Flow Sensors & Indicators

Georg Fischer Flow Meters George Fischer’s range of variable area flowmeters provide accurate, reliable and cost effective way of measuring flow in both gases and liquids. Fitted with standard size cement sockets and a threaded joint for easy installation and demounting and a guide rod for sizes above DN50 to ensure the float remains stable and easy to read. Break-proof and corrosion-resistant Low pressure loss Suitable for liquids and gases Volume and % scale Install and remove radially with threaded joint Wide dovetail guide for easy fastening of limit switches Flow immediately visible with set-point indicators Orange-coloured PVDF float makes it easy to read the flow Fast connection with standardized cement socket

FS-10798E Series An easy to adjust flow switch suitable for use with water, oils and gases. Adjustment for fluid variants is infinite between 1.8 l/pm and 75.7 l/pm and is done simply using a flat bladed screwdriver. Once adjusted the adjustment screw can be locked using a set screw to prevent tampering or accidental adjustment. The FS-1078 pressure switch can be used in various applications including protecting against coolant flow failure and bearing lubricant loss. Features and Benefits Tamper-proof easy adjustment Readings repeat to within 1% of the max deviation SPDT 20 VA Switch 1/2” NPT ports Altech Flow Sensors & Switches

Flowline EchoPulse Accessories Comprehensive range of accessories for Flowline's successful EchoPulse series. Accessories include a variety Reducer bushings covering a range of Thread forms & diameters, ANSI flanges, indicators, enclosures & controllers. Thanks to the wide array of accessories on offer the EchoPulse Level Transmitter range can be used in an assortment of applications Flowline Sensors

Air & Gas Mass Flow Sensors 0-6SLPM The microbridge mass airflow sensor operates on the theory of heat transfer. Mass airflow is directed across a surface of a sensing element. Output voltage varies in proportion to the mass air or other gas flow through the inlet and outlet of the unit. Precision silicon micromachining Sensitive to low flows - 0.1sccm to 20SLPM Adaptable for use with higher flows Fast response time Analog output Low power consumption, 60mW Supply voltage; 8 to 15Vdc Repeatable response Response time: 1ms (typ) Laser trimmed interchangeability In-line printed circuit board terminals Standard 2.54mm mounting centres Accurate sensing of low pressure 0.001in to 4.0in H 2 O (0.003 to 10mbar) Manifold mounting Typical applications include: damper control for heating, ventilation and air conditioning systems; gas analyzers; low vacuum control; medical respirators and ventilators; oxygen concentrators; leak detection equipment; vent hoods; anaesthesia control; gas metering and gas chromatography Stock No. Maximum Over Pressure Operating Temperature Range Media Compatibility Signal Condition 621-1587 150psi -40 to +125°C - Unamplified 623-7911 150psi -40 to +125°C Dry Gas only Unamplified (mV) 623-7927 150psi -40 to +85°C Dry Gas only Amplified 623-7949 25psi -40 to +85°C Dry Gas only Amplified

SPI-N118/SPP-N118 Flow Meter The SPI-N118 and SPP-N118 flow meters are designed to work together with flow transducers equipped with analogue inputs (SPP-N118) or contact/electronic inputs (SPI-N118). The purpose of the flow meter is to measure the instantaneous flow value and record the total flow of media like liquids, gases or loose materials. The meters are encased in a tight, IP67 rated housing making them suitable for use in harsh environments. The SPI-N118 and SPP-N118 have built-in batcher function allowing the flow meters to be used in many industries such as food, pharmaceutical or paint and varnish. • 6-digit (13 mm) LED display • Flow meter, batcher, totaliser • 1 Pulse counting input & 3 control inputs (SPI-N118) • 1 Input 0/4-20 mA & 1 programmable function input (SPP-N118) • Analogue output: active or passive • RS485/Modbus RTU communication port • Configuration by IR remote controller ( 914-8502 ) or with free S-Config software via RS485 communication port • Display of instantaneous and the total flow values • Batching and counting of doses • Wall mounted, IP67 housing Simex Multi function Meters

Acrylic Flowmeters For many non-corrosive, low-pressure air, water and gas flow applications, it pays to use accurate instrumentation. The FR series provides highly repeatable results and is also durable and affordable.Durability is the result of precision-machined, 1 piece, acrylic-body blocks that can handle demanding projects and mounting panels. Plus, configuration and customisation options for scales, floats, fittings and control valves accommodate various applications, whether in the lab or the field.Features and Benefits Durable, 1 piece, clear acrylic construction Large scales are easy-to-read Valve with positive stop stays in place under pressure Rod guided float for stable measurements Fitting, valve and O-Ring options accommodate multiple applications Multiple connection options for easier installation Easy disassembly and assembly for maintenanceProduct Application Information Air sampling equipment aquaculture Desalinisation equipment Gas analysers Medical systems Photo processing equipment Water treatment and distribution systems PurgeNote Please ensure you have selected the correct gauge for air/gas or water.

Low Cost Polycarbonate Flow Meters MR3000 molded flow meters supplied with scales in LPM and SCFH for air, or CCM and GPH for water. Manufactured from high-impact polycarbonate, the MR3000 series can operate at pressures of 100 psig and temperatures of 150°F (65°C). These economically designed units provide high quality and accuracy when properly installed. The durability of the polycarbonate allows the flow meter to provide years of trouble-free service. Features and Benefits • High impact polycarbonate • High quality construction • Flow ranges: Air 50 CCM to 100 LPM, Water 4 CCM to 40 GPH • 10:1 turn direct reading scales Product Application Information For use with air and water. Ideally suited for OEM applications. Supplied with mounting brackets & built-in bezel