What are the shipping charges for products like Shaft Collars?

Yes. We keep updating our stock frequently and if a product like Shaft Collars is not in stock then we will let you know.

How do I contact the Customer Support Team?

Yes. We keep updating our stock frequently and if a product like Shaft Collars is not in stock then we will let you know.

Where are your products like Shaft Collars manufactured?

Yes. We keep updating our stock frequently and if a product like Shaft Collars is not in stock then we will let you know.

Do you offer any discounts on bulk orders of products like Shaft Collars?

Yes. We keep updating our stock frequently and if a product like Shaft Collars is not in stock then we will let you know.

How long will it take to receive the order that I placed for Shaft Collars?

Yes. We keep updating our stock frequently and if a product like Shaft Collars is not in stock then we will let you know.

Are your products Shaft Collars in stock?

Yes. We keep updating our stock frequently and if a product like Shaft Collars is not in stock then we will let you know.

Shaft Collars | Locking Collars | Screw Collars | Metal Collars

New items

046102050, Huco

Stainless Steel Collars Simple installation and adjustment Clamp grips shaft without leaving score marks Stainless steel for extra corrosion resistance Hugs the shaft with all round grip Effective on hardened or plain shafts

Product Detail

New items

ENCL45-20MM-A, Ruland

Ruland ENCL45-20MM-A is a one-piece shaft collar with a 20mm bore, 45mm OD, and 10mm width. The thin line design reduces weight and allows for use in confined spaces. It has the clamp style benefits of not marring the shaft, easy removability, and indefinite adjustability while commonly being used for guiding, spacing, stopping, mounting, and component alignment. Equipment manufacturers benefit from the tightly controlled face to bore perpendicularity (TIR of ≤ .002"). Perpendicularity is critical for alignment when the shaft collar is used as a load bearing face, mechanical stop, or for mounting components such as gears or bearings. Proprietary processes have been developed by Ruland to maintain superior fit, finish, and holding power.

Product Detail

New items

MCL-5-SS, Ruland

Stainless Steel Collars One and two piece collars in stainless steel Collars do not score the shaft Easily installed and adjusted Dimensions Clamp Type Bore (mm) OD (mm) Width (mm) Clamp Screw Tightening Torque (Nm) 1 3 16 9 M3 x 8 1.1 2 4 16 9 M3 x 8 1.1 3 5 16 9 M3 x 8 1.1 4 6 16 9 M3 x 8 1.1 5 8 18 9 M3 x 8 1.1 6 10 24 9 M3 x 8 1.1 7 12 28 11 M4 x 12 2.5 8 14 30 11 M4 x 12 2.5 9 15 34 13 M5 x 16 5.4 10 16 34 13 M5 x 16 5.4 11 20 40 15 M6 x 16 9.6 12 22 42 15 M6 x 16 9.6 13 25 45 15 M6 x 16 9.6 14 28 48 15 M6 x 16 9.6 15 30 54 15 M6 x 18 9.6 16 35 57 15 M6 x 18 9.6 17 40 60 15 M6 x 18 9.6 18 50 78 19 M8 x 25 23 Ruland MCL-5-SS is a one-piece shaft collar with a 5mm bore, 16mm OD, and 9mm width. The clamp style design does not mar the shaft, is easy to remove, and is indefinitely adjustable. It is commonly used for guiding, spacing, stopping, mounting, and component alignment. Equipment manufacturers benefit from the tightly controlled face to bore perpendicularity (TIR of ≤ .05mm). Perpendicularity is critical for alignment when the shaft collar is used as a load bearing face, mechanical stop, or for mounting components such as gears or bearings. Proprietary processes have been developed by Ruland to maintain superior fit, finish, and holding power. MCL-5-SS is stamped with the Ruland name and bore size for ease of identification.

Product Detail

New items

046101006, Huco

Mild Steel Collars Simple installation and adjustment Clamp grips shaft without leaving score marks Black oxide finish Hugs the shaft with all round grip Effective on hardened or plain shafts

Product Detail

New items

MSP-16-P, Ruland

Plastic Collars One and two piece collars in plastic Collars do not score the shaft Easily installed and adjusted Dimensions Clamp Type Bore (mm) OD (mm) Width (mm) Clamp Screw Tightening Torque (Nm) 3 5 16 9 M3 x 8 2.1 4 6 16 9 M3 x 8 2.1 5 8 18 9 M3 x 8 2.1 6 10 24 9 M3 x 8 2.1 7 12 28 11 M4 x 12 4.6 8 14 30 11 M4 x 12 4.6 9 15 34 13 M5 x 16 9.5 10 16 34 13 M5 x 16 9.5 11 20 40 15 M6 x 16 16 12 22 42 15 M6 x 16 16 13 25 45 15 M6 x 16 16 14 28 48 15 M6 x 16 16 15 30 54 15 M6 x 18 16

Product Detail

New items

ENSP30-16MM-A, Ruland

Ruland ENSP30-16MM-A is a two-piece shaft collar with a 16mm bore, 30mm OD, and 8mm width. The thin line design reduces weight and allows for use in confined spaces. It has the clamp style benefits of not marring the shaft, easy removability, and indefinite adjustability while commonly being used for guiding, spacing, stopping, mounting, and component alignment. Equipment manufacturers benefit from the tightly controlled face to bore perpendicularity (TIR of ≤ .002"). Perpendicularity is critical for alignment when the shaft collar is used as a load bearing face, mechanical stop, or for mounting components such as gears or bearings. Proprietary processes have been developed by Ruland to maintain superior fit, finish, and holding power.

Product Detail

New items

ENSP45-25MM-SS, Ruland

Ruland ENSP45-25MM-SS is a two-piece shaft collar with a 25mm bore, 45mm OD, and 10mm width. The thin line design reduces weight and allows for use in confined spaces. It has the clamp style benefits of not marring the shaft, easy removability, and indefinite adjustability while commonly being used for guiding, spacing, stopping, mounting, and component alignment. Equipment manufacturers benefit from the tightly controlled face to bore perpendicularity (TIR of ≤ .002"). Perpendicularity is critical for alignment when the shaft collar is used as a load bearing face, mechanical stop, or for mounting components such as gears or bearings. Proprietary processes have been developed by Ruland to maintain superior fit, finish, and holding power.

Product Detail

New items

MSP-16-SS, Ruland

Ruland MSP-16-SS is a two-piece shaft collar with a 16mm bore, 34mm OD, and 13mm width. The clamp style design does not mar the shaft, is easy to remove, and is indefinitely adjustable. MSP-16-SS is commonly used for guiding, spacing, stopping, mounting, and component alignment. Equipment manufacturers benefit from the tightly controlled face to bore perpendicularity of Ruland shaft collars, TIR of ≤ 05mm. Perpendicularity is critical for alignment when the shaft collar is used as a load bearing face, mechanical stop, or for mounting components such as gears or bearings. Proprietary processes have been developed by Ruland to maintain superior fit, finish, and holding power.

Product Detail

New items

ENCL45-25MM-SS, Ruland

Ruland ENSP20-10MM-A is a two-piece shaft collar with a 10mm bore, 20mm OD, and 5.5mm width. The thin line design reduces weight and allows for use in confined spaces. It has the clamp style benefits of not marring the shaft, easy removability, and indefinite adjustability while commonly being used for guiding, spacing, stopping, mounting, and component alignment. Equipment manufacturers benefit from the tightly controlled face to bore perpendicularity (TIR of ≤ .002"). Perpendicularity is critical for alignment when the shaft collar is used as a load bearing face, mechanical stop, or for mounting components such as gears or bearings. Proprietary processes have been developed by Ruland to maintain superior fit, finish, and holding power.

Product Detail

New items

OF-MSP-16-F, Ruland

Ruland OF-MSP-16-F is a two-piece shaft collar with 16mm bore, 34mm OD, and 13mm width. OF-MSP-16-F has OD flats and tapped holes for mounting shaft collars to each other or adjacent components. The clamp style design does not mar the shaft, is easy to remove, and is indefinitely adjustable. OF-MSP-16-F is commonly used for guiding, spacing, stopping, mounting, and component alignment. Equipment manufacturers benefit from the tightly controlled face to bore perpendicularity (TIR of ≤ .05mm). Perpendicularity is critical for alignment when the shaft collar is used as a load bearing face, mechanical stop, or for mounting components such as gears or bearings. Proprietary processes have been developed by Ruland to maintain superior fit, finish, and holding power.

Product Detail

New items

MCL-4-A, Ruland

Aluminium Collars Clamp shaft collars do not mar the shaft, are easy to remove and are indefinitely adjustable. They are commonly used for guiding, spacing, stopping, mounting and component alignment. Equipment manufacturers benefit from the tightly controlled face to bore perpendicularity of Ruland shaft collars (TIR of ≤ 0.002" or 0.05 mm). Perpendicularity is critical for alignment when the shaft collar is used as a load bearing face, mechanical stop or for mounting components such as gears or bearings. Proprietary processes have been developed by Ruland to maintain superior fit, finish, and holding power. Ruland stamps the name and bore size on every shaft collar for ease of identification. 2 piece styles are mated throughout the manufacturing process for proper fit and alignment. Forged screws test beyond DIN 912 12.9 to ensure maximum holding power. All shaft collars are machined from solid bar stock to a fine burr free finish and sourced exclusively from North American mills. Ruland uses high grade 2024 aluminium for increased screw seating torque. All products are RoHS2 and REACH compliant and manufactured in our Marlborough, MA factory. One and two piece collars in aluminium Collars do not score the shaft Easily installed and adjusted Dimensions Clamp Type Bore (mm) OD (mm) Width (mm) Clamp Screw Tightening Torque (Nm) RS Stock No. 1 3 16 9 M3 x 8 2.1 435-0898 (1 Piece) 2 4 16 9 M3 x 8 2.1 435-0905 (1 Piece); 435-1021 (2 Piece) 3 5 16 9 M3 x 8 2.1 435-0911 (1 Piece); 435-1043 (2 Piece) 4 6 16 9 M3 x 8 2.1 435-0927 (1 Piece); 435-1059 (2 Piece) 5 8 18 9 M3 x 8 2.1 435-0933 (1 Piece); 435-1065 (2 Piece) 6 10 24 9 M3 x 8 2.1 435-0949 (1 Piece); 435-1071 (2 Piece) 7 12 28 11 M4 x 12 4.6 435-0955 (1 Piece); 435-1087 (2 Piece) 10 16 34 13 M5 x 16 9.5 435-0977 (1 Piece); 435-1093 (2 Piece) 11 20 40 15 M6 x 16 16 435-0983 (1 Piece); 435-1100 (2 Piece) 13 25 45 15 ...

Product Detail

New items

MCL-40-F, Ruland

Mild Steel Collars One and two piece collars in mild steel with corrosion-resistant black finish Collars do not score the shaft Easily installed and adjusted Dimensions Clamp Type Bore (mm) OD (mm) Width (mm) Clamp Screw Tightening Torque (Nm) 2 4 16 9 M3 x 8 2.1 3 5 16 9 M3 x 8 2.1 4 6 16 9 M3 x 8 2.1 5 8 18 9 M3 x 8 2.1 6 10 24 9 M3 x 8 2.1 7 12 28 11 M4 x 12 4.6 8 14 30 11 M4 x 12 4.6 9 15 34 13 M5 x 16 9.5 10 16 34 13 M5 x 16 9.5 11 20 40 15 M6 x 16 16 12 22 42 15 M6 x 16 16 13 25 45 15 M6 x 16 16 14 28 48 15 M6 x 16 16 15 30 54 15 M6 x 18 16 16 35 57 15 M6 x 18 16 17 40 60 15 M6 x 18 16 18 50 78 19 M8 x 25 39 Ruland MCL-40-F is a one-piece shaft collar with a 40mm bore, 60mm OD, and 15mm width. The clamp style design does not mar the shaft, is easy to remove, and is indefinitely adjustable. It is commonly used for guiding, spacing, stopping, mounting, and component alignment. Equipment manufacturers benefit from the tightly controlled face to bore perpendicularity (TIR of ≤ .05mm). Perpendicularity is critical for alignment when the shaft collar is used as a load bearing face, mechanical stop, or for mounting components such as gears or bearings. Proprietary processes have been developed by Ruland to maintain superior fit, finish, and holding power. MCL-40-F is stamped with the Ruland name and bore size for ease of identification.

Product Detail