Enrgtech

Deliver to

United Kingdom

Categories

Brands

Part Numbers

Top Products

0

Products Found: 178

Showing Results For: Lighting Ballasts

Lighting Ballasts


FILTERS
Filters
Showing
1 -
Enrgtech #
Manufacturer Part No
Name
Availability
Price
Rating
Rohs Verified
BE 136-EN-2, ELT
Obsolete
Check Stock & Lead Times Packaging Options
1 +
£ 25.62
Rohs Verified
VSE 40/24-C2-AI-P 2Mang, ELT
Pre Order
Check Stock & Lead Times Packaging Options
1 +
£ 133.09
Rohs Verified
PC 2/36 TCL PRO, Tridonic
Pre Order
Check Stock & Lead Times Packaging Options
1 +
£ 23.88
Showing
1 -

New Items
New items
BE 158-4-UN, ELT

BE 158-4-UN, ELT

100V to 260V Electronic Ballasts for T8 Fluorescent Tubes Class I built-in multi-voltage ballasts for T8 tubes. Versatile multi-voltage capability (100 to 260V) therefore also suitable for 110V site lighting applications. Ignition with pre-heating in cathodes for long lamp life without flashes and flickering Constant total power and stabilised luminous flux High frequency operation High energy efficiency Corrected stroboscopic effect Allows the use of Class I and Class II luminaires without screening to earth in the lamps Over voltage protection 350Vac (2 hours) Rapid conncetor with fixing spring. Circular conductor section: 0.5 - 1.5 mm²
New items
7840515-N, Parmar

7840515-N, Parmar

SON/Metal Halide Ballasts designed for use with high pressure sodium (SON) and metal halide lamps. Note See later in this section for suitable ignitors necessary to strike sodium/metal halide lamps. NOT suitable for use with lamps that have integral control gear.
New items
22185154, Tridonic

22185154, Tridonic

Tridonic PC T5 PRO Electronic Fixed Output Fluorescent Ballasts Highest CELMA Energy Efficiency Index A2 BAT Nominal life time up to 100,000 h (at ta 50 °C with a failure rate max. 0.1 % per 1,000 h) Large temperature range Intelligent Voltage Guard (overvoltage indication and undervoltage shutdown) Precise lamp operation using adjustment of lamp parameters Advanced SMART-Heating for min. 50,000 starts without replacement of lamps Constant luminous flux irrespective of fluctuations in mains voltage Designed for THD For luminaires of protection class I and protection class II Automatic start after replacement of defective lamps Safety shutdown of defective lamps and at end of lamp life (EOL 2) Insulation Displacement Connection (IDC) terminal for rapid automatic or manual wiring For emergency lighting systems as per EN 50172
New items
QTP-OPTIMAL 1x18-40, Osram

QTP-OPTIMAL 1x18-40, Osram

QUICKTRONIC PROFESSIONAL OPTIMAL Electronic Control Gear The Osram Quicktronic Professional Optimal is an electronic control gear for fluorescent and compact fluorescent lamps. This ECG guarantees a long lamp life and is not affected by frequent on/off switching. The Quicktronic Optimal is the perfect electronic ballast for use with motion sensor lighting. This Osram ECG has a very high efficiency, thanks to its cut-off technology. Ideal applications for the Quicktronic Professional Optimal ECG are in emergency lighting systems, industry, offices, corridors, storage rooms, public buildings, sports halls, strip lighting and modernization of existing systems. Long lamp life No adverse effect from frequent on/off switching Automatic restart after lamp replacement Perfect lamp start for applications with motion sensors Very high energy efficiency due to cut-off technology Supply voltage: 220-240V Line voltage: 198-264V Line frequency: 0 Hz | 50 Hz | 60 Hz Lamp start with optimum filament preheating Lifetime: up to 100,000 hours Energy Efficiency Index EEI: A2 BAT Automatic shutdown of defective lamps and at end of life Approvals VDE/VDE EMC Standards EN 61347-2-3, EN 60929
New items
QT-ECO-1X18-21/220-240-S, Osram

QT-ECO-1X18-21/220-240-S, Osram

The OSRAM QUICKTRONIC ECONOMIC lighting has nominal voltage range of 220V to 240V and 50 Hz. It has maximum output power of 21W and Length of 80 mm and Width 40mm. It is used in Public buildings. Supply voltage 220-240 V Line voltage 198-264 V Line frequency 50 Hz Energy Efficiency Index EEI A2 / A3 (depending on lamp) Automatic shutdown of defective lamps and at end of life (EoL)
New items
PC 1/14-35/49/54 T5 PRO-M lp, Tridonic

PC 1/14-35/49/54 T5 PRO-M lp, Tridonic

T5 Multi-Watt Ballasts Integrated lamp detection Operation of T5 lamps of the same length Average life = 50,000 hours (at max ta. with a failure rate ≤ 0.2 % per 1,000 hours) Large temperature range (for values see table) Safety shutdown at end of life Automatic start after replacement of defective lamps For emergency lighting systems as per EN 50172 Constant luminous flux irrespective of fluctuations in mains voltage For luminaires of protection class I and protection class II Temperature protection as per EN 61347-2-3 C5e Insulation Displacement Connection (IDC) terminal for rapid automatic or manual wiring For luminaires with F or M and MM as per EN 60598, VDE 0710 and VDE 0711
New items
HF-P 3/414 TL5 III, Philips Lighting

HF-P 3/414 TL5 III, Philips Lighting

Philips HF-Performer III High Frequency Ballast for TL5 Lamps The Philips HF-Performer III TL5 is a slim high frequency electronic ballast for TL5 and TL5 Eco fluorescent lamps. It is ideal for applications where high energy efficiency is required. The HF Performer III has a robust design, meets all relevant international safety and performance standards and is energy efficient. Rated lamp type: TL5 Rated number of lamps: 3/4 Line voltage: 220 - 240V @50/60Hz Housing dimensions: L280mm x H21mm x W39mm Lifetime: 100000 hours approx. Ignition method: programmed start Approvals ENEC VDE-EMV IEC 60598-2-22 CE
New items
4008321873729, Osram

4008321873729, Osram

Osram Quicktronic Professional Optimal Lighting Ballast Features and Benefits Typical Applications Osram Quicktronic Optimal Alternatives 873-5035 873-5038 873-5032 873-5041
New items
4008321971258, Osram

4008321971258, Osram

QUICKTRONIC FIT Electronic Control Gear The Osram Quicktronic FIT 5 is an electronic control gear for fluorescent lamps. This ECG guarantees a long lamp life and is not affected by frequent on/off switching. The Quicktronic FIT 5 is the perfect electronic ballast for use with motion sensor lighting. This Osram ECG has very high energy efficiency, thanks to its cut-off technology. Ideal applications for the Quicktronic FIT 5 ECG are in emergency lighting systems, offices, corridors, storage rooms, public buildings, strip lighting and modernization of existing systems. Long lamp life No adverse effect from frequent on/off switching Automatic restart after lamp replacement Perfect lamp start for applications with motion sensors Very high energy efficiency due to cut-off technology Supply voltage: 220-240V Line voltage: 198-264V Line frequency: 50 Hz | 60 Hz Lamp start with optimum filament preheating Energy Efficiency Index EEI: A2 Automatic shutdown of defective lamps and at end of life
New items
QTP-OPTIMAL 2x18-40, Osram

QTP-OPTIMAL 2x18-40, Osram

QUICKTRONIC PROFESSIONAL OPTIMAL Electronic Control Gear The Osram Quicktronic Professional Optimal is an electronic control gear for fluorescent and compact fluorescent lamps. This ECG guarantees a long lamp life and is not affected by frequent on/off switching. The Quicktronic Optimal is the perfect electronic ballast for use with motion sensor lighting. This Osram ECG has a very high efficiency, thanks to its cut-off technology. Ideal applications for the Quicktronic Professional Optimal ECG are in emergency lighting systems, industry, offices, corridors, storage rooms, public buildings, sports halls, strip lighting and modernization of existing systems. Long lamp life No adverse effect from frequent on/off switching Automatic restart after lamp replacement Perfect lamp start for applications with motion sensors Very high energy efficiency due to cut-off technology Supply voltage: 220-240V Line voltage: 198-264V Line frequency: 0 Hz | 50 Hz | 60 Hz Lamp start with optimum filament preheating Lifetime: up to 100,000 hours Energy Efficiency Index EEI: A2 BAT Automatic shutdown of defective lamps and at end of life Approvals VDE/VDE EMC Standards EN 61347-2-3, EN 60929
New items
BE 218-4-UN, ELT

BE 218-4-UN, ELT

100V to 260V Electronic Ballasts for T8 Fluorescent Tubes Class I built-in multi-voltage ballasts for T8 tubes. Versatile multi-voltage capability (100 to 260V) therefore also suitable for 110V site lighting applications. Ignition with pre-heating in cathodes for long lamp life without flashes and flickering Constant total power and stabilised luminous flux High frequency operation High energy efficiency Corrected stroboscopic effect Allows the use of Class I and Class II luminaires without screening to earth in the lamps Over voltage protection 350Vac (2 hours) Rapid conncetor with fixing spring. Circular conductor section: 0.5 - 1.5 mm²
FAQs
We offer free shipping for orders over £200 if delivery is in the UK. All other orders in the UK, shipping from £7.99 depending on the weight and measurement. Mainland Europe shipping charges start from £25. For all other countries shipping charges start from £50 for products like Lighting Ballasts and all others.
You can email us directly at sales@enrgtech.co.uk or via our website for any queries regarding Lighting Ballasts or any other product.
This depends on the Lighting Ballasts individual product and information that can be found on our website.
Yes, we offer special discounts on orders above £200 for Lighting Ballasts and all other products.
UK orders normally take between 2/3 working days. International orders normally take between 3/5 working days for all products including Lighting Ballasts.
Yes. We keep updating our stock frequently and if a product like Lighting Ballasts is not in stock then we will let you know.