Products Found: 13
Showing Results For: Plumbing Tools
Plumbing Tools
Plumbing tools are specialist hand tools used by plumbers and DIY enthusiasts to install, repair, and maintain water supply and drainage systems. These tools are specially designed for tasks related to plumbing, including tightening and loosening nuts and bolts and cutting, bending, and threading pipes to ensure work is done efficiently and safely. These specialist tools are significant for a plumber tool set kit and include a range of hand tools, including pipe cutters, wrenches, plungers, etc.
Why Use Plumbing Tools?
Using the proper plumbing tools can save time, money, and potential headaches in the long run. These tools are indispensable for DIYers and professionals, ensuring proper maintenance and installation of different plumbing jobs. These plumbers' tools ensure the job is done correctly, safely, and efficiently.
Key Plumbing Tools and Their Functions:
There are various common plumbing tools, and each suits a different purpose. Among various types, some key plumbing tools include:
- Pipe Wrench – A pipe wrench is a significant, heavy tool for tightening and loosening threaded pipes and fittings. It has adjustable jaws to grip pipes of various sizes.
- Basin Wrench – A wrench with a long shaft and a swivelling jaw at the end, specifically designed for tightening and loosening nuts on faucets in hard-to-reach places.
- Adjustable Wrench – A wrench with an adjustable jaw, allowing it to grip nuts and bolts of various sizes.
- Pipe Bender – Used to make bends in soft copper and other malleable pipes without causing kinks.
- Pipe Cutter – A tool used to make clean cuts on pipes. There are different pipe cutter types, including the standard pipe cutter, the rotary cutter for tight spaces, and the chain cutter for large pipes.
- Plunger – A plunger is a suction device that clears blockages in toilets, sinks, and drains.
- Drain Cleaners – A drain cleaner is designed to unclog blocked drains.
- Pipe Flaring Tool – A pipe flaring tool is designed to widen the end of a pipe or tube to allow it to fit over another pipe or fitting.
- Toilet Auger (Closet Auger) – A tool designed to clear clogs in toilets. It has a long flexible shaft with a spiral tip that can be cranked to dislodge obstructions.
- Teflon Tape (PTFE Tape) – A non-adhesive tape used on threaded joints to prevent leaks.
- Tube and Pipe Brushes – Used to clean the insides of pipes and tubes.
- Tape Measure – Tape measures are crucial for measuring distances and sizes in plumbing work.
FILTERS
Filters
Enrgtech #
Manufacturer Part No
Name
Availability
Price
Rating
Facom
245A.T30, Facom
28 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 7.88
Facom
245A.T20, Facom
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 5.54
Facom
245A.T18, Facom
32 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 5.70
Facom
245A.T14, Facom
61 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 5.58
Facom
245A.T12, Facom
2 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 5.58
Parker
M27412, Parker
16 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 136.31
5 +
£ 132.52
Virax
RS_673-579, Virax
42 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 39.55
Parker
M27410, Parker
65 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 109.36
5 +
£ 106.22
1 +
£ 109.36
Facom
245A.T6, Facom
92 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 3.59
Stanley
0-46-702, Stanley
14 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 25.63
Bahco
363-32, Bahco
19 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 43.32
Facom
245A.T4, Facom
86 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 3.59
Facom
245A.T3, Facom
12 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 3.75
Showing
1 -
New Items
New items
New items
New items
0-46-702, Stanley
Rosewood Sliding Bevel
Rosewood stock with wing nut adjustment for quick blade setting
The offset slot in the blade enables a line to be drawn the full length of the blade without interference from the stock
Brass tips and adjustable screw for protection from wear
Blued steel blade for protection from corrosion
New items
New items
RS_673-579, Virax
Drain Cleaner
A drum type manual drain cleaner for 1 and 2 inch pipes
The spring cable has a usable length of 7.5 metres
The cable storage drum is metal with a lacquered finish and is supplied with a pair of robust work gloves and instructions
New items
245A.T4, Facom
Facom Pipe Flaring Punch
Offers the excellent Facom build quality you expect these punches are a great addition to your kit as an extension or replacement.
To be used with 245.J1 - 245.J2
T3, T4, T6, T8 options
New items
M27410, Parker
Vice Block
Manual flaring tools are used to produce the required 37° flare at the hydraulic tube end to ensure an effective single seal point between the nose of the Triple-Lok flared tube fitting and the tube. These tools are used in a standard workshop vice and the flare is produced by clamping the tube flush in the block halves and hammering the flare pin. A separate block and pin set is used for each tube size.
Flared Tube Fittings
Triple-Lok 37° flared fittings are for use with metric tube. Their simplicity, compact design and ease of assembly have led to their widespread choice for applications that use fluid power in motion control. The steel fittings are ideally suited for low and medium pressure applications up to 350 bar nominal pressure and have an operating temperature range of -40°C to +120°C. Their design is simple. The flaring tool vice and flaring pins (available separately) create a seal and hold fluid under pressure in the system. The tube end is flared to 37° and clamped between the fitting nose and the sleeve when the nut is tightened. This provides an effective single seal point between fitting nose and tube flare. The Parker Triple-Lok fitting consists of three components: fitting body; tube nut; sleeve. For steel fittings it is recommended that seamless drawn steel tubes to DIN 2391/C are used.
New items
245A.T3, Facom
Facom Pipe Flaring Punch
Offers the excellent Facom build quality you expect these punches are a great addition to your kit as an extension or replacement.
To be used with 245.J1 - 245.J2
T3, T4, T6, T8 options
New items
New items
New items
M27412, Parker
Vice Block
Manual flaring tools are used to produce the required 37° flare at the hydraulic tube end to ensure an effective single seal point between the nose of the Triple-Lok flared tube fitting and the tube. These tools are used in a standard workshop vice and the flare is produced by clamping the tube flush in the block halves and hammering the flare pin. A separate block and pin set is used for each tube size.
Flared Tube Fittings
Triple-Lok 37° flared fittings are for use with metric tube. Their simplicity, compact design and ease of assembly have led to their widespread choice for applications that use fluid power in motion control. The steel fittings are ideally suited for low and medium pressure applications up to 350 bar nominal pressure and have an operating temperature range of -40°C to +120°C. Their design is simple. The flaring tool vice and flaring pins (available separately) create a seal and hold fluid under pressure in the system. The tube end is flared to 37° and clamped between the fitting nose and the sleeve when the nut is tightened. This provides an effective single seal point between fitting nose and tube flare. The Parker Triple-Lok fitting consists of three components: fitting body; tube nut; sleeve. For steel fittings it is recommended that seamless drawn steel tubes to DIN 2391/C are used.
New items
