keep updating our stock frequently and if a product like Pneumatic Bulkhead Threaded-to-Tube Adaptors is not in stock then we will let you know.

Do you offer any discounts on bulk orders of products like Pneumatic Bulkhead Threaded-to-Tube Adaptors?

Yes. We keep updating our stock frequently and if a product like Pneumatic Bulkhead Threaded-to-Tube Adaptors is not in stock then we will let you know.

How long will it take to receive the order that I placed for Pneumatic Bulkhead Threaded-to-Tube Adaptors?

Yes. We keep updating our stock frequently and if a product like Pneumatic Bulkhead Threaded-to-Tube Adaptors is not in stock then we will let you know.

Are your products Pneumatic Bulkhead Threaded-to-Tube Adaptors in stock?

Yes. We keep updating our stock frequently and if a product like Pneumatic Bulkhead Threaded-to-Tube Adaptors is not in stock then we will let you know.

Pneumatic Bulkhead | Threaded To Tube Adaptors

New items

KQG2E09-N03, SMC

Bulkhead Connector - KQG2 Series SMCs KQG2 stainless steel range provides engineers with a choice of high performance, lightweight, compact push in fittings for when resistance to corrosion, chemicals and high temperatures is vital. 30% smaller and 62% lighter than the existing KQG range and available to tubing diameters from 3.2 to 16mm. Suitable for use with compressed air, water, steam and able to perform across a diverse range of pressure (-100kPa to 1MPa) and temperature conditions (-5°C to +150°C). Threaded, Tube-to-Tube & Adaptors - SMC KQG2 KQG2 SUS316 Stainless Steel Fittings SMC KQG2 series one-touch pneumatic fittings are manufactured from SUS316 stainless steel, offering corrosion resistant properties that are better than grade 304 stainless steel. SUS316 stainless steel offers higher pitting and corrosion resistance properties, and is especially suitable for chloride environments. Applications KQG2 series one-touch fittings make use of FKM seals and may be used with a variety of tubing including nylon, soft nylon, polyurethane, polyolefin, FEP and PFA. The fittings are suitable for use with steam and are grease-free.

Product Detail

New items

KQG2E23-00, SMC

Bulkhead Union - KQG2 Series SMCs KQG2 stainless steel range provides engineers with a choice of high performance, lightweight, compact push in fittings for when resistance to corrosion, chemicals and high temperatures is vital. 30% smaller and 62% lighter than the existing KQG range and available to tubing diameters from 3.2 to 16mm. Suitable for use with compressed air, water, steam and able to perform across a diverse range of pressure (-100kPa to 1MPa) and temperature conditions (-5°C to +150°C). Threaded, Tube-to-Tube & Adaptors - SMC KQG2 KQG2 SUS316 Stainless Steel Fittings SMC KQG2 series one-touch pneumatic fittings are manufactured from SUS316 stainless steel, offering corrosion resistant properties that are better than grade 304 stainless steel. SUS316 stainless steel offers higher pitting and corrosion resistance properties, and is especially suitable for chloride environments. Applications KQG2 series one-touch fittings make use of FKM seals and may be used with a variety of tubing including nylon, soft nylon, polyurethane, polyolefin, FEP and PFA. The fittings are suitable for use with steam and are grease-free.

Product Detail

New items

KQ2LE13-00A, SMC

Bulkhead Male Elbows KQ2LE The KQ2LE bulkhead male elbow fittings from SMC are quick and easy to install into your pneumatic fittings. These KQ2LE bulkhead male elbows are also more compact in design which means that these elbows can be used within a confined space. Bulkhead male elbow fittings are to be used to connect tubing through a panel and to change tube direction by 90°. The new KQ2 range of products are lighter than previous models and have the advantage of improved insertion and removal forces. Can be used under a wide range of pressures from a low vacuum to 1MPa Low force required for fitting and removal Compact dimensions for use within smaller spaces Bulkhead Adapators Sealant coated threads minimise assembly time. The fittings can be used on vacuum or positive pressure lines. Suitable for use with nylon, soft nylon or polyurethane tube for compressed air or water (general industry) conveyance Maximum operating pressure 10 bar Maximum vacuum operating pressure -100kPa Proof pressure 3MPa Ambient and fluid temperature -5 to +60°C (water 0 - 40°C)

Product Detail

New items

KQ2E03-00A, SMC

Bulkhead Union KQ2E The KQ2E one-touch bulkhead unions are used to connect tubes through a panel and are suitable for use with nylon and polyurethane tubes. The special profile design of these bulkhead unions provide positive sealing under pressure without reducing the flow. When the connector is removed from the tube, the chuck and collet are released, thus preventing them from biting into the tube excessively. Tube-to-tube fitting The special profile design of the seal provides positive sealing under pressure without reduced flow Release button allows tube to be removed easily without damage Maximum operating pressure 10 bar Maximum vacuum operating pressure -100kPa Proof pressure 3MPa Ambient and fluid temperature -5 to +60°C (water 0 to 40°C) Note Models with a -X2 suffix in the Mfr Part No. are copper-free (electroless nickel plated). Bulkhead Adapators Sealant coated threads minimise assembly time. The fittings can be used on vacuum or positive pressure lines. Suitable for use with nylon, soft nylon or polyurethane tube for compressed air or water (general industry) conveyance Maximum operating pressure 10 bar Maximum vacuum operating pressure -100kPa Proof pressure 3MPa Ambient and fluid temperature -5 to +60°C (water 0 - 40°C)

Product Detail

New items

KQG2E16-04, SMC

Bulkhead Connector - KQG2 Series SMCs KQG2 stainless steel range provides engineers with a choice of high performance, lightweight, compact push in fittings for when resistance to corrosion, chemicals and high temperatures is vital. 30% smaller and 62% lighter than the existing KQG range and available to tubing diameters from 3.2 to 16mm. Suitable for use with compressed air, water, steam and able to perform across a diverse range of pressure (-100kPa to 1MPa) and temperature conditions (-5°C to +150°C). Threaded, Tube-to-Tube & Adaptors - SMC KQG2 KQG2 SUS316 Stainless Steel Fittings SMC KQG2 series one-touch pneumatic fittings are manufactured from SUS316 stainless steel, offering corrosion resistant properties that are better than grade 304 stainless steel. SUS316 stainless steel offers higher pitting and corrosion resistance properties, and is especially suitable for chloride environments. Applications KQG2 series one-touch fittings make use of FKM seals and may be used with a variety of tubing including nylon, soft nylon, polyurethane, polyolefin, FEP and PFA. The fittings are suitable for use with steam and are grease-free.

Product Detail

New items

KQ2E23-00A, SMC

Bulkhead Union KQ2E The KQ2E one-touch bulkhead unions are used to connect tubes through a panel and are suitable for use with nylon and polyurethane tubes. The special profile design of these bulkhead unions provide positive sealing under pressure without reducing the flow. When the connector is removed from the tube, the chuck and collet are released, thus preventing them from biting into the tube excessively. Tube-to-tube fitting The special profile design of the seal provides positive sealing under pressure without reduced flow Release button allows tube to be removed easily without damage Maximum operating pressure 10 bar Maximum vacuum operating pressure -100kPa Proof pressure 3MPa Ambient and fluid temperature -5 to +60°C (water 0 to 40°C) Note Models with a -X2 suffix in the Mfr Part No. are copper-free (electroless nickel plated). Bulkhead Adapators

Product Detail

New items

KQ2E13-00A, SMC

Bulkhead Union KQ2E The KQ2E one-touch bulkhead unions are used to connect tubes through a panel and are suitable for use with nylon and polyurethane tubes. The special profile design of these bulkhead unions provide positive sealing under pressure without reducing the flow. When the connector is removed from the tube, the chuck and collet are released, thus preventing them from biting into the tube excessively. Tube-to-tube fitting The special profile design of the seal provides positive sealing under pressure without reduced flow Release button allows tube to be removed easily without damage Maximum operating pressure 10 bar Maximum vacuum operating pressure -100kPa Proof pressure 3MPa Ambient and fluid temperature -5 to +60°C (water 0 to 40°C) Note Models with a -X2 suffix in the Mfr Part No. are copper-free (electroless nickel plated). Bulkhead Adapators Sealant coated threads minimise assembly time. The fittings can be used on vacuum or positive pressure lines. Suitable for use with nylon, soft nylon or polyurethane tube for compressed air or water (general industry) conveyance Maximum operating pressure 10 bar Maximum vacuum operating pressure -100kPa Proof pressure 3MPa Ambient and fluid temperature -5 to +60°C (water 0 - 40°C)

Product Detail

New items

KQ2E06-00NJ, SMC

Bulkhead Union KQ2E The KQ2E one-touch bulkhead unions are used to connect tubes through a panel and are suitable for use with nylon and polyurethane tubes. The special profile design of these bulkhead unions provide positive sealing under pressure without reducing the flow. When the connector is removed from the tube, the chuck and collet are released, thus preventing them from biting into the tube excessively. Tube-to-tube fitting The special profile design of the seal provides positive sealing under pressure without reduced flow Release button allows tube to be removed easily without damage Maximum operating pressure 10 bar Maximum vacuum operating pressure -100kPa Proof pressure 3MPa Ambient and fluid temperature -5 to +60°C (water 0 to 40°C) Note Models with a -X2 suffix in the Mfr Part No. are copper-free (electroless nickel plated). Bulkhead Adapators Sealant coated threads minimise assembly time. The fittings can be used on vacuum or positive pressure lines. Suitable for use with nylon, soft nylon or polyurethane tube for compressed air or water (general industry) conveyance Maximum operating pressure 10 bar Maximum vacuum operating pressure -100kPa Proof pressure 3MPa Ambient and fluid temperature -5 to +60°C (water 0 - 40°C)

Product Detail

New items

KQ2E01-00A, SMC

Bulkhead Union KQ2E The KQ2E one-touch bulkhead unions are used to connect tubes through a panel and are suitable for use with nylon and polyurethane tubes. The special profile design of these bulkhead unions provide positive sealing under pressure without reducing the flow. When the connector is removed from the tube, the chuck and collet are released, thus preventing them from biting into the tube excessively. Tube-to-tube fitting The special profile design of the seal provides positive sealing under pressure without reduced flow Release button allows tube to be removed easily without damage Maximum operating pressure 10 bar Maximum vacuum operating pressure -100kPa Proof pressure 3MPa Ambient and fluid temperature -5 to +60°C (water 0 to 40°C) Note Models with a -X2 suffix in the Mfr Part No. are copper-free (electroless nickel plated). Bulkhead Adapators Sealant coated threads minimise assembly time. The fittings can be used on vacuum or positive pressure lines. Suitable for use with nylon, soft nylon or polyurethane tube for compressed air or water (general industry) conveyance Maximum operating pressure 10 bar Maximum vacuum operating pressure -100kPa Proof pressure 3MPa Ambient and fluid temperature -5 to +60°C (water 0 - 40°C)

Product Detail

New items

KQ2E09-00A, SMC

Bulkhead Union KQ2E The KQ2E one-touch bulkhead unions are used to connect tubes through a panel and are suitable for use with nylon and polyurethane tubes. The special profile design of these bulkhead unions provide positive sealing under pressure without reducing the flow. When the connector is removed from the tube, the chuck and collet are released, thus preventing them from biting into the tube excessively. Tube-to-tube fitting The special profile design of the seal provides positive sealing under pressure without reduced flow Release button allows tube to be removed easily without damage Maximum operating pressure 10 bar Maximum vacuum operating pressure -100kPa Proof pressure 3MPa Ambient and fluid temperature -5 to +60°C (water 0 to 40°C) Note Models with a -X2 suffix in the Mfr Part No. are copper-free (electroless nickel plated). Bulkhead Adapators

Product Detail

New items

KQ2E07-00N, SMC

Bulkhead Union KQ2E The KQ2E one-touch bulkhead unions are used to connect tubes through a panel and are suitable for use with nylon and polyurethane tubes. The special profile design of these bulkhead unions provide positive sealing under pressure without reducing the flow. When the connector is removed from the tube, the chuck and collet are released, thus preventing them from biting into the tube excessively. Tube-to-tube fitting The special profile design of the seal provides positive sealing under pressure without reduced flow Release button allows tube to be removed easily without damage Maximum operating pressure 10 bar Maximum vacuum operating pressure -100kPa Proof pressure 3MPa Ambient and fluid temperature -5 to +60°C (water 0 to 40°C) Note Models with a -X2 suffix in the Mfr Part No. are copper-free (electroless nickel plated). Bulkhead Adapators Sealant coated threads minimise assembly time. The fittings can be used on vacuum or positive pressure lines. Suitable for use with nylon, soft nylon or polyurethane tube for compressed air or water (general industry) conveyance Maximum operating pressure 10 bar Maximum vacuum operating pressure -100kPa Proof pressure 3MPa Ambient and fluid temperature -5 to +60°C (water 0 - 40°C)

Product Detail

New items

KQ2E03-00N, SMC

Bulkhead Union KQ2E The KQ2E one-touch bulkhead unions are used to connect tubes through a panel and are suitable for use with nylon and polyurethane tubes. The special profile design of these bulkhead unions provide positive sealing under pressure without reducing the flow. When the connector is removed from the tube, the chuck and collet are released, thus preventing them from biting into the tube excessively. Tube-to-tube fitting The special profile design of the seal provides positive sealing under pressure without reduced flow Release button allows tube to be removed easily without damage Maximum operating pressure 10 bar Maximum vacuum operating pressure -100kPa Proof pressure 3MPa Ambient and fluid temperature -5 to +60°C (water 0 to 40°C) Note Models with a -X2 suffix in the Mfr Part No. are copper-free (electroless nickel plated). Bulkhead Adapators Sealant coated threads minimise assembly time. The fittings can be used on vacuum or positive pressure lines. Suitable for use with nylon, soft nylon or polyurethane tube for compressed air or water (general industry) conveyance Maximum operating pressure 10 bar Maximum vacuum operating pressure -100kPa Proof pressure 3MPa Ambient and fluid temperature -5 to +60°C (water 0 - 40°C)

Product Detail