Rust & Corrosion Inhibitors

Heavy Duty Rustshield Deposits a thin waxy film, which gives good corrosion protection in most severe conditions and provides residual lubrication for assembly. Gives protection for up to 12 months out of doors Note Non-flammable propellant Approvals 7777

Ultra-Ever Dry Base Coat This revolutionary Ultra-Ever Dry™ Base Coat from Tap France is a superhydrophobic spray (water) and oleophobic (hydrocarbon) coating treatment that uses nanotechnology to repel most water-based (and some oil-based) liquids. Products can fail for a number of reasons, but water/moisture, oil and dirt contamination can cause products to fail much more quickly. Ultra Ever Dry’s superhydrophobic coating can extend product life significantly; for example, use on electric motors will prevent build-up of moisture on windings, coat nuts and bolts, therefore protecting these against corrosion. Please note: Ultra-Ever Dry™ is a two-part system. Both parts (base and top coat) must be applied for the product to be effective. This Ultra-Ever Dry™ Base Coat should be applied using an air-powered sprayer. The base coat bonds to most materials and acts as the primer, providing a consistent material for the top coat (sold separately) to bond to. Protection types: Anti-wetting – the coating’s superhydrophobic formula keeps objects dry. Water is easily repelled. Anti-contamination – bacteria or radiation that can be found in water and other liquids never actually make contact with the surface of the product – just the Ultra-Ever Dry™ Coating – so contamination is greatly reduced or eliminated leaving the surface easy to decontaminate if necessary. Anti-corrosion – as well as repelling water, the superhydrophobic coating repels saltwater and aqueous acids and bases for enhanced corrosion protection. Anti-icing – due to the superhydrophobic properties of Ultra-Ever Dry, coated materials remain completely dry which stops the formation of ice altogether – or in the case of frost, makes removal significantly easier. Life-extending – keeps products and component parts dry, free from corrosion, free from ice, clean and uncontaminated. Self-cleaning – products coated with Ultra-Ever Dry™ repel dirt and water remaining clean a...

Ultra-Ever Dry Top Coat This revolutionary Ultra-Ever Dry™ Top Coat from Tap France is a superhydrophobic spray (water) and oleophobic (hydrocarbon) coating treatment that uses nanotechnology to repel most water-based (and some oil-based) liquids. Products can fail for a number of reasons, but water/moisture, oil and dirt contamination can cause products to fail much more quickly. Ultra Ever Dry’s superhydrophobic coating can extend product life significantly; for example, use on electric motors will prevent build-up of moisture on windings, coat nuts and bolts, therefore protecting these against future corrosion. Please note: Ultra-Ever Dry™ is a two-part system. Both parts (base and top coat) must be applied for the product to be effective. This Ultra-Ever Dry™ Top Coat should be applied using an air-powered sprayer. The base coat bonds to most materials and acts as the primer, providing a consistent material for the top coat (sold separately) to bond to. The top coat then interacts with the base coat to ’self-assemble’ the surface creating ’high points’ that cause droplets to touch just a small percentage of the coating, enabling water to run cleanly off the surface. Protection types: Anti-wetting – the coating’s superhydrophobic formula keeps objects dry. Water is easily repelled. Anti-contamination – bacteria or radiation that can be found in water and other liquids never actually make contact with the surface of the product – just the Ultra-Ever Dry™ Coating – so contamination is greatly reduced or eliminated leaving the surface easy to decontaminate if necessary. Anti-corrosion – as well as repelling water, the superhydrophobic coating repels saltwater and aqueous acids and bases for enhanced corrosion protection. Anti-icing – due to the superhydrophobic properties of Ultra Ever Dry, coated materials remain completely dry which stops the formation of ice altogether – or in the case of frost, makes removal significantly easier. Life-extending – keep...

Freezes & Releases seized and rust components down to -40C Effective after just 2 minutes Easy spray application Cracks open seized, rusted & corroded joints in just a 2 minutes

Waxoyl Machinery Protection A durable coating designed to protect metal against corrosion. Thick waxy fluid saturated with a very powerful rust killer Forms a flexible weatherproof skin that does not crack, dry out or wash off If skin is scratched it will creep back and reseal itself Easy to apply Wide range of uses including machinery, tanks, pipe work, external electrical equipment and battery contacts Protects metal against corrosion Approvals US, MIL-C