Products Found: 84
Showing Results For: SCSI Connectors
SCSI Connectors
What are Small Computer System Interface Connectors?
SCSI stands for Small Computer System Interface; it is a popular interface for transmitting data among certain communicating devices and their peripheral components. These connectors have been frequently installed in households and industrial computing for a long time and have been modified using several iterations and may possibly be used, for instance, to ensure a connection with motherboards with disk drivers.
What are the SCSI connectors used for?
Cables are used by SCSI to connect devices. One end of a cable would typically be inserted into a socket on the motherboard of a computer, while the other end would be plugged into a disc drive or other device. Various connection types may be found on certain cables, and some cables can have up to 16 connectors (allowing 16 devices to be wired together). For inside computer cabinet devices, as opposed to external equipment like scanners or external hard drives, several types of connections may be utilized.
What is a SCSI port?
A small computer systems interface (SCSI) is a typical interface for joining extraneous hardware to a personal computer. According to the specification, it can typically link up to 16 peripheral devices, including one host adapter, utilizing a single bus.
What are the 3 types of SCSI data cables?
Three more transport types with one or more connection types were added by serial SCSI. The compatibility of connections has frequently been sacrificed by manufacturers in favor of size, cost, or convenience. As was stated in the fundamental section above, there are three main types of internal SCSI connections.
- Internal Data Connector (IDC 50; 50 pins)
- Half-Pitch Data Bus (HPDB 68; 68 pins)
- SCA (Single Connection Adaptor)
Is SCSI faster than SATA?
SCSI drives operate more quickly than standard SATA hard drives. You may still use a SCSI drive on your computer. However, if you've upgraded to a SATA SSD, PCIe NVMe SSD, or SAS disc, I advise using your old SCSI drive as an external drive.
FILTERS
Filters
Enrgtech #
Manufacturer Part No
Name
Availability
Price
Rating
Hirose
RS_607-9563, Hirose
95 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 1.90
25 +
£ 1.69
100 +
£ 1.52
Hirose
RS_607-9579, Hirose
96 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 1.74
25 +
£ 1.57
100 +
£ 1.41
Hirose
DX-100-CV1, Hirose
15 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 13.12
5 +
£ 12.46
10 +
£ 11.84
Hirose
DX31A-36P(50), Hirose
59 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 7.89
5 +
£ 7.49
10 +
£ 7.12
Hirose
DX10A-100S(50), Hirose
65 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 14.85
5 +
£ 14.11
10 +
£ 13.39
3M
10250-5212PL, 3M
156 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 6.84
10 +
£ 6.16
25 +
£ 5.79
Hirose
DX31A-28P(50), Hirose
33 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 6.92
5 +
£ 6.57
10 +
£ 6.24
Hirose
DX20A-68S(50), Hirose
84 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 13.44
5 +
£ 12.75
10 +
£ 12.22
ASSMANN WSW
A-57/36 F, ASSMANN WSW
278 In Stock
Check Stock & Lead Times Packaging Options
40 +
£ 3.82
Hirose
DX-68-CV1, Hirose
30 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 12.86
5 +
£ 12.21
10 +
£ 11.68
Hirose
DX-36-CV1, Hirose
15 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 12.34
5 +
£ 11.72
10 +
£ 11.21
Hirose
DX40-50P(55), Hirose
42 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 10.10
5 +
£ 9.60
10 +
£ 9.18
Hirose
DX10-28S(50), Hirose
39 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 7.72
10 +
£ 7.31
25 +
£ 6.57
Hirose
DX30A-68P(50), Hirose
46 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 12.49
10 +
£ 11.88
25 +
£ 10.61
Hirose
DX31A-50P(50), Hirose
282 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 9.59
10 +
£ 9.12
25 +
£ 8.16
Hirose
DX10A-28S(50), Hirose
92 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 10.46
10 +
£ 9.95
25 +
£ 8.89
TE Connectivity
1-5750913-9, TE Connectivity
4 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 16.18
10 +
£ 15.74
25 +
£ 15.33
Hirose
DX10-20S(50), Hirose
91 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 6.51
10 +
£ 6.17
25 +
£ 5.53
Hirose
DX31A-80P(50), Hirose
310 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 12.36
5 +
£ 11.74
10 +
£ 11.24
Hirose
DX20A-100S(50), Hirose
37 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 15.50
5 +
£ 14.72
10 +
£ 13.98
Hirose
DX-80-CV1, Hirose
81 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 12.83
5 +
£ 12.19
10 +
£ 11.59
Hirose
DX-50-CV1, Hirose
85 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 12.56
10 +
£ 11.93
25 +
£ 10.68
Hirose
DX-28-CV, Hirose
30 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 8.26
10 +
£ 7.83
25 +
£ 7.01
Hirose
DX-36-CV, Hirose
60 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 8.48
10 +
£ 8.05
25 +
£ 7.21
Hirose
DX-20-CV, Hirose
51 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 6.99
5 +
£ 6.65
10 +
£ 6.31
Showing
1 -
New Items
New items
DX31A-50P(50), Hirose
Hirose original 1.27mm pitch High-Density I/O connectors
1.27mm contact spacing conserves valuable board space and permits ultra-high density designs
Bellow contacts create smooth and precise mating and unmating
Unique shell design assures first make/mast break grounding and overall noise protection
IDC termination allows quick and low cost termination to AWG #28 and #30 wires
Back Shell and receptacle shell are made of diecast zinc alloy to reduce the penetration of external EMI noise
Easy to use 'One-Touch' and 'Screw' locking mechanisms assure quick and easy 'positive' closures every time
Termination method is available in IDC, Soldering, Right Angle Dip, Straight Dip and SMT
DX with 3 cavities and 2 cavities for Co-axial contacts are newly introduced to meet the needs of high speed data transmission
Shielded Plug-in type for interface between 2 Units available
New items
DX-100-CV1, Hirose
Hirose original 1.27mm pitch High-Density I/O connectors
1.27mm contact spacing conserves valuable board space and permits ultra-high density designs
Bellow contacts create smooth and precise mating and unmating
Unique shell design assures first make/mast break grounding and overall noise protection
IDC termination allows quick and low cost termination to AWG #28 and #30 wires
Back Shell and receptacle shell are made of diecast zinc alloy to reduce the penetration of external EMI noise
Easy to use 'One-Touch' and 'Screw' locking mechanisms assure quick and easy 'positive' closures every time
Termination method is available in IDC, Soldering, Right Angle Dip, Straight Dip and SMT
DX with 3 cavities and 2 cavities for Co-axial contacts are newly introduced to meet the needs of high speed data transmission
Shielded Plug-in type for interface between 2 Units available
New items
DX31A-36P(50), Hirose
Hirose original 1.27mm pitch High-Density I/O connectors
1.27mm contact spacing conserves valuable board space and permits ultra-high density designs
Bellow contacts create smooth and precise mating and unmating
Unique shell design assures first make/mast break grounding and overall noise protection
IDC termination allows quick and low cost termination to AWG #28 and #30 wires
Back Shell and receptacle shell are made of diecast zinc alloy to reduce the penetration of external EMI noise
Easy to use 'One-Touch' and 'Screw' locking mechanisms assure quick and easy 'positive' closures every time
Termination method is available in IDC, Soldering, Right Angle Dip, Straight Dip and SMT
DX with 3 cavities and 2 cavities for Co-axial contacts are newly introduced to meet the needs of high speed data transmission
Shielded Plug-in type for interface between 2 Units available
New items
DX30A-100P(50), Hirose
Hirose original 1.27mm pitch High-Density I/O connectors
1.27mm contact spacing conserves valuable board space and permits ultra-high density designs
Bellow contacts create smooth and precise mating and unmating
Unique shell design assures first make/mast break grounding and overall noise protection
IDC termination allows quick and low cost termination to AWG #28 and #30 wires
Back Shell and receptacle shell are made of diecast zinc alloy to reduce the penetration of external EMI noise
Easy to use 'One-Touch' and 'Screw' locking mechanisms assure quick and easy 'positive' closures every time
Termination method is available in IDC, Soldering, Right Angle Dip, Straight Dip and SMT
DX with 3 cavities and 2 cavities for Co-axial contacts are newly introduced to meet the needs of high speed data transmission
Shielded Plug-in type for interface between 2 Units available
New items
DX10A-28S(50), Hirose
Hirose original 1.27mm pitch High-Density I/O connectors
1.27mm contact spacing conserves valuable board space and permits ultra-high density designs
Bellow contacts create smooth and precise mating and unmating
Unique shell design assures first make/mast break grounding and overall noise protection
IDC termination allows quick and low cost termination to AWG #28 and #30 wires
Back Shell and receptacle shell are made of diecast zinc alloy to reduce the penetration of external EMI noise
Easy to use 'One-Touch' and 'Screw' locking mechanisms assure quick and easy 'positive' closures every time
Termination method is available in IDC, Soldering, Right Angle Dip, Straight Dip and SMT
DX with 3 cavities and 2 cavities for Co-axial contacts are newly introduced to meet the needs of high speed data transmission
Shielded Plug-in type for interface between 2 Units available
New items
New items
DX31A-20S(50), Hirose
Hirose original 1.27mm pitch High-Density I/O connectors
1.27mm contact spacing conserves valuable board space and permits ultra-high density designs
Bellow contacts create smooth and precise mating and unmating
Unique shell design assures first make/mast break grounding and overall noise protection
IDC termination allows quick and low cost termination to AWG #28 and #30 wires
Back Shell and receptacle shell are made of diecast zinc alloy to reduce the penetration of external EMI noise
Easy to use 'One-Touch' and 'Screw' locking mechanisms assure quick and easy 'positive' closures every time
Termination method is available in IDC, Soldering, Right Angle Dip, Straight Dip and SMT
DX with 3 cavities and 2 cavities for Co-axial contacts are newly introduced to meet the needs of high speed data transmission
Shielded Plug-in type for interface between 2 Units available
New items
New items
DX30A-80P(50), Hirose
Hirose original 1.27mm pitch High-Density I/O connectors
1.27mm contact spacing conserves valuable board space and permits ultra-high density designs
Bellow contacts create smooth and precise mating and unmating
Unique shell design assures first make/mast break grounding and overall noise protection
IDC termination allows quick and low cost termination to AWG #28 and #30 wires
Back Shell and receptacle shell are made of diecast zinc alloy to reduce the penetration of external EMI noise
Easy to use 'One-Touch' and 'Screw' locking mechanisms assure quick and easy 'positive' closures every time
Termination method is available in IDC, Soldering, Right Angle Dip, Straight Dip and SMT
DX with 3 cavities and 2 cavities for Co-axial contacts are newly introduced to meet the needs of high speed data transmission
Shielded Plug-in type for interface between 2 Units available
New items
DX20A-80S(50), Hirose
Hirose original 1.27mm pitch High-Density I/O connectors
1.27mm contact spacing conserves valuable board space and permits ultra-high density designs
Bellow contacts create smooth and precise mating and unmating
Unique shell design assures first make/mast break grounding and overall noise protection
IDC termination allows quick and low cost termination to AWG #28 and #30 wires
Back Shell and receptacle shell are made of diecast zinc alloy to reduce the penetration of external EMI noise
Easy to use 'One-Touch' and 'Screw' locking mechanisms assure quick and easy 'positive' closures every time
Termination method is available in IDC, Soldering, Right Angle Dip, Straight Dip and SMT
DX with 3 cavities and 2 cavities for Co-axial contacts are newly introduced to meet the needs of high speed data transmission
Shielded Plug-in type for interface between 2 Units available
New items
New items
1734037-4, TE Connectivity
TE Connectivity CHAMP 1.27mm Centerline Connectors
A range of TE Connectivity CHAMP 050 Series 1.27mm Centerline Connectors for various applications such as Board to Board and SCSI.
Champ connectors