What are the shipping charges for products like D-Sub, D-Shaped Connector Backshells, Hoods?

Yes. We keep updating our stock frequently and if a product like D-Sub, D-Shaped Connector Backshells, Hoods is not in stock then we will let you know.

How do I contact the Customer Support Team?

Yes. We keep updating our stock frequently and if a product like D-Sub, D-Shaped Connector Backshells, Hoods is not in stock then we will let you know.

Where are your products like D-Sub, D-Shaped Connector Backshells, Hoods manufactured?

Yes. We keep updating our stock frequently and if a product like D-Sub, D-Shaped Connector Backshells, Hoods is not in stock then we will let you know.

Do you offer any discounts on bulk orders of products like D-Sub, D-Shaped Connector Backshells, Hoods?

Yes. We keep updating our stock frequently and if a product like D-Sub, D-Shaped Connector Backshells, Hoods is not in stock then we will let you know.

How long will it take to receive the order that I placed for D-Sub, D-Shaped Connector Backshells, Hoods?

Yes. We keep updating our stock frequently and if a product like D-Sub, D-Shaped Connector Backshells, Hoods is not in stock then we will let you know.

Are your products D-Sub, D-Shaped Connector Backshells, Hoods in stock?

Yes. We keep updating our stock frequently and if a product like D-Sub, D-Shaped Connector Backshells, Hoods is not in stock then we will let you know.

D Shaped Connectors | D Sub Connectors

New items

MHDTZK15-BK-RA-PC-BK-K, MH Connectors

Top and 45° Entry Diecast Backshells 2 piece diecast zinc backshells with plastic strain relief inserts and earth connection Nickel plate finish. Meets VDE0781 and FCC207 shielding regs Attenuation; >40dB (30MHz to 1GHz) Accepts 3.5mm to 13mm cable

Product Detail

New items

MHDPPK9-G-K, MH Connectors

Single Piece Hoods with Jackscrews A range of MHDPPK SLIM Series Polyamide Hoods available in various colours suitable for any common Sub-D connectors as well as other types of D connector. Hinged one piece plastic construction Snap locking Sophisticated cable clamps to allow a variety of cables to be used, from 4mm O/D to 8.4mm (9-way), 12mm (15 and 25-way), or 14mm (37-way) O/D Available in 9, 15, 25, 37, and 50-way Available in seven colours (not all sizes)

Product Detail

New items

61030012017, HARTING

FULL METAL HOOD 25P H SCR 4-40

Product Detail

New items

MHDPPK15-DB15S-K, MH Connectors

D-Sub Connector Kits with Straight Polyamide PA66 Plastic Hoods and Metal Strain Relief Clamp These Kits of MH Connectors D-Sub MHDPPK-SLIM Series are straight 180° PA66 backshells with either Pin or Socket connectors. The mating part of the contacts in these D-Sub MHDPPK-SLIM Series Kits are Gold plated with the Solder Bucket terminations being Tin plated. The MHDPPK-SLIM Series backshells have a Quick-Lock system that can be re-opened and are suitable for any common D-Sub connector. Cable with upto 11.5 mm outside diameter can be accommodated by the MHDPPK-SLIM Series backshell. The Kits comprise of: Plug or Socket Connector with Solder Buckets 2 Backshell halves 2 4-40 Thumbscrews 1 Plastic Strain Relief 1 Metal Strain Relief Clamp with screws Note Maximum cable diameter for the 9 way is 8 mm. Maximum cable diameter for the 15 and 25 way is 11.5 mm. Approvals Polyamide PA66-UL recognised material D-Sub Connector Kits - MH A range of D-sub Kits which contain a connector, hood and associated screws and cable glands or clamps as specified.

Product Detail

New items

MHDM35-25-K, MH Connectors

MHulti Hood System Die-cast Zinc A range of Die-Cast Zinc Hoods from the MH MHulti Hood System from MH Connectors. Manufactures Part Numbers: MHDM have a Metallised Grommet Kit and Clamp included. MHDM35 are 35° entry with a Metallised Grommet Kit and Clamp included. MHEE have a Metallised Cone and Clamp included. 2-piece diecast hoods offering exceptional RFI/EMI shielding Designed for quick and easy assembly of cable to hood - the cable is held in place whilst the rest of the assembly is completed Metallised plastic bushing inserts or cones provide for a maximum 360° shielding at the critical cable entry points Simple removal of the inserts allow for rework or maintenance Note The cable entry capacity for these hoods is 13mm, this is the largest jacket diameter which the hood will accept. The inserts take cables from 4 to 10mm diameter, this will be measured over the screening. Supplied with Jackscrews and three sizes of metallised plastic cable bushing inserts or a Cone.

Product Detail

New items

MHD45PK25-DB25S-K, MH Connectors

D-Sub Connector Kits with Angled Metalized Plastic Hoods These Kits of MH Connectors D-Sub MHD45PK Series are 45° angled ABS Nickel plated backshells with either Pin or Socket connectors. The mating part of the stamped contacts in these D-Sub MHD45PK Series Kits are Gold plated with the Solder Bucket terminations being Tin plated. The Kits comprise of: Plug or Socket Connector with Solder Buckets 2 Backshell halves 2 4-40 Thumbscrews (except the 9 way which only has one on the none cable entry side) 2 Housing screws and 2 nuts 1 Set of compression inserts for 4, 5, 7 and 9 mm diameter cable ( Note maximum cable diameter is 13 mm) Approvals ABS polylac-UL recognised nickel plated D-Sub Connector Kits - MH A range of D-sub Kits which contain a connector, hood and associated screws and cable glands or clamps as specified.

Product Detail

New items

MHDM25-K, MH Connectors

MHulti Hood System Die-cast Zinc A range of Die-Cast Zinc Hoods from the MH MHulti Hood System from MH Connectors. Manufactures Part Numbers: MHDM have a Metallised Grommet Kit and Clamp included. MHDM35 are 35° entry with a Metallised Grommet Kit and Clamp included. MHEE have a Metallised Cone and Clamp included. 2-piece diecast hoods offering exceptional RFI/EMI shielding Designed for quick and easy assembly of cable to hood - the cable is held in place whilst the rest of the assembly is completed Metallised plastic bushing inserts or cones provide for a maximum 360° shielding at the critical cable entry points Simple removal of the inserts allow for rework or maintenance Note The cable entry capacity for these hoods is 13mm, this is the largest jacket diameter which the hood will accept. The inserts take cables from 4 to 10mm diameter, this will be measured over the screening. Supplied with Jackscrews and three sizes of metallised plastic cable bushing inserts or a Cone.

Product Detail

New items

MHDVSL37-K, MH Connectors

Top and 45° Entry Diecast Backshells 2 piece diecast zinc backshells with plastic strain relief inserts and earth connection Nickel plate finish. Meets VDE0781 and FCC207 shielding regs Attenuation; >40dB (30MHz to 1GHz) Accepts 3.5mm to 13mm cable Dimensions . 9-way Top Entry 15-way Top Entry 25-way Top Entry 37-way Top Entry A (mm) 32 40 54 71 B (mm) 15 15 15 15 C (mm) 40 42 50 46.25 9-way 45° Entry 15-way 45° Entry 25-way 45° Entry 37-way 45° Entry A (mm) 31 39.5 53.2 69.7 B (mm) 14.5 14.5 14.5 14.5 C (mm) 36.3 40.3 40.3 40.3 Note 460-985 has plastic screws. Supplied with Metal 4-40UNC thumbscrews and full instructions, except for slidelock version.

Product Detail

New items

SD121-09, L-com

HOOD DB9 BLK PLASTIC ONE PC

Product Detail

New items

MHDCMR9-DB9S-K, MH Connectors

D-Sub Connector Kits with 90 deg Metal Hoods These Kits of MH Connectors D-Sub MHDCMR9 Series have 90° Die Cast Zinc nickel plated backshells with either Pin or Socket connectors. The mating part of the contacts in these D-Sub MHDCMR9 Series Kits are Gold plated with the Solder Bucket terminations being Tin plated. Stock numbers 787-3849 and 787-3842 have stamped contacts. Stock numbers 787-3846 and 787-3855 have machined contacts. The Kits comprise of: 2 Backshell halves 1 short 4-40 UNC slotted jack screw 1 long 4-40 UNC slotted jack screw 3 Housing screws A two piece plastic Ferrule kit for 4, 5, 7 and 9 mm diameter cable D-Sub Connector Kits - MH A range of D-sub Kits which contain a connector, hood and associated screws and cable glands or clamps as specified.

Product Detail

New items