What are the shipping charges for products like DOL & Star Delta Starters?

Yes. We keep updating our stock frequently and if a product like DOL & Star Delta Starters is not in stock then we will let you know.

How do I contact the Customer Support Team?

Yes. We keep updating our stock frequently and if a product like DOL & Star Delta Starters is not in stock then we will let you know.

Where are your products like DOL & Star Delta Starters manufactured?

Yes. We keep updating our stock frequently and if a product like DOL & Star Delta Starters is not in stock then we will let you know.

Do you offer any discounts on bulk orders of products like DOL & Star Delta Starters?

Yes. We keep updating our stock frequently and if a product like DOL & Star Delta Starters is not in stock then we will let you know.

How long will it take to receive the order that I placed for DOL & Star Delta Starters?

Yes. We keep updating our stock frequently and if a product like DOL & Star Delta Starters is not in stock then we will let you know.

Are your products DOL & Star Delta Starters in stock?

Yes. We keep updating our stock frequently and if a product like DOL & Star Delta Starters is not in stock then we will let you know.

Star Delta Starter | Star Delta Connection | Delta Starter

New items

RS_725-5544, Lovato

Enclosed Direct-on-line Motor Starters A range of enclosed Direct-On-Line motor starters which combine high performance and low cost. The range includes options with and without isolator and support for motors from 5.5 kW to 11 kW. Moulded plastic case providing IP65 ingress protection Compliant with standards IEC/EN 60947-1 and IEC/EN 60947-4-1 Operating temperature range -25°C → +60°C Range available with and without isolator Options without isolator have space to mount additional 17.5mm wide module - such as a timer, level control or monitoring relay Note Each starter is supplied WITHOUT an overload, therefore an appropriate overload must be selected from the RF38 overload series - for example stock no. 685-1309 - to match the motor FLC.

Product Detail

New items

XDP5,5/ST(400V50HZ), Eaton

D.O.L - Steel Enclosure IP55 sheet steel enclosed starter complete with isolator for DOL applications to comply with IEE Regulations, 16th Edition on Isolation and Switching. AC-3 rated triple pole contactor with IP20 terminals and triple pole AC-3 rated switch disconnector with IP20 terminals fitted as standard. The disconnector has provision for up to 3 padlocks. The mushroom headed 'Stop' pushbutton is IP65 with the 'Start' pushbutton having an IP65 flush operator, both have IP20 terminals. Manufactured using readily available Moeller components which comply with the following specifications: isolator: IEC 943-3, pushbuttons: IEC 947-5-1, contactor: IEC 947-4-1. The enclosure is pre-wired to accept the Moeller Z00 or ZB thermal overloads which offer single phasing sensitivity to IEC 947-4. DOL starters comprise of an enclosure, switch disconnector, stop and start pushbuttons and a contactor. Overload relay is not supplied and must be ordered separately Fitted with 4x20mm and 2x25mm knockouts H184 x W184 x D184mm Note FLC figures quoted are maximum, other overload ratings can be used dependent on FLC rating.

Product Detail

New items

118539 | XDRP4/ST(400V50HZ,440V60HZ), Eaton

Reversing D.O.L - Steel Enclosure IP55 sheet steel (epoxy paint RAl 7032) enclosed starter complete with isolator for Reversing DOL applications to comply with IEE Regulations, 16th Edition on Isolation and Switching. AC-3 rated triple pole contactors with IP20 terminals and triple pole AC-3 rated switch disconnector with IP20 terminals fitted as standard. The disconnector has provision for up to 3 padlocks (locakble in the 'off' position). The mushroom headed 'Stop' pushbutton is IP65 with the 'Forward and Reverse' pushbuttons having an IP65 flush operator, both have IP20 terminals. Manufactured using readily available Moeller components which comply with the following specifications: isolator: IEC 943-3, pushbuttons: IEC 947-5-1, contactors: IEC 947-4-1. The enclosure is pre-wired to accept the Moeller Z00 or ZB thermal overloads which offer single phasing sensitivity to IEC 947-4. Reversing starters comprise of an enclosure, switch disconnector, stop, forward and reverse pushbuttons, two contactors and a mechanical interlock. Overload relay is not supplied and must be ordered separately Fitted with 4x25mm and 2x32mm knockouts H184 x W284 x D184mm Note FLC figures quoted are maximum, other overload ratings can be used dependent on FLC rating. The starters which use the X Start range of components are not compatible with DILM components.

Product Detail

New items

1SAM250000R1009, ABB

Starters Covers motors up to 16A (7.5kW) Local isolator Protects against overloads, short circuits, phase failure and faults in cabling or wiring These Motor Starters can be used in conjunction with ABB Contactors, stock no. 445-0897 typically Accessories available from auxiliary/signal contacts to under voltage releases. Using an adaptor, motor starter combinations can be easily formed utilising contactors from ABB's mini and A series range; see typically 445-0897 and 445-0825 Technical Specification Rated Current 0.1 to 1.6A (11 ranges) Width 45mm Rated operating voltage 690Vac /440Vdc Tripping Class 10/10A Rated short circuit breaking capacity Ics at 400 Vac, 16A 10kA Mechanical lifetime 100.000 switches Line Drawing Key PSI Phase busses S1-M1 Infeed block, flat S1-M2 Infeed block, high SK1 Signal contacts for lateral mounting HK1 Auxiliary contacts for lateral mounting HKF-11 Auxiliary contacts for front mounting UA1 Undervoltage release SA1 Locking device BEA7/16 Mounting adaptor for mini contactors BEA16/116 Mounting adaptor for A9-A16 contactors Standards IEC 60 947-1/IEC 60 947-2/EN60 P47-1/EN60 (47-2) Approvals UL, CSA

Product Detail

New items

1SAM250000R1003, ABB

Starters Covers motors up to 16A (7.5kW) Local isolator Protects against overloads, short circuits, phase failure and faults in cabling or wiring These Motor Starters can be used in conjunction with ABB Contactors, stock no. 445-0897 typically Accessories available from auxiliary/signal contacts to under voltage releases. Using an adaptor, motor starter combinations can be easily formed utilising contactors from ABB's mini and A series range; see typically 445-0897 and 445-0825 Technical Specification Rated Current 0.1 to 1.6A (11 ranges) Width 45mm Rated operating voltage 690Vac /440Vdc Tripping Class 10/10A Rated short circuit breaking capacity Ics at 400 Vac, 16A 10kA Mechanical lifetime 100.000 switches Line Drawing Key PSI Phase busses S1-M1 Infeed block, flat S1-M2 Infeed block, high SK1 Signal contacts for lateral mounting HK1 Auxiliary contacts for lateral mounting HKF-11 Auxiliary contacts for front mounting UA1 Undervoltage release SA1 Locking device BEA7/16 Mounting adaptor for mini contactors BEA16/116 Mounting adaptor for A9-A16 contactors Approvals UL, CSA Standards IEC 60 947-1/IEC 60 947-2/EN60 P47-1/EN60 (47-2)

Product Detail

New items

1SAM250000R1008, ABB

Starters Covers motors up to 16A (7.5kW) Local isolator Protects against overloads, short circuits, phase failure and faults in cabling or wiring These Motor Starters can be used in conjunction with ABB Contactors, stock no. 445-0897 typically Accessories available from auxiliary/signal contacts to under voltage releases. Using an adaptor, motor starter combinations can be easily formed utilising contactors from ABB's mini and A series range; see typically 445-0897 and 445-0825 Technical Specification Rated Current 0.1 to 1.6A (11 ranges) Width 45mm Rated operating voltage 690Vac /440Vdc Tripping Class 10/10A Rated short circuit breaking capacity Ics at 400 Vac, 16A 10kA Mechanical lifetime 100.000 switches Line Drawing Key PSI Phase busses S1-M1 Infeed block, flat S1-M2 Infeed block, high SK1 Signal contacts for lateral mounting HK1 Auxiliary contacts for lateral mounting HKF-11 Auxiliary contacts for front mounting UA1 Undervoltage release SA1 Locking device BEA7/16 Mounting adaptor for mini contactors BEA16/116 Mounting adaptor for A9-A16 contactors Approvals UL, CSA Standards IEC 60 947-1/IEC 60 947-2/EN60 P47-1/EN60 (47-2)

Product Detail

New items

RS_725-5529, Lovato

Enclosed Direct-on-line Motor Starters A range of enclosed Direct-On-Line motor starters which combine high performance and low cost. The range includes options with and without isolator and support for motors from 5.5 kW to 11 kW. Moulded plastic case providing IP65 ingress protection Compliant with standards IEC/EN 60947-1 and IEC/EN 60947-4-1 Operating temperature range -25°C → +60°C Range available with and without isolator Options without isolator have space to mount additional 17.5mm wide module - such as a timer, level control or monitoring relay Note Each starter is supplied WITHOUT an overload, therefore an appropriate overload must be selected from the RF38 overload series - for example stock no. 685-1309 - to match the motor FLC.

Product Detail

New items

RS_725-5513, Lovato

Enclosed Direct-on-line Motor Starters A range of enclosed Direct-On-Line motor starters which combine high performance and low cost. The range includes options with and without isolator and support for motors from 5.5 kW to 11 kW. Moulded plastic case providing IP65 ingress protection Compliant with standards IEC/EN 60947-1 and IEC/EN 60947-4-1 Operating temperature range -25°C → +60°C Range available with and without isolator Options without isolator have space to mount additional 17.5mm wide module - such as a timer, level control or monitoring relay Note Each starter is supplied WITHOUT an overload, therefore an appropriate overload must be selected from the RF38 overload series - for example stock no. 685-1309 - to match the motor FLC.

Product Detail

New items

SDAINLM55(110V50HZ120V60HZ), Eaton

Star Delta - Open Chassis Open chassis Star Delta starter for use within customised enclosures, enabling quick and easy installation and direct mounting onto 35mm DIN rail.,Manufactured using readily available Moeller components which conform to the latest IEC 947 standards and pre-wired to accept the Moeller Z00 or ZB thermal overloads which offer single phasing sensitivity to IEC 947-4.,Star Delta Open Chassis starters comprise of a Main, Delta and Star contactors, Star Delta timer (adjustable between 0 and 30 seconds) and circuit diagram. Overload relay is not supplied and must be ordered separately Manufacturer part numbers beginning with SDAINL 00AM , 0M , 0AM, 1M , M12 , M16 , M22 use ZB12 overloads (typical example stock no. 493-1239 ) Manufacturer part numbers beginning with SDAINL M30 , M45 and M55 use ZB32 overloads (typical example stock no. 493-1245 ) Terminal protection to IP20 Operating temperature range -25 to +40°C 7.5kW (SDAINL00AM) = H77 x W162 x D112mm 12.5kW & 18.5kW (SDAINL0M & SDAINL0AM) = H91 x W162 x D117mm 22kW (SDAINL1M) = H98 x W188 x D135mm 5.5 to 11kW (SDAINLM12 to SDAINLM22) = H68 x W158 x D125.2mm 15, 22 & 30kW (SDAINLM30 to SDAINLM55) = H85 x W158 x D147.3mm Note FLC figures quoted are maximum. The overload specified has been determined by applying the following formula: 0.58 x motor FLC.,Allow additional clearance dimensions for the wiring bar above and below the starter.,Thermal overload ZB12-16 is not currently stocked. The starters which use the X Start range of components are not compatible with DILM components.

Product Detail

New items

118529 | XDP5,5/ST(400V50HZ,440V60HZ), Eaton

D.O.L - Steel Enclosure IP55 sheet steel enclosed starter complete with isolator for DOL applications to comply with IEE Regulations, 16th Edition on Isolation and Switching. AC-3 rated triple pole contactor with IP20 terminals and triple pole AC-3 rated switch disconnector with IP20 terminals fitted as standard. The disconnector has provision for up to 3 padlocks. The mushroom headed 'Stop' pushbutton is IP65 with the 'Start' pushbutton having an IP65 flush operator, both have IP20 terminals. Manufactured using readily available Eaton components which comply with the following specifications: isolator: IEC 943-3, pushbuttons: IEC 947-5-1, contactor: IEC 947-4-1. The enclosure is pre-wired to accept the Eaton Z00 or ZB thermal overloads which offer single phasing sensitivity to IEC 947-4. DOL starters comprise of an enclosure, switch disconnector, stop and start pushbuttons and a contactor. Overload relay is not supplied and must be ordered separately Fitted with 4x20mm and 2x25mm knockouts H184 x W184 x D184mm Note FLC figures quoted are maximum, other overload ratings can be used dependent on FLC rating.

Product Detail

New items

118503 | D4E/I2/3P+N(230V50HZ,240V60HZ), Eaton

D4E/I2 Range IP65 protection rating Fitted DILEM contactor and RMQ push buttons Note An overload relay must be selected and fitted before the starter will function. For suitable overloads see stk no. 326-762 typically.

Product Detail

New items

XDP4/I(400V50HZ), Eaton

D.O.L - Insulated Totally Insulated enclosed starter complete with isolator for DOL applications to comply with IEE Regulations, 16th Edition on Isolation and Switching. The polycarbonate enclosure is IP65 with a light grey lid (RAL 7035) and black (RAL9005) base, fitted with AC-3 rated triple pole contactor, triple pole AC-3 rated switch disconnector and IP65 'On' and 'Off' Pushbuttons. The disconnector has the provision for up to 3 padlocks. The enclosure is pre-wired to accept the Moeller Z00 or ZB thermal overloads which offer single phasing sensitivity to IEC 947-4. Overload relay is not supplied and must be ordered separately Fitted with metric knockouts 4 & 5.5kW = H200 x W120 x D160mm, 7.5 & 11kW = H240 x W160 x D160mm Note FLC figures quoted are maximum, other overload ratings can be used dependant on FLC rating.

Product Detail