What are the shipping charges for products like Multi Function Panel Meters?

Yes. We keep updating our stock frequently and if a product like Multi Function Panel Meters is not in stock then we will let you know.

How do I contact the Customer Support Team?

Yes. We keep updating our stock frequently and if a product like Multi Function Panel Meters is not in stock then we will let you know.

Where are your products like Multi Function Panel Meters manufactured?

Yes. We keep updating our stock frequently and if a product like Multi Function Panel Meters is not in stock then we will let you know.

Do you offer any discounts on bulk orders of products like Multi Function Panel Meters?

Yes. We keep updating our stock frequently and if a product like Multi Function Panel Meters is not in stock then we will let you know.

How long will it take to receive the order that I placed for Multi Function Panel Meters?

Yes. We keep updating our stock frequently and if a product like Multi Function Panel Meters is not in stock then we will let you know.

Are your products Multi Function Panel Meters in stock?

Yes. We keep updating our stock frequently and if a product like Multi Function Panel Meters is not in stock then we will let you know.

Multi Function Panel Meters | Digital Panel Meter | Digital Meter

New items

6.565.010.000, Kubler

Codix 565 - Temperature Controller The process controller Codix 565 with totaliser function displays V and mA analogue input signals in high resolution. In addition it can monitor and control 2 limit values. These fast displays set new standards when it comes to user friendliness. Their easy-to-read 14-segment LED display, easy-to- understand running help texts and a practical quick-start guide eliminate the need to wade through time-consuming full instruction manuals. 6-digit display, 14-segment LED, 14 mm high Simple programming via 4 keys on the front One front key as well as 2 additional inputs can be programmed for specific applications Sampling rate of 10 readings per second Time-controlled totaliser function for totalising the measured values. Can be reset separately MIN/MAX memory function, individually resettable Customer-specific characteristic (linearization) curve via 12 control points for all measurement signal inputs 2 relay outputs (changeover contacts) for limit monitoring with hysteresis and ON/OFF delay function for current measured or totaliser values Inputs and outputs galvanically isolated Digital filter (first-order) for smoothing display fluctuations with unstable input signals Wide range of supply voltage 10 → 30 Vdc/90 → 260 Vac Wide input range: 0/4-20mA, 0/2-10 Vdc, +/-10V Kubler Controller

Product Detail

New items

5715D, PR Electronics

5700 Series - Programmable LED Indicators Range of 5700 series Multi-functional Panel Meters are characterized by their flexibility and stability. The panel meters meet nearly every demand for display readout of process signals, and have universal input and supply capabilities. They provide a real-time measurement of your process value no matter the industry, and are engineered to provide a user-friendly, reliable relay of information, even in demanding environment The 5700 series are easily configured via PC, DIP switches or using built in push buttons on the front of the unit making deployment fast and simple. 4-digit 14-segment LED display Front key programmable, all standard operational parameters can be adjusted of the front function keys Help texts in eight languages available Display is easily scaled to the correct process value (from -9999 to 9999) Input for mA, V, Ohm, RTD, TC and potentiometer Relay output 5715 series: 4 x SPDT Relay output 5714A series: Standard Output Relay output 5714B series: 2 relays Relay output 5714C series: Analogue Output Relay output 5714D series: Analogue Output and 2 relays Analog output 0-20mA IP65 protection on the front For extra protection in extreme environments a splash-proof cover is available (stock-no.: 796-7010 ) PR Electronics Series

Product Detail

New items

RIA16-AA2A, Endress+Hauser

The Endress+Hauser indicator shows the measured signal on the large, backlit display. A bar graph indicates the value graphically for a quick process overview. An editable plain text field displays further information like engineering unit or TAG. Limit value infringement is also signalized and an open collector can be switched. Fiber glass reinforced plastic respectively For applications in hazardous areas

Product Detail

New items

K3HB-XVA 100-240VAC, Omron

The Omron K3HB series has been made complete with the addition of digital signal input models which helps in easy recognition of judgment results using two colour display that can be switched between red and green. It is equipped with a position meter for monitoring operating status trends Series expanded to include DeviceNet models It has water-resistant enclosure conforms to NEMA 4X

Product Detail

New items

XALIS9000U1, JM CONCEPT

The JM CONCEPT digital indicator comes with two-colour display allowing analogue and digital transmission of various signals. The flush-mount housing (IP65 48mm x 96mm x 85) equipped with plug-in connectors and a USB socket on the back. It comes with 1 universal input and 1 isolated analogue output. It supports RS485 USB communication. Precision class 0,1 Input analogue / digital conversion 24 bits Output analogue / digital conversion 16 bits Thermal drift <25ppm Maximum of consumption <11.3VA

Product Detail

New items

XALIS9200U0, JM CONCEPT

The JM CONCEPT digital indicator comes with two-colour display allowing analogue and digital transmission of various signals. The flush-mount housing (IP65 48mm x 96mm x 85) equipped with plug-in connectors and a USB socket on the back. It comes with 1 universal input and 1 relay output. It supports RS485 USB communication. Precision class 0,1 Input analogue / digital conversion 24 bits Output analogue / digital conversion 16 bits Thermal drift <25ppm Maximum of consumption <11.3VA

Product Detail

New items

701580/0-04-23-02/000, Jumo

The Jumo Smart digital indicator is available with limit value monitoring function. The smart digital indicator is used for the electronic display of various process variables. This device has terminal blocks with PUSH IN technology which enable fast electrical installation. The operation, parameterization and configuration are carried out via a membrane keyboard with four keys. The setup program on a PC allows the device to be configured without any problems. No separate voltage supply is required when configuring via the USB interface. Integrated timer function Limit value monitoring function Service and operating hours counter High quality display and intuitive operation Operator guidance with text support in 4 languages

Product Detail

New items

701580/0-05-23-02/000, Jumo

The Jumo Smart digital indicator is available with limit value monitoring function. The smart digital indicator is used for the electronic display of various process variables. This device has terminal blocks with PUSH IN technology which enable fast electrical installation. The operation, parameterization and configuration are carried out via a membrane keyboard with four keys. The setup program on a PC allows the device to be configured without any problems. No separate voltage supply is required when configuring via the USB interface. Integrated timer function Limit value monitoring function Service and operating hours counter High quality display and intuitive operation Operator guidance with text support in 4 languages

Product Detail

New items

701590/0-01-25-02, Jumo

The Jumo Smart digital indicator is available with limit value monitoring function. The smart digital indicator is used for the electronic display of a process temperature. The device acquires this via an analogue input for a RTD temperature probe. Further functionalities are limit value monitoring, min and max value storage, hold function and tare function. The device is available with 1 relay and pluggable terminal strips with PUSH IN technology enable fast electrical installation. Integrated timer function Limit value monitoring function Service and operating hours counter High quality display and intuitive operation Operator guidance with text support in 4 languages

Product Detail

New items

K3MA-J 24VAC/DC, Omron

The Omron process meter has highly visible LCD display with 2-color (red and green) LEDs. It has multi-range DC voltage/current input. Average processing function suppresses flicker. Operating voltage range 85% to 110% Shock resistance 150 m/s2

Product Detail

New items

5714B, PR Electronics

5700 Series - Programmable LED Indicators Range of 5700 series Multi-functional Panel Meters are characterized by their flexibility and stability. The panel meters meet nearly every demand for display readout of process signals, and have universal input and supply capabilities. They provide a real-time measurement of your process value no matter the industry, and are engineered to provide a user-friendly, reliable relay of information, even in demanding environment The 5700 series are easily configured via PC, DIP switches or using built in push buttons on the front of the unit making deployment fast and simple. 4-digit 14-segment LED display Front key programmable, all standard operational parameters can be adjusted of the front function keys Help texts in eight languages available Display is easily scaled to the correct process value (from -9999 to 9999) Input for mA, V, Ohm, RTD, TC and potentiometer Relay output 5715 series: 4 x SPDT Relay output 5714A series: Standard Output Relay output 5714B series: 2 relays Relay output 5714C series: Analogue Output Relay output 5714D series: Analogue Output and 2 relays Analog output 0-20mA IP65 protection on the front For extra protection in extreme environments a splash-proof cover is available (stock-no.: 796-7010 ) PR Electronics Series

Product Detail

New items

ACM3P-4-AC1-G-C, Murata Power Solutions

ACM3P - Three-Phase AC Ammeters ACM3P series 3-phase AC ammeters measure and display the true-RMS values of 2- or 3-phase ac mains current. A front panel touch switch enables the selection of a continuous reading of any of the three phases. All ACM3P ammeters are functionally complete, with built-in L1, L2 and L3 current transformers, no other user-supplied components or hardware are required. Their miniature size is ideal for UPS backup power sources, power strips, alternative energy metering, and any other applications that require precise monitoring of 2- or 3-phase ac current. Large 9.2mm, bright LED display Available in red, green, or blue displays with phase annunciators Measure and display the true-RMS current of 3-phase power systems Universal 85-264Vac (47-63Hz) operating supply range Three built-in current transformers measure up to 100A per phase Ideal for power distribution units (PDUs) and backup power systems One-piece polycarbonate housing fits 0U and 1U rack spaces Low-profile surface mount design occupies minimal behind-the-panel space Murata Power Solutions Series

Product Detail