Auto Lubrication LAGD 60 and 125
The SKF SYSTEM 24 is a single-point automatic lubricator, which can be used to supply grease to a single lubrication point. Automatic lubricators can be set to ensure that the correct quantity of lubricant is delivered over a set time period using an inert gas cell. This lubrication procedure allows more accurate control of the amount of lubricant supplied, compared to traditional manual relubrication techniques. The units (dependent on type) contain 60 ml or 125 ml of grease or oil and they are suitable for many lubrication applications. The nominal dispensing period can be set between 1 and 12 months and can also be temporarily deactivated if necessary.
Features and Benefits
Transparent lubricant container reduces gas diffusion
Approved for use in areas with an explosive atmosphere, also, mines and underground areas
Easy to remove end cap
No tools required for installation
Time setting slot allows easy and accurate adjustment of the lubrication flow
Product Application Information
LAGD is a gas driven single point lubricator. It is suitable for direct mounting in dangerous environments with limited available space. Most suitable for points involving frequent lubrication, machine shutdown and safety implications.
Typical applications include electric motors, fans pumps, joints, chains, guides, elevators, conveyors, cranes and bearing housings.
LAGD 60 / WA2
LAGD 125 / WA2
LAGD 125 / FFP2
LAGD 125 / HMT68
Capacity:
60ml
125ml
125ml
125ml
Medium:
LGWA 2 - Multi purpose EP type grease
LGWA 2 - Multi purpose EP type grease
LGHP 2 grease (food processing industry)
LHMT 68 Mineral oil (medium temperature)
Lowest grease purge:
4.5g per month
9g per month
9g per month
9g per month
Ambient temp. range:
-20 to 60°C
-20 to 60°C
-20 to 55°C
-20 to 60°C
Operating temp. range:
-
-
-
-10 to 90°C
Base oil viscosity, 40°C, mm
2
/s
-
-
-
68
Flash point:
-
-
-
222°C
Pour point:
-
-...