Enjoy 10% savings with code 'SAVE10' when you spend £50 or more! Available online only—enter the code at checkout!

Products Found: 7

Showing Results For: Girder Threaded Rod Clamps

Girder Threaded Rod Clamps

Hanger rods are attached to structures and objects with girder clamps (also known as beam clamps) that eliminate drilling or welding. Passing the rods (wires, cords, and cables) through the clamps contains adjustment pins with single or multiple threads. These clamps are strong and resistant to corrosion. They're mostly galvanized and made of materials like carbon or stainless steel and electrostatically finished. These clamps are designed to fit a wide range of applications and, in most cases, eliminate the need to drill structures on-site, lowering installation costs.

Types of Girder Clamps

  • Weight-bearing capacity, multiple threads (openings), and hole diameters classify girder clamps.
  • The standard clamp, plain, and geared beam trolley are the most common versions. Depending on what you need to do with it will likely impact the decision of which design you purchase.
  • The position-fixing process is simple, consisting of a set of jaws that open and close using a threaded handle. The jaws are designed to fit around a beam and tighten to the beam, creating a stationary attachment point for lifting or suspending objects.
  • The plain version is flexible, allowing you to move them freely along the beam. As a result, the load is easy to shift along the beam.
  • Geared beam trolleys are comparable to the basic type above, including gears and a chain on the wheels. This allows the operator to transfer the load more precisely along the beam, making the procedure easier.

Safety Requirements for Girder Clamps

The following safety requirements should not be limited:

  • Do not lift loads that exceed the clamp's Working Load Limit (WLL).
  • Always check that the identification plate is clear and accessible.
  • Do not pull ordinary girder clamps out of a plane from the side.
  • Inspect the hinge points to ensure that they are secure and can move freely.
  • Ensure the beam or structure to which the clamp is attached has enough WLL or strength to support the anticipated load.
  • Look for symptoms of distortion, cracking, and excessive wear or corrosion in the beam clamp. Carefully inspect all attached hardware, including the hoists, for flaws.
  • Always check that the clamp is secure, including any associated hardware, and that the safety catches are working properly.
  • Please make sure the beam clamp is aligned with the payload's center of gravity to prevent it from swinging or being thrown.
  • Always consult the manufacturer's user guide.

Applications of Girder Clamps

Girder threaded rod clamps have a variety of applications given as under:

  • Girder threaded rods serve as anchor points for heavy loads being lifted or pulled onto trusses and beams. Permanent shackles are connected to some of these rods to provide safer fixing methods.
  • They're used in the construction industry to attach large objects and equipment to I-beams, channels, and flange girders.
  • They are usually applied in constructing bar hoists underneath a structure's roof.
  • They're also employed to secure scaffolding to structural elements such as beams and columns.
  • Beam Fixtures, wires, threaded rods, and other hardware are suspended or secured to beam flanges using girder clamps. 
  • They include clamps for usage on pitched beams and secure fixing without the need for welding or drilling.

Conclusion

We provide a variety of steel-type girder threaded rod clamps designed for suspending and hoisting equipment with different weight ranges. However, you should be aware that there is a limit that should not exceed when lifting a load. 


FILTERS
Filters
Showing
1 -
Enrgtech #
Manufacturer Part No
Name
Availability
Price
Rating
Rohs Verified
RS_291-111, RS PRO
2108 In Stock
Check Stock & Lead Times Packaging Options
10 +
£ 4.18
Rohs Verified
RS_291-082, RS PRO
2523 In Stock
Check Stock & Lead Times Packaging Options
25 +
£ 1.35
25 +
£ 1.35
Rohs Verified
RS_203-7616, RS PRO
23 In Stock
Check Stock & Lead Times Packaging Options
25 +
£ 5.68
Rohs Verified
RS_203-7622, RS PRO
1298 In Stock
Check Stock & Lead Times Packaging Options
25 +
£ 5.58
25 +
£ 5.58
Rohs Verified
RS_291-076, RS PRO
17 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 47.47
Rohs Verified
RS_203-7638, RS PRO
1223 In Stock
Check Stock & Lead Times Packaging Options
25 +
£ 5.59
25 +
£ 5.59
Rohs Verified
RS_291-127, RS PRO
1189 In Stock
Check Stock & Lead Times Packaging Options
10 +
£ 5.13
Showing
1 -

New Items
New items
RS_291-082, RS PRO

RS_291-082, RS PRO

Flange Clamp Galvanised Steel Girder clamps for threaded rod
New items
RS_203-7616, RS PRO

RS_203-7616, RS PRO

RS PRO Beam Clamp M6, Maximum Load 60 kg, 18 mm Keep the beams in your structures secure and supported with these hardy beam clamps. They're part of our trusted RS PRO collection and are designed for threaded rod applications. There's no need to weld and drill beams, as these clamps offer sturdy steel-to-steel connections. The clamp has a thread size of M6, and its maximum flange thickness is 18 mm. It's made entirely of steel and can bear up to 60 kg of load, which makes it indispensable in large construction sites. Its high-strength means it can attach hanger rods, amongst other components, to structures in a number of industrial settings. These robust beam clamps can also be used to provide support to scaffolding. They're RoHS (Restriction of Hazardous Substances) compliant, meaning they contain only minimal traces of harmful materials. They're suitable for use in indoor, non-corrosive environments. Features and Benefits • Beam clamp • Maximum flange thickness of 18 mm • Thread size of M6 • Maximum load of 60 kg • Made from steel • Designed for threaded rod applications • Suitable for construction and industrial purposes • Meets standards ASTM-B117-90 and DIN 50021 for 72 hours of salt spray resistance RS PRO RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.
New items
RS_203-7622, RS PRO

RS_203-7622, RS PRO

RS PRO Beam Clamp M8, Maximum Load 60 kg, 18 mm This robust beam clamp will ensure your structural beams are kept safe and supported. It's part of our tried and trusted RS PRO range. With this beam clamp, you won't need to weld or drill to create secure steel-to-steel connections. It's especially useful in settings where heavy materials need handling, as it can be used to attach hanger rods to structures. With a maximum load capacity of 60 kg and its pure steel construction, this clamp is hardwearing and resistant to corrosion. It has a thread size of M8 and a maximum flange thickness of 18 mm. It'd be an invaluable addition to large construction sites. RS PRO's beam clamps are fully RoHS (Restrictions of Hazardous Substances) certified, so they contain only trace amounts of harmful substances. In addition to industrial purposes, they can also be used to hold scaffolding in place. Features and Benefits • Beam clamp • Maximum flange thickness of 18 mm • Thread size of M8 • Maximum load of 60 kg • Made from steel with an electroplated zinc finish • Designed for threaded rod applications • Suitable for construction and industrial purposes • Meets standards ASTM-B117-90 and DIN 50021 for 72 hours of salt spray resistance RS PRO RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.
New items
RS_291-076, RS PRO

RS_291-076, RS PRO

Flange Clamp Galvanised Steel Girder clamps for threaded rod
New items
RS_203-7638, RS PRO

RS_203-7638, RS PRO

RS PRO Beam Clamp M10, Maximum load 60 kg, 18 mm This hardwearing beam clamp from RS PRO is designed for threaded rod applications, ensuring support and safety across a range of structural beams. Beam clamps provide steel-to-steel connections between beams, eliminating the need for welding and drilling. This clamp can be used to attach hanger rods to structures and objects for a wide range of industrial purposes. It’s especially helpful in areas where heavy materials need handling. This beam clamp has a thread size of M10 and a maximum flange thickness of 18 mm. It’s manufactured entirely from steel, so it’s durable and resistant to corrosion. This high-strength clamp is a must-have for major construction sites and has a maximum load of 60 kg. Our beam clamps are RoHS certified, which means they contain only minimal amounts of restricted hazardous substances. In addition to industrial purposes, they can also be used to hold scaffolding in place. Features and Benefits • Beam clamp • Maximum flange thickness of 18 mm • Thread size of M10 • Maximum load of 60 kg • Made from steel with an electroplated zinc finish • Designed for threaded rod applications • Suitable for construction and industrial purposes • Meets standards ASTM-B117-90 and DIN 50021 for 72 hours of salt spray resistance RS PRO RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.
FAQs
We offer free shipping for orders over £200 if delivery is in the UK. All other orders in the UK, shipping from £7.99 depending on the weight and measurement. Mainland Europe shipping charges start from £25. For all other countries shipping charges start from £50 for products like Girder Threaded Rod Clamps and all others.
You can email us directly at sales@enrgtech.co.uk or via our website for any queries regarding Girder Threaded Rod Clamps or any other product.
This depends on the Girder Threaded Rod Clamps individual product and information that can be found on our website.
Yes, we offer special discounts on orders above £200 for Girder Threaded Rod Clamps and all other products.
UK orders normally take between 2/3 working days. International orders normally take between 3/5 working days for all products including Girder Threaded Rod Clamps.
Yes. We keep updating our stock frequently and if a product like Girder Threaded Rod Clamps is not in stock then we will let you know.