What are the shipping charges for products like Fibre Optic Patch Panels?

Yes. We keep updating our stock frequently and if a product like Fibre Optic Patch Panels is not in stock then we will let you know.

How do I contact the Customer Support Team?

Yes. We keep updating our stock frequently and if a product like Fibre Optic Patch Panels is not in stock then we will let you know.

Where are your products like Fibre Optic Patch Panels manufactured?

Yes. We keep updating our stock frequently and if a product like Fibre Optic Patch Panels is not in stock then we will let you know.

Do you offer any discounts on bulk orders of products like Fibre Optic Patch Panels?

Yes. We keep updating our stock frequently and if a product like Fibre Optic Patch Panels is not in stock then we will let you know.

How long will it take to receive the order that I placed for Fibre Optic Patch Panels?

Yes. We keep updating our stock frequently and if a product like Fibre Optic Patch Panels is not in stock then we will let you know.

Are your products Fibre Optic Patch Panels in stock?

Yes. We keep updating our stock frequently and if a product like Fibre Optic Patch Panels is not in stock then we will let you know.

Fibre Optic Patch Panels | Fibre Patch Panel | Patch Panels

New items

FFE12-04LCXXXX1/BK, HellermannTyton Data

The HellermannTyton fibre facade enclosure (FFE) is manufactured from UV stable black polycarbonate with a completely detachable lid which can also be snapped back in to position using the snap back hinges allowing unrestricted access to all fibre management areas. The enclosure has 3 separate management areas for inbound cable, fibre splice management and drop cable (customer connection) management. Maximum capacity is 12 LC simplex adaptors 4 inbound & 12 outbound ports Separation of inbound fibre from connectorised drop cables Positive fibre management to maintain consistent 30 mm minimum bend PLC splitter accommodation (60 mm x 7 mm x 4 mm - max. 3) Supports 3A and ANT splice protector types IP55 and IK08 rating Pole or building & facade mounted

Product Detail

New items

FDEC-5WP/WH, HellermannTyton Data

The HellermannTyton three layer closure is manufactured from white ABS and has 6 cable entry points positioned around the closure base to allow for vertical and horizontal mounting positions thereby enabling the management of mid span/in line and cable butt end configurations. The base also provides fibre storage capacity. The hinged splice tray can support up to 18 3A splices double stacked and can accommodate passive optical splitters. Splitter management area Separate exit for drop cables Hinged fibre storage management tray

Product Detail

New items

CCPXT-X11XXX2AP0041X/BK, HellermannTyton Data

The HellermannTyton 2 port CCPXT is fitted with a splice tray with a 3A splice bridge has been designed to be used as an external building entry point. The enclosure can be wall or facade mounted or placed in to a buried chamber located at the property boundary or just outside the point of access providing an external building entry point and network test point. Each cable access point is sealed with a cable entry kit to maintain the IP68 rating. Internal fibre management features ensure that a 30mm minimum bend radius is maintained within the closure and provides storage capacity for any excess fibre. Rear Entry Port Tamperproof lock mount Separate inbound or outbound access points

Product Detail

New items

CCPXX-X1111X2AP004/BK, Amphenol Industrial

The HellermannTyton 4 Port Customer Connection Point XL/XT is used as a Building Entry Point to provide a fibre termination and network demarcation point external to the connected premise in a Fibre to the home FTTH network. It also presents a network test point outside of the customer location. Bend radius managed through the wall port with IP55 environmental sealing. Optional vent gauze feature to prevent moisture condensation.

Product Detail

New items

MB-AFN/FFE-V-BRKT, Amphenol Industrial

The HellermannTyton V shaped pole mounting bracket designed to provide mounting positions for 2 enclosures and which is suitable for use with the AFN and the FFE. Anchoring is provided at the base of the bracket for incoming cables. The bracket is manufactured from powder coated stainless steel and designed not to exceed the width of the pole top. Powder coated Can pre loaded with the enclosures and then secured to the pole

Product Detail

New items

MB-AFN-PWB/BK-400MM, Polyco Healthline

The HellermannTyton universal pole mounting bracket, suitable for use with the aerial fibre node, provides secure anchoring for up to ten metres of ultra light weight cable. Designed not to exceed the width of the pole top the bracket can be preloaded with the enclosure and then secured to the pole. Ultra lightweight and secure anchoring Manage up to 24 distribution drop fibres

Product Detail

New items

MDU-S1XS-T16AP21X, Polyco Healthline

The HellermannTyton MDU S1 XS with 6 LC Duplex Adaptor is designed for deployment within the last mile of the FTTx network. This enclosure can be used within a Point to Point or Point to Multi Point network with the addition of PLC splitters, connectorised or bare end, pigtails and adaptors. It manages up to 6 SC simplex or LC duplex adaptors. It can be supplied pre loaded with fibre adaptors and pigtails as required. Secure maximum of 30 fibre splices Splitter accommodation UV Stable Low Profile Tamper proof

Product Detail

New items

FBPDBKL-LCSMDX-24VF1, Amphenol Industrial

The HellermannTyton LC multimode fibre panel is a 1U 19 inch sliding drawer panel with 24 vertical slots which accept either LC quad or LC duplex adaptors. The panel is supplied pre loaded with the LC adaptors and any unused slots are fitted with blanks and each fibre port is individually numbered for easy identification. The drawer can also be locked to a lower maximum of 10 degree, providing the perfect working platform during installation and maintenance, by sliding the drawer sideways. On board fibre optic management Multiple cable entry options and securing points Available in quad, duplex and single mode

Product Detail

New items

TC1U6PLCDOS2, CAE Multimedia Connect

The CAE Multimedia Connect TC1U panel is ideal for vertical or horizontal applications of optical cabling in LAN application . This 19 1U optical steel panel has a sliding tray that tilts 45° when opened to facilitate implementation or maintenance. When its closed, it provide IP 30 protection. Ready to splice, pre equipped with LCD adapters and 6 pigtails OS2 with cassettes Easy fibre management as adapters and Pigtails already mounted and fixed Easy installation Panels and pigtails tested after assembly operation

Product Detail

New items

7170535, Rittal

The Rittal DK Fibre-optic splicing box is designed to accommodate splicing cassettes and can be installed in any network distributor with 482.6 mm (19") accommodation and used as a fibre-optic termination or distributor. The rear section of the splicing b The telescopic pull-out provides optimum access to the splicing cassettes and cable clamp The variable cassette fixture permits twist-proof installation of all standard splicing cassettes The security lock fitted at the front protects against unauthorised

Product Detail

New items

CCE-A1112XXX1/BK, HellermannTyton Connectivity

The HellermannTyton customer connection enclosure (CCE) supports a maximum 2 x SC simplex or LC duplex adaptors. The closure is manufactured from UV stable ABS with a hinged lid which locks in the open position to allow for quick and clear access to the internal fibre. Maximum capacity is 2 x SC simplex or LC duplex adaptors Fibre management for 4 x 3A splices Integral positive fibre management and storage capacity 6 inbound & outbound access points (2 x 6.0 - 8.5 mm and 1 x 2.5 - 6.5 mm) Through the wall capability Loop through facility Tamper proof fitting, captive screw and nut IP55 rated

Product Detail

New items

H82050E0001, Telegartner

STX Mounting Rail Distributors The STX Mounting Rail Distributors are available for either loose-tube, mini-breakout or breakout cables of up to 12 fibers using splice techniques or for fiber optic adaptors using pre-assembled fiber optic links. Fiber optic adaptor types including ST, SC Duplex, SC-RJ, LC Duplex, E2000 and E2000 Compact can be installed in the interchangeable front panel. The installer can flexibly feed the cables from three directions while easily maintaining minimum bending radii using a storage reserve with additional cable retainers. Versions with pre-assembled adaptors are already available for mini-breakout and breakout cables. For loose-tube cables, the distributors are supplied with ready-to-splice, coloured pigtails and cable strain relief. For generic cabling in control cabinets, Telegärtner offers outlets and distributors which can be mounted directly next to one another on the mounting rail. They form the ideal connection between the arriving installation lines and the wiring inside the control cabinet. The components can be quickly and easily mounted on conventional TH 35 rails by simply clicking them in place.

Product Detail