What are the shipping charges for products like Edge Protection Sensors?

Yes. We keep updating our stock frequently and if a product like Edge Protection Sensors is not in stock then we will let you know.

How do I contact the Customer Support Team?

Yes. We keep updating our stock frequently and if a product like Edge Protection Sensors is not in stock then we will let you know.

Where are your products like Edge Protection Sensors manufactured?

Yes. We keep updating our stock frequently and if a product like Edge Protection Sensors is not in stock then we will let you know.

Do you offer any discounts on bulk orders of products like Edge Protection Sensors?

Yes. We keep updating our stock frequently and if a product like Edge Protection Sensors is not in stock then we will let you know.

How long will it take to receive the order that I placed for Edge Protection Sensors?

Yes. We keep updating our stock frequently and if a product like Edge Protection Sensors is not in stock then we will let you know.

Are your products Edge Protection Sensors in stock?

Yes. We keep updating our stock frequently and if a product like Edge Protection Sensors is not in stock then we will let you know.

Edge Protection Sensors | Safety Edges | Pressure Safety Edge Sensor | Sensors

New items

440F-E000039RS, Allen Bradley Guardmaster

Safedge Profiles The Safedge pressure sensitive system is supplied in two popular profiles, with cushion factor over travel distances of 5mm and 19mm. The cushion factor is the distance the profile can be depressed after a signal has been generated. It is mounted on an aluminium C rail (included) and is supplied in 1, 1.5 and 2m lengths that may be cut and joined in series or parallel to support a wide range of industrial applications such as power operated doors, guided vehicles and moving machinery beds. The Safedge profile uses a combination of non-conductive rubber and flexible wire cored conductive rubber bonded together enabling it to return to its original shape even after repeated compressions. It has no rigid internal parts to damage the rubber profile or cause fatigue failures after prolonged use. The multi-stranded copper wire core throughout the length of the strip also insures that there are no problems of resistance build up on long lengths. A range of accessories for end termination and 90° active corner joints are also available. 2 different profile designs Conductive rubber technology Available in 1m, 1.5m or 2m lengths Aluminium mounting rail The system has a bend radius of 200mm Rubber boot optional Active corners IP65 protection Note These Safedge profiles are supplied part assembled. The series terminating resistor and associated end closing cap are not attached to the profile but are supplied separately in a bag. This allows the profile to be cut to the appropriate length before completing the assembly by inserting the resistor and gluing the end cap in place using industrial cyanoacrylate adhesive. Safety Edge

Product Detail

New items

440F-E000031RS, Allen Bradley Guardmaster

Safedge Profiles The Safedge pressure sensitive system is supplied in two popular profiles, with cushion factor over travel distances of 5mm and 19mm. The cushion factor is the distance the profile can be depressed after a signal has been generated. It is mounted on an aluminium C rail (included) and is supplied in 1, 1.5 and 2m lengths that may be cut and joined in series or parallel to support a wide range of industrial applications such as power operated doors, guided vehicles and moving machinery beds. The Safedge profile uses a combination of non-conductive rubber and flexible wire cored conductive rubber bonded together enabling it to return to its original shape even after repeated compressions. It has no rigid internal parts to damage the rubber profile or cause fatigue failures after prolonged use. The multi-stranded copper wire core throughout the length of the strip also insures that there are no problems of resistance build up on long lengths. A range of accessories for end termination and 90° active corner joints are also available. 2 different profile designs Conductive rubber technology Available in 1m, 1.5m or 2m lengths Aluminium mounting rail The system has a bend radius of 200mm Rubber boot optional Active corners IP65 protection Note These Safedge profiles are supplied part assembled. The series terminating resistor and associated end closing cap are not attached to the profile but are supplied separately in a bag. This allows the profile to be cut to the appropriate length before completing the assembly by inserting the resistor and gluing the end cap in place using industrial cyanoacrylate adhesive. Safety Edge

Product Detail

New items

440F-E000027RS, Allen Bradley Guardmaster

Safedge Profiles The Safedge pressure sensitive system is supplied in two popular profiles, with cushion factor over travel distances of 5mm and 19mm. The cushion factor is the distance the profile can be depressed after a signal has been generated. It is mounted on an aluminium C rail (included) and is supplied in 1, 1.5 and 2m lengths that may be cut and joined in series or parallel to support a wide range of industrial applications such as power operated doors, guided vehicles and moving machinery beds. The Safedge profile uses a combination of non-conductive rubber and flexible wire cored conductive rubber bonded together enabling it to return to its original shape even after repeated compressions. It has no rigid internal parts to damage the rubber profile or cause fatigue failures after prolonged use. The multi-stranded copper wire core throughout the length of the strip also insures that there are no problems of resistance build up on long lengths. A range of accessories for end termination and 90° active corner joints are also available. 2 different profile designs Conductive rubber technology Available in 1m, 1.5m or 2m lengths Aluminium mounting rail The system has a bend radius of 200mm Rubber boot optional Active corners IP65 protection Note These Safedge profiles are supplied part assembled. The series terminating resistor and associated end closing cap are not attached to the profile but are supplied separately in a bag. This allows the profile to be cut to the appropriate length before completing the assembly by inserting the resistor and gluing the end cap in place using industrial cyanoacrylate adhesive. Safety Edge

Product Detail

New items

440F-E000026RS, Allen Bradley Guardmaster

Safedge Profiles The Safedge pressure sensitive system is supplied in two popular profiles, with cushion factor over travel distances of 5mm and 19mm. The cushion factor is the distance the profile can be depressed after a signal has been generated. It is mounted on an aluminium C rail (included) and is supplied in 1, 1.5 and 2m lengths that may be cut and joined in series or parallel to support a wide range of industrial applications such as power operated doors, guided vehicles and moving machinery beds. The Safedge profile uses a combination of non-conductive rubber and flexible wire cored conductive rubber bonded together enabling it to return to its original shape even after repeated compressions. It has no rigid internal parts to damage the rubber profile or cause fatigue failures after prolonged use. The multi-stranded copper wire core throughout the length of the strip also insures that there are no problems of resistance build up on long lengths. A range of accessories for end termination and 90° active corner joints are also available. 2 different profile designs Conductive rubber technology Available in 1m, 1.5m or 2m lengths Aluminium mounting rail The system has a bend radius of 200mm Rubber boot optional Active corners IP65 protection Note These Safedge profiles are supplied part assembled. The series terminating resistor and associated end closing cap are not attached to the profile but are supplied separately in a bag. This allows the profile to be cut to the appropriate length before completing the assembly by inserting the resistor and gluing the end cap in place using industrial cyanoacrylate adhesive. Safety Edge

Product Detail

New items

440F-E000025RS, Allen Bradley Guardmaster

Safedge Profiles The Safedge pressure sensitive system is supplied in two popular profiles, with cushion factor over travel distances of 5mm and 19mm. The cushion factor is the distance the profile can be depressed after a signal has been generated. It is mounted on an aluminium C rail (included) and is supplied in 1, 1.5 and 2m lengths that may be cut and joined in series or parallel to support a wide range of industrial applications such as power operated doors, guided vehicles and moving machinery beds. The Safedge profile uses a combination of non-conductive rubber and flexible wire cored conductive rubber bonded together enabling it to return to its original shape even after repeated compressions. It has no rigid internal parts to damage the rubber profile or cause fatigue failures after prolonged use. The multi-stranded copper wire core throughout the length of the strip also insures that there are no problems of resistance build up on long lengths. A range of accessories for end termination and 90° active corner joints are also available. 2 different profile designs Conductive rubber technology Available in 1m, 1.5m or 2m lengths Aluminium mounting rail The system has a bend radius of 200mm Rubber boot optional Active corners IP65 protection Note These Safedge profiles are supplied part assembled. The series terminating resistor and associated end closing cap are not attached to the profile but are supplied separately in a bag. This allows the profile to be cut to the appropriate length before completing the assembly by inserting the resistor and gluing the end cap in place using industrial cyanoacrylate adhesive. Safety Edge

Product Detail

New items

440F-E000034RS, Allen Bradley Guardmaster

Safedge Profiles The Safedge pressure sensitive system is supplied in two popular profiles, with cushion factor over travel distances of 5mm and 19mm. The cushion factor is the distance the profile can be depressed after a signal has been generated. It is mounted on an aluminium C rail (included) and is supplied in 1, 1.5 and 2m lengths that may be cut and joined in series or parallel to support a wide range of industrial applications such as power operated doors, guided vehicles and moving machinery beds. The Safedge profile uses a combination of non-conductive rubber and flexible wire cored conductive rubber bonded together enabling it to return to its original shape even after repeated compressions. It has no rigid internal parts to damage the rubber profile or cause fatigue failures after prolonged use. The multi-stranded copper wire core throughout the length of the strip also insures that there are no problems of resistance build up on long lengths. A range of accessories for end termination and 90° active corner joints are also available. 2 different profile designs Conductive rubber technology Available in 1m, 1.5m or 2m lengths Aluminium mounting rail The system has a bend radius of 200mm Rubber boot optional Active corners IP65 protection Note These Safedge profiles are supplied part assembled. The series terminating resistor and associated end closing cap are not attached to the profile but are supplied separately in a bag. This allows the profile to be cut to the appropriate length before completing the assembly by inserting the resistor and gluing the end cap in place using industrial cyanoacrylate adhesive. Safety Edge

Product Detail

New items

440F-E000030RS, Allen Bradley Guardmaster

Safedge Profiles The Safedge pressure sensitive system is supplied in two popular profiles, with cushion factor over travel distances of 5mm and 19mm. The cushion factor is the distance the profile can be depressed after a signal has been generated. It is mounted on an aluminium C rail (included) and is supplied in 1, 1.5 and 2m lengths that may be cut and joined in series or parallel to support a wide range of industrial applications such as power operated doors, guided vehicles and moving machinery beds. The Safedge profile uses a combination of non-conductive rubber and flexible wire cored conductive rubber bonded together enabling it to return to its original shape even after repeated compressions. It has no rigid internal parts to damage the rubber profile or cause fatigue failures after prolonged use. The multi-stranded copper wire core throughout the length of the strip also insures that there are no problems of resistance build up on long lengths. A range of accessories for end termination and 90° active corner joints are also available. 2 different profile designs Conductive rubber technology Available in 1m, 1.5m or 2m lengths Aluminium mounting rail The system has a bend radius of 200mm Rubber boot optional Active corners IP65 protection Note These Safedge profiles are supplied part assembled. The series terminating resistor and associated end closing cap are not attached to the profile but are supplied separately in a bag. This allows the profile to be cut to the appropriate length before completing the assembly by inserting the resistor and gluing the end cap in place using industrial cyanoacrylate adhesive. Safety Edge

Product Detail

New items

440F-E000028RS, Allen Bradley Guardmaster

Safedge Profiles The Safedge pressure sensitive system is supplied in two popular profiles, with cushion factor over travel distances of 5mm and 19mm. The cushion factor is the distance the profile can be depressed after a signal has been generated. It is mounted on an aluminium C rail (included) and is supplied in 1, 1.5 and 2m lengths that may be cut and joined in series or parallel to support a wide range of industrial applications such as power operated doors, guided vehicles and moving machinery beds. The Safedge profile uses a combination of non-conductive rubber and flexible wire cored conductive rubber bonded together enabling it to return to its original shape even after repeated compressions. It has no rigid internal parts to damage the rubber profile or cause fatigue failures after prolonged use. The multi-stranded copper wire core throughout the length of the strip also insures that there are no problems of resistance build up on long lengths. A range of accessories for end termination and 90° active corner joints are also available. 2 different profile designs Conductive rubber technology Available in 1m, 1.5m or 2m lengths Aluminium mounting rail The system has a bend radius of 200mm Rubber boot optional Active corners IP65 protection Note These Safedge profiles are supplied part assembled. The series terminating resistor and associated end closing cap are not attached to the profile but are supplied separately in a bag. This allows the profile to be cut to the appropriate length before completing the assembly by inserting the resistor and gluing the end cap in place using industrial cyanoacrylate adhesive. Safety Edge

Product Detail

New items

440F-E000029RS, Allen Bradley Guardmaster

Safedge Profiles The Safedge pressure sensitive system is supplied in two popular profiles, with cushion factor over travel distances of 5mm and 19mm. The cushion factor is the distance the profile can be depressed after a signal has been generated. It is mounted on an aluminium C rail (included) and is supplied in 1, 1.5 and 2m lengths that may be cut and joined in series or parallel to support a wide range of industrial applications such as power operated doors, guided vehicles and moving machinery beds. The Safedge profile uses a combination of non-conductive rubber and flexible wire cored conductive rubber bonded together enabling it to return to its original shape even after repeated compressions. It has no rigid internal parts to damage the rubber profile or cause fatigue failures after prolonged use. The multi-stranded copper wire core throughout the length of the strip also insures that there are no problems of resistance build up on long lengths. A range of accessories for end termination and 90° active corner joints are also available. 2 different profile designs Conductive rubber technology Available in 1m, 1.5m or 2m lengths Aluminium mounting rail The system has a bend radius of 200mm Rubber boot optional Active corners IP65 protection Note These Safedge profiles are supplied part assembled. The series terminating resistor and associated end closing cap are not attached to the profile but are supplied separately in a bag. This allows the profile to be cut to the appropriate length before completing the assembly by inserting the resistor and gluing the end cap in place using industrial cyanoacrylate adhesive. Safety Edge

Product Detail

New items

440F-E000024RS, Allen Bradley Guardmaster

Safedge Profiles The Safedge pressure sensitive system is supplied in two popular profiles, with cushion factor over travel distances of 5mm and 19mm. The cushion factor is the distance the profile can be depressed after a signal has been generated. It is mounted on an aluminium C rail (included) and is supplied in 1, 1.5 and 2m lengths that may be cut and joined in series or parallel to support a wide range of industrial applications such as power operated doors, guided vehicles and moving machinery beds. The Safedge profile uses a combination of non-conductive rubber and flexible wire cored conductive rubber bonded together enabling it to return to its original shape even after repeated compressions. It has no rigid internal parts to damage the rubber profile or cause fatigue failures after prolonged use. The multi-stranded copper wire core throughout the length of the strip also insures that there are no problems of resistance build up on long lengths. A range of accessories for end termination and 90° active corner joints are also available. 2 different profile designs Conductive rubber technology Available in 1m, 1.5m or 2m lengths Aluminium mounting rail The system has a bend radius of 200mm Rubber boot optional Active corners IP65 protection Note These Safedge profiles are supplied part assembled. The series terminating resistor and associated end closing cap are not attached to the profile but are supplied separately in a bag. This allows the profile to be cut to the appropriate length before completing the assembly by inserting the resistor and gluing the end cap in place using industrial cyanoacrylate adhesive. Safety Edge

Product Detail

New items

440F-E000023RS, Allen Bradley Guardmaster

Safedge Profiles The Safedge pressure sensitive system is supplied in two popular profiles, with cushion factor over travel distances of 5mm and 19mm. The cushion factor is the distance the profile can be depressed after a signal has been generated. It is mounted on an aluminium C rail (included) and is supplied in 1, 1.5 and 2m lengths that may be cut and joined in series or parallel to support a wide range of industrial applications such as power operated doors, guided vehicles and moving machinery beds. The Safedge profile uses a combination of non-conductive rubber and flexible wire cored conductive rubber bonded together enabling it to return to its original shape even after repeated compressions. It has no rigid internal parts to damage the rubber profile or cause fatigue failures after prolonged use. The multi-stranded copper wire core throughout the length of the strip also insures that there are no problems of resistance build up on long lengths. A range of accessories for end termination and 90° active corner joints are also available. 2 different profile designs Conductive rubber technology Available in 1m, 1.5m or 2m lengths Aluminium mounting rail The system has a bend radius of 200mm Rubber boot optional Active corners IP65 protection Note These Safedge profiles are supplied part assembled. The series terminating resistor and associated end closing cap are not attached to the profile but are supplied separately in a bag. This allows the profile to be cut to the appropriate length before completing the assembly by inserting the resistor and gluing the end cap in place using industrial cyanoacrylate adhesive. Safety Edge

Product Detail

New items

440F-E000032RS, Allen Bradley Guardmaster

Safedge Profiles The Safedge pressure sensitive system is supplied in two popular profiles, with cushion factor over travel distances of 5mm and 19mm. The cushion factor is the distance the profile can be depressed after a signal has been generated. It is mounted on an aluminium C rail (included) and is supplied in 1, 1.5 and 2m lengths that may be cut and joined in series or parallel to support a wide range of industrial applications such as power operated doors, guided vehicles and moving machinery beds. The Safedge profile uses a combination of non-conductive rubber and flexible wire cored conductive rubber bonded together enabling it to return to its original shape even after repeated compressions. It has no rigid internal parts to damage the rubber profile or cause fatigue failures after prolonged use. The multi-stranded copper wire core throughout the length of the strip also insures that there are no problems of resistance build up on long lengths. A range of accessories for end termination and 90° active corner joints are also available. 2 different profile designs Conductive rubber technology Available in 1m, 1.5m or 2m lengths Aluminium mounting rail The system has a bend radius of 200mm Rubber boot optional Active corners IP65 protection Note These Safedge profiles are supplied part assembled. The series terminating resistor and associated end closing cap are not attached to the profile but are supplied separately in a bag. This allows the profile to be cut to the appropriate length before completing the assembly by inserting the resistor and gluing the end cap in place using industrial cyanoacrylate adhesive. Safety Edge

Product Detail