What are the shipping charges for products like WLAN Modules?

Yes. We keep updating our stock frequently and if a product like WLAN Modules is not in stock then we will let you know.

How do I contact the Customer Support Team?

Yes. We keep updating our stock frequently and if a product like WLAN Modules is not in stock then we will let you know.

Where are your products like WLAN Modules manufactured?

Yes. We keep updating our stock frequently and if a product like WLAN Modules is not in stock then we will let you know.

Do you offer any discounts on bulk orders of products like WLAN Modules?

Yes. We keep updating our stock frequently and if a product like WLAN Modules is not in stock then we will let you know.

How long will it take to receive the order that I placed for WLAN Modules?

Yes. We keep updating our stock frequently and if a product like WLAN Modules is not in stock then we will let you know.

Are your products WLAN Modules in stock?

Yes. We keep updating our stock frequently and if a product like WLAN Modules is not in stock then we will let you know.

WLAN Modules Of Upgraded Versions Available Online

New items

XPW100100B-01, Lantronix

xPico WiFi Embedded Device Server Module Lantronix xPico WiFi embedded device server module can be set up as an Access Point (AP) to a LAN/Internet connection or in Client Mode allowing a device to communicate over WiFi with an AP. This WiFi solution is suitable for mobile M2M applications allowing you to access your data anywhere via a tablet or smartphone using the Internet. This IEEE 802.11 b/g/n compliant wireless module will maintain a secure network connection and has easy access points. XPW100100B-01 xPico WiFi Module (RS 797-6686 ) IEEE 802.11 b/g and IEEE 802.11n (single stream) WLAN interface (2.4 GHz only) IEEE 802.11 d/h/i/j/k/w/r WPS 2.0 support Soft Access Point with DHCP server and Client Mode Lantronix SmartRoam™ Technology QuickConnect: Dynamic Profiles facilitate easy and rapid connections to access points Complete device server application with full IP Stack and web server Embedded Network Protocols: TCP/IP, UDP/IP, DHCP, ARP, ICMP, DHCP, Auto-IP, DNS, SNMPv1 ARM Cortex-M3 core processor with 1MB Flash memory, 128KB SRAM 1MB serial SPI Flash memory Dual UART serial port with data rate of up to 921kbps SPI bus with 20MHz clock rate USB 2.0 full rate device mode IEEE 802.11i Support – WPA-Personal, WPA2-Personal AES-256 encryption u.FL connector for external antenna Power supply: +3.3Vdc Low power (6μA Standby) Dimensions: 24 x 16.5 x 5.64mm Operating temperature range: -40 to +85°C Certifications: FCC Class B, UL and EN EMC, Japan Applications: Local communication for the Internet-of-Things (IoT) XPW100100K-01 xPico WiFi Module Evaluation Kit (RS 797-6682 ) XPW100100B-01 xPico WiFi Module DE9 connector for RS-232/422/485 serial bus MiniUSB Device socket MiniUSB socket for UART-USB bridge connection SMA antenna connector Analogue input header Battery connector RJ45 Ethernet connector (not used by WiFi module) Power-over-Ethernet regulator (not used by WiFi module) User pushbutton Reset pushbutton Wake-Up pushbutton Status LED Serial port acti...

Product Detail

New items

XPC240200S, Lantronix

Delivering seamless and secure Ethernet, Wi-Fi and Bluetooth connectivity, Lantronix xPico 200 series allows OEMS to build and deploy their smart connected products with reduced complexity and lower risk. Dual-band Wi-Fi (802.11 a/b/g/n) and Ethernet xPico 250 Only – Dual-mode Bluetooth (BT and BLE) Automatic network connection management Concurrent Soft AP + client mode for direct wireless service access without disrupting machine field operations Enables operation as network co-processor or wireless MCU Device Management via Lantronix Gateway Central™ Pre-integration with MACH10™ IoT platform Industrial-grade design for operation in extreme environments (-40 C to +85 C) Remote updates and management via Lantronix Gateway Central™

Product Detail

New items

WG1400-00, Jorjin

Simplelink WiFi SiP Module A 2.4GHz wireless communication System-in-Package module providing IEEE 802.11b/g/n WiFi. Wi-Fi Internet-on-a-Chip 2.4GHz IEEE 802.11b/g/n WiFi module based on a TI SimpleLink CC3300 SoC Crypto Engine for Fast, Secure Wi-Fi and Internet Connections with 256-Bit AES Encryption for TLS and SSL Station, AP, and Wi-Fi Direct Modes WPA2 Personal and Enterprise Security UART/SPI serial host processor connection 40MHz internal crystal oscillator Advanced Low-Power Modes Direct battery connection, +2.1 to +3.6Vdc Operating temperature range: -20 to +70°C Dimensions: 23.5 x 23.5 x 1.7mm WiFi driver and multiple Internet protocols in ROM Embedded Wi-Fi Connection Manager with no host processor involvement Applications: Home Automation & Security, Cloud Connectivity, Smart Energy, Industrial Control, Access Control, Smart Plug & Metering, Wireless Audio, IP Network Sensor Nodes and the Internet-of-Things (IoT) WLAN (Wireless Local Area Network) - Jorjin

Product Detail

New items

WA6800-C0, Jorjin

WiFi Audio Module & Demo Board The WA6800-00 is an audio decoder module designed for WiFi streaming applications, as well as local USB playback. An on-board audio processor SoC runs firmware which supports all the major audio standards. WiFi Audio Module WA6800-00 RS Part No 841-2505 Realtek RTD1034 500MHz MIPS24Kc SoC 16MB serial NOR Flash memory 128MB DDR3 SDRAM Audio engine with HW acceleration Realtek 8188ETV CMOS MAC, baseband PHY and RF in a single chip for IEEE 802.11b/g/n compatible WiFi IEEE 802.11e QoS Enhancement (WMM) support 802.11i (WPA, WPA2). Open, shared key and pair-wise key authentication services Supports Wake-On-LAN (WOL) Built-in 24-bit DAC for analogue stereo output IEC-60958 (S/PDIF) multi-channel (4.1) digital audio output USB, UART and I2C serial interfaces LPCM, ADPCM, FLAC, AAC, WAV and OGG Vorbis Codecs RA1/RA-cook/RA-lossless and WMA/WMA Pro (Licensee Only) Power LED Reboot button PCB antenna External antenna socket Power supply: +5Vdc Dimensions: 60 x 30 x 8mm WiFi Audio Module Demo Board WA6800-C0 RS Part No 841-2509 Header socket for WA6800-00 module S/PDIF output socket Stereo output 3.5mm jack socket USB Host access socket MicroUSB socket for +5Vdc power supply Debug socket Re-Flash button Mode LED WLAN (Wireless Local Area Network) - Jorjin

Product Detail

New items

WA6800-00, Jorjin

WiFi Audio Module & Demo Board The WA6800-00 is an audio decoder module designed for WiFi streaming applications, as well as local USB playback. An on-board audio processor SoC runs firmware which supports all the major audio standards. WiFi Audio Module WA6800-00 RS Part No 841-2505 Realtek RTD1034 500MHz MIPS24Kc SoC 16MB serial NOR Flash memory 128MB DDR3 SDRAM Audio engine with HW acceleration Realtek 8188ETV CMOS MAC, baseband PHY and RF in a single chip for IEEE 802.11b/g/n compatible WiFi IEEE 802.11e QoS Enhancement (WMM) support 802.11i (WPA, WPA2). Open, shared key and pair-wise key authentication services Supports Wake-On-LAN (WOL) Built-in 24-bit DAC for analogue stereo output IEC-60958 (S/PDIF) multi-channel (4.1) digital audio output USB, UART and I2C serial interfaces LPCM, ADPCM, FLAC, AAC, WAV and OGG Vorbis Codecs RA1/RA-cook/RA-lossless and WMA/WMA Pro (Licensee Only) Power LED Reboot button PCB antenna External antenna socket Power supply: +5Vdc Dimensions: 60 x 30 x 8mm WiFi Audio Module Demo Board WA6800-C0 RS Part No 841-2509 Header socket for WA6800-00 module S/PDIF output socket Stereo output 3.5mm jack socket USB Host access socket MicroUSB socket for +5Vdc power supply Debug socket Re-Flash button Mode LED WLAN (Wireless Local Area Network) - Jorjin

Product Detail

New items

SPB105-AK-1, H&D Wireless

10-pin RF header WiFi board The SPB105 is a complete WLAN card for evaluation and development on platforms like the Atmel EVK1105 using the AVR32 CPU. The SPB105 enables developers to evaluate and develop their own wireless applications based on the 802.11b/g standard compliant HDG104 and the feature rich AVR32 platform from Atmel. The HDG104 enables a cost efficient ultra low power, high performance and feature rich WiFi client solution. It provides up to 54Mbit/s data rate when operating in the OFDM mode and up to 11Mbit/s data rate when operating in the DSSS/CCK mode. Data Rates: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 and 54Mbps Modulation: QPSK, 16QAM, 64QAM DBPSK, DQPSK, CCK, OFDM with BPSK WEP and AES hardware encryption accelerator up to 128 bit On-chip RF filter for the ISM band 2.4GHz An internal 32kHz oscillator maintains real time in power save mode DMA hardware support for data flow to reduce CPU load. Ultra Low Power (ULP) technology On-board 160KB SRAM and 1KB EEPROM Internal Boot-ROM Advanced power management for optimum power consumption at varying load External interfaces SPI and UART Supply voltage: +2.75 to +3.6V WLAN (Wireless Local Area Network) - H & D Wireless

Product Detail

New items

WIZFI210-EVB, WIZnet Inc

Evaluation Board for WizFi210 Module Bring WiFi connectivity via Serial Host Interface Quick Booting Time under 20ms Ultra Low Power through Dynamic Power Management (34μA at the Standby mode) Operates with standard 802.11b/g/n access point at speed up to11Mbps (IEEE 802.11b) Security Protocol: WEP, WPA/WPA2-PSK, Enterprise EAP-FAST, EAP-TLS, EAP-TTLS, PEAP Operation Temperature -40 to 85℃ Compact Size 32 x 23.5 x 2.9 mm WLAN - WIZnet

Product Detail

New items

ATSAMW25-XPRO, Atmel

SmartConnect ATSAMW25-XPRO Evaluation Kit The ATSAMW25 Xplained Pro Evaluation Kit forms part of the SmartConnect family of wireless solutions from Atmel. With the kit you can evaluate the ATSAM25H18-MR510PB WiFi module with support from Atmel Studio software. Features & Benefits of the ATSAMW25-XPRO Evaluation Kit WiFi Module based on a combination of the 2/4 GHz IEEE® 802.11 b/g/n WiFi SoC and the ARM® Cortex® - M0+ ATSAMD21G18A microcontroller. On-board embedded debugger 2 mechanical buttons 1 yellow user LED 1 WiFi status LED 1 extension header Embedded debugger USB Target USB 8 Mbit serial flash 32 kHz crystal 12 MHz crystal SmartConnect Wi-Fi low power solutions allow engineers without any 802.11, RTOS, IP stack or RF experience, to easily integrate Wi-Fi into their IoT designs. The SmartConnect turnkey software that is available in Atmel Studio enables engineers to dedicate more time to adding functionality to their designs.

Product Detail

New items

SPB106-AP-1, H&D Wireless

Surface mount WiFi board The SPB106 is an SMD module with the HDG104 WLAN System-In-Package and all peripheral components required. It is a complete solution designed to be surface mounted on any host system requiring 802.11b/g WiFi. It provides up to 54Mbit/s data rate when operating in the OFDM mode and up to 11Mbit/s data rate when operating in the DSSS/CCK mode. The host interface supports SPI communication when used with the 10-pin RF-header connection (WLESS), and SDIO when used in a custom board with the AVR32UC3A3. Software drivers and a complete application example are included in Atmel AVR32 UC3B Software Framework from release 1.5.0 onwards Data Rates: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54Mbps Modulation: QPSK, 16QAM, 64QAM DBPSK, DQPSK, CCK, OFDM with BPSK WEP and AES hardware encryption accelerator up to 128 bits Chip Antenna and connector for external antenna (optional) mounted on the board Low power consumption due to efficient class AB PA design UMA Compliant Advanced power management for optimum power consumption at varying load Bluetooth co-existence support Power Supply: +3.3V from EVK board Small footprint 25.8 x 20.6mm WLAN (Wireless Local Area Network) - H & D Wireless

Product Detail

New items

WIZFI210, WIZnet Inc

WizFi210 Ultra Low Power Serial to WiFi Module Bring WiFi connectivity via Serial Host Interface Quick Booting Time under 20ms Ultra Low Power through Dynamic Power Management (34μA at the Standby mode) Operates with standard 802.11b/g/n access point at speed up to11Mbps (IEEE 802.11b) Security Protocol: WEP, WPA/WPA2-PSK, Enterprise, EAP-FAST, EAP-TLS, EAP-TTLS, PEAP Operation Temperature -40 TO 85℃ Compact Size 32 x 23.5 x 2.9 mm CE, FCC, KCC Certified WLAN - WIZnet

Product Detail

New items

SPB104-AL-1, H&D Wireless

SD-card format WiFi board The SPB104 is a complete WLAN card for evaluation and development of the 802.11b/g standard compliant WiFi component HDG104 from H&D Wireless. This highly integrated solution is optimized for customer applications running on a host CPU. The host interface supports SDIO and SPI. Internal RAM comprises both code and data memory eliminating the need for external RAM, Flash or ROM memory interfaces. Baseband firmware, FW, is stored on the host and downloaded at start up. MAC address, trimming values etc are stored in the on board EEPROM. Data Rates: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54Mbps Modulation: QPSK, 16QAM, 64QAM DBPSK, DQPSK, CCK, OFDM with BPSK WEP and AES hardware encryption accelerator up to 128bit On-chip RF filter for the ISM band 2.4GHz Internal 32kHz oscillator maintains real time in power save mode DMA hardware support for data flow to reduce CPU load Uses Ultra Low Power (ULP) technology On-board 160KB SRAM and 1KB EEPROM Internal Boot-ROM Advanced power management for optimum power consumption at varying load. External interfaces including SDIO and SPI Supply voltage: +2.75 to +3.6V WLAN (Wireless Local Area Network) - H & D Wireless

Product Detail

New items

WF111-A, Bluegiga Technologies

WF111-A WiFi Module with Antenna WF111-A Bluegiga is a fully integrated single 2.4GHz band 802.11 b/g/n module, intended for portable and battery powered applications, where Wi-Fi connectivity is needed. WF111-A integrates an IEEE 802.11 b/g/n radio, antenna or U.FL antenna connector and SDIO or CSPI host interfaces. WF111-A provides a low cost and simple Wi-Fi solution for devices that run an operating system and a TCP/IP stack on-board, but still offers the benefits of a module – small form factor, easy integration and certifications. WF111-A s a fully integrated single 2.4GHz band 802.11 b/g/n module, intended for portable and battery powered applications, where Wi-Fi connectivity is needed. WF111 integrates an IEEE 802.11 b/g/n radio, antenna or U.FL antenna connector and SDIO or CSPI host interfaces. Features: IEEE 802.11 b/g/n radio Single stream 2.4 GHz band Bit rates up to 72.2Mbps Integrated antenna or U.FL connector Hardware support for WEP, WPA and WPA2 encryption Soft-AP support SDIO or CSPI host interfaces Fully CE, FCC, IC, Japan and South-Korea certified Operating system drivers for Linux Applications: PoS terminals RFID and laser scanners Wi-Fi internet radios and audio streaming products Wireless cameras Portable navigation devices Portable handheld devices Wi-Fi medical sensors Wireless picture frames Note WF111-A is the WF111 module with and internal chip antenna and can be found using this RS stock number: 8977497. WF111-E is the WF111 module with U.FL connector for external antenna 8977490 and can be found using this RS stock numbe: 8977497.

Product Detail