Products Found: 9
Showing Results For: Temperature Control Modules
Temperature Control Modules
FILTERS
Filters
Enrgtech #
Manufacturer Part No
Name
Availability
Price
Rating
703571(20258x)/64 (PROFIBUS-DP), Jumo
27 In Stock
Check Stock & Lead Times Packaging Options
10 +
£ 212.29
5 +
£ 219.13
1 +
£ 228.26
Jumo
703570(75/80/85)-1-0, Jumo
88 In Stock
Check Stock & Lead Times Packaging Options
10 +
£ 64.89
5 +
£ 66.34
1 +
£ 68.42
Omron
E53-CNH03N2, Omron
2 In Stock
Check Stock & Lead Times Packaging Options
10 +
£ 58.77
5 +
£ 60.66
1 +
£ 63.19
Jumo
703564/2-23, Jumo
5 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 332.96
5 +
£ 319.66
10 +
£ 309.65
703571(20258x)/17 (2 PhotoMOS-Relais), Jumo
94 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 35.75
5 +
£ 34.31
10 +
£ 33.25
Omron
E53-EN01, Omron
103 In Stock
Check Stock & Lead Times Packaging Options
703571(20258x)/54 (RS422/485 Modbus RTU), Jumo
22 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 83.84
5 +
£ 80.49
10 +
£ 77.99
703571(20258x)/11 (Relais (Wechsler)), Jumo
56 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 27.93
5 +
£ 26.81
10 +
£ 25.96
703571(20258x)/13 (Halbleiterrelais 230 V, 1 A), Jumo
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 31.29
5 +
£ 30.04
10 +
£ 29.10
Showing
1 -
New Items
New items
703564/2-23, Jumo
ER8/EL8 - External Output Module
The external module ER8/EL8 expands controller and chart recorder by eight relay outputs (ER8) or logic outputs (EL8). The functions of the outputs are defined in the instrument that is connected, or via the setup program. Communication takes place through the serial interface.
External relay / logic modules for:
- DICON 40x/50x
- DICON touch
- IMAGO500
- Logoline 500d
- Logoprint 500
Module output type:
- ER8 Relay Module 3 A/250 V, 110-240 V (stock-no.:
823-9896
)
- ER8 Relay Module 3 A/250 V, 20-53 V (stock-no.:
823-9899
)
- EL8 Logic Module 12 V/20 mA, 110-240 V (stock-no.:
823-9893
)
LED status indicators
Configuration with DIP switched
Serial interface
Screw terminals
DIN Rail mounting
IP20 protection
New items
E53-EN01, Omron
Accessories for E5EN and E5AN modules
Omron E5N Range
ON/OFF and PID control methods
Operating Temperature Range: -10°C to +55°C
0-50mV linear input
IP66/NEMA4 front fascia
CE marked in compliance to relevant European Directives
New items
703570(75/80/85)-1-0, Jumo
IMAGO 500 - Multi-channel controller
Process and program controller with 2 channels
Brilliant 5" colour display with 27 colours
Freely configurable screen masks
50 programs with 1000 sections, dynamically managed
16 limit comparators
Sampling time from 50 ms
Self-optimisation with vibration and step response method
Input and output modules and interface modules can be retrofitted
Also available PC interface including adapter
288-724
Analogue inputs:
Thermocouple, resistance thermometer, unit signals
Binary inputs:
6 volt-free inputs
Analogue output:
0 / 2 to 10 V or 0 / 4 to 20 mA
Relay output:
2 nc 250 V AC 3 A
Controller type:
Two-position controller, three-point controller, three-point step controller, continuous controller with integrated position controller
Controller structure:
P / PD / PI / PID / I
Screen:
5", 320 x 240 pixels, 27 colours
Power supply:
110 to 240 V AC (+10/-15%), 48 to 63 Hz
Frequency:
48 to 63 Hz
Power consumption:
max. 30 VA
Electrical connection:
Screw-in terminals
Housing type:
Housing and rear wall from metal
Front frame:
Plastic UL 94 V0
Front frame dimensions:
144 x 130 mm
Installation depth:
170 mm
Panel cut-out:
92 x 92 mm
Weight:
approx. 1400 g (fully equipped)
Usage position:
Horizontal
Protection class:
IP65 front, IP20 rear
Ambient temperature:
-5°C → +50°C
Approvals
UL
New items
E53-CNH03N2, Omron
Accessories for E5CN Controllers
Plug-in modular accessory cards for the E5CN "policeman" range of temperature controllers
Note
These option modules
cannot
be used with E5CN 11-pin plug-in models.
Omron E5N Range
ON/OFF and PID control methods
Operating Temperature Range: -10°C to +55°C
0-50mV linear input
IP66/NEMA4 front fascia
CE marked in compliance to relevant European Directives
New items
703571(20258x)/64 (PROFIBUS-DP), Jumo
DICON touch - Process- and Program Controller Accessories
The DICON touch is a two-channel universal process and program controller that displays information using a vibrant TFT colour graphics display. The device is operated intuitively by touch.
Both control channels use the tried-and-tested JUMO control algorithm with two possible optimization options. These enable a simple and highly-accurate startup. It enables multiple zone control, cascade control, or other complex control tasks.
4 analog universal inputs and up to 8 external inputs can record a variety of physical measured values with high precision. The actuators can be controlled directly in the device with either an analog or digital setup. These can be expanded further through external digital outputs. Interfaces such as Modbus, PROFIBUS, or Ethernet with web server can be used for the communication with higher-order systems.
An individual process screen can be created by using the configuration software. Using the recording extra-code important analog and digital process values can be saved so that they are tamper-proof, so that they can be graphically visualized, and so that they can be exported via interface or USB-stick in a tamper-proof fashion to the PC.
The configuration software ensures that the process controller can be easily programmed, that math or logical coherences can be described, and that customer-specific linearization can be created. In addition, tools for simulating external signals or control paths are included. These tools can also record for the duration of the startup.
A comprehensive alarm and limit-value concept as well as a flexible digital signal administration complete the "all-in-one" device.
Accessories for DICON touch controller
- Module cards input/output
- Module cards communication
- USB-Stick 2.0 2GB
New items
703571(20258x)/17 (2 PhotoMOS-Relais), Jumo
DICON touch - Process- and Program Controller Accessories
The DICON touch is a two-channel universal process and program controller that displays information using a vibrant TFT colour graphics display. The device is operated intuitively by touch.
Both control channels use the tried-and-tested JUMO control algorithm with two possible optimization options. These enable a simple and highly-accurate startup. It enables multiple zone control, cascade control, or other complex control tasks.
4 analog universal inputs and up to 8 external inputs can record a variety of physical measured values with high precision. The actuators can be controlled directly in the device with either an analog or digital setup. These can be expanded further through external digital outputs. Interfaces such as Modbus, PROFIBUS, or Ethernet with web server can be used for the communication with higher-order systems.
An individual process screen can be created by using the configuration software. Using the recording extra-code important analog and digital process values can be saved so that they are tamper-proof, so that they can be graphically visualized, and so that they can be exported via interface or USB-stick in a tamper-proof fashion to the PC.
The configuration software ensures that the process controller can be easily programmed, that math or logical coherences can be described, and that customer-specific linearization can be created. In addition, tools for simulating external signals or control paths are included. These tools can also record for the duration of the startup.
A comprehensive alarm and limit-value concept as well as a flexible digital signal administration complete the "all-in-one" device.
Accessories for DICON touch controller
- Module cards input/output
- Module cards communication
- USB-Stick 2.0 2GB
New items
703571(20258x)/13 (Halbleiterrelais 230 V, 1 A), Jumo
DICON touch - Process- and Program Controller Accessories
The DICON touch is a two-channel universal process and program controller that displays information using a vibrant TFT colour graphics display. The device is operated intuitively by touch.
Both control channels use the tried-and-tested JUMO control algorithm with two possible optimization options. These enable a simple and highly-accurate startup. It enables multiple zone control, cascade control, or other complex control tasks.
4 analog universal inputs and up to 8 external inputs can record a variety of physical measured values with high precision. The actuators can be controlled directly in the device with either an analog or digital setup. These can be expanded further through external digital outputs. Interfaces such as Modbus, PROFIBUS, or Ethernet with web server can be used for the communication with higher-order systems.
An individual process screen can be created by using the configuration software. Using the recording extra-code important analog and digital process values can be saved so that they are tamper-proof, so that they can be graphically visualized, and so that they can be exported via interface or USB-stick in a tamper-proof fashion to the PC.
The configuration software ensures that the process controller can be easily programmed, that math or logical coherences can be described, and that customer-specific linearization can be created. In addition, tools for simulating external signals or control paths are included. These tools can also record for the duration of the startup.
A comprehensive alarm and limit-value concept as well as a flexible digital signal administration complete the "all-in-one" device.
Accessories for DICON touch controller
- Module cards input/output
- Module cards communication
- USB-Stick 2.0 2GB
New items
703571(20258x)/54 (RS422/485 Modbus RTU), Jumo
DICON touch - Process- and Program Controller Accessories
The DICON touch is a two-channel universal process and program controller that displays information using a vibrant TFT colour graphics display. The device is operated intuitively by touch.
Both control channels use the tried-and-tested JUMO control algorithm with two possible optimization options. These enable a simple and highly-accurate startup. It enables multiple zone control, cascade control, or other complex control tasks.
4 analog universal inputs and up to 8 external inputs can record a variety of physical measured values with high precision. The actuators can be controlled directly in the device with either an analog or digital setup. These can be expanded further through external digital outputs. Interfaces such as Modbus, PROFIBUS, or Ethernet with web server can be used for the communication with higher-order systems.
An individual process screen can be created by using the configuration software. Using the recording extra-code important analog and digital process values can be saved so that they are tamper-proof, so that they can be graphically visualized, and so that they can be exported via interface or USB-stick in a tamper-proof fashion to the PC.
The configuration software ensures that the process controller can be easily programmed, that math or logical coherences can be described, and that customer-specific linearization can be created. In addition, tools for simulating external signals or control paths are included. These tools can also record for the duration of the startup.
A comprehensive alarm and limit-value concept as well as a flexible digital signal administration complete the "all-in-one" device.
Accessories for DICON touch controller
- Module cards input/output
- Module cards communication
- USB-Stick 2.0 2GB
New items
703571(20258x)/11 (Relais (Wechsler)), Jumo
DICON touch - Process- and Program Controller Accessories
The DICON touch is a two-channel universal process and program controller that displays information using a vibrant TFT colour graphics display. The device is operated intuitively by touch.
Both control channels use the tried-and-tested JUMO control algorithm with two possible optimization options. These enable a simple and highly-accurate startup. It enables multiple zone control, cascade control, or other complex control tasks.
4 analog universal inputs and up to 8 external inputs can record a variety of physical measured values with high precision. The actuators can be controlled directly in the device with either an analog or digital setup. These can be expanded further through external digital outputs. Interfaces such as Modbus, PROFIBUS, or Ethernet with web server can be used for the communication with higher-order systems.
An individual process screen can be created by using the configuration software. Using the recording extra-code important analog and digital process values can be saved so that they are tamper-proof, so that they can be graphically visualized, and so that they can be exported via interface or USB-stick in a tamper-proof fashion to the PC.
The configuration software ensures that the process controller can be easily programmed, that math or logical coherences can be described, and that customer-specific linearization can be created. In addition, tools for simulating external signals or control paths are included. These tools can also record for the duration of the startup.
A comprehensive alarm and limit-value concept as well as a flexible digital signal administration complete the "all-in-one" device.
Accessories for DICON touch controller
- Module cards input/output
- Module cards communication
- USB-Stick 2.0 2GB