Eurocard extensions
Range of extensions for testing single- or double-height Eurocards, depth 160 or 220 mm, with type B or C DIN 41612 connectors.
The ejector mechanism situated at the front supports the board under test.
The board circuits are thus entirely clear of the chassis, considerably facilitating their inspection and verification.
To facilitate fixing of oscilloscope probes, the extension boards can be fitted with terminals (single boards are supplied with 20terminals and doubles with 40).
This option is not available on extensions with 96 // 96 contacts.
The extension is supplied as a kit comprising:
- the board and its connectors
- the support-ejector mechanism
- terminals (if applicable)
KM6 compatible
Solder-resistant protective varnish.
PC / VME Bus Boards
PC Compatible Prototyping Boards
Prototyping boards manufactured from epoxy glass material to BS 4584 part 3 or 16. Card thickness is 1.6 mm. Copper is 305 g/m (1 oz/ft). Edge connector fingers are gold plated to a thickness of 1.5 microns. 1.0 mm (0.040 in.). Diameter holes are pre-drilled on a 2.54 mm (0.1 in.) matrix.
Microboard Pattern
Incorporates, on the component side of the card, a colander ground plane for maximum screening and glitch free high speed operation, and complete solder mask protection.
