Electrolube 2 Part Thermal Bonding Epoxy
Two part, metal oxide loaded, thermal bonding system.
Can be used to bond heat sinks assemblies in "piggy back" arrangements, assembly of complex heat sink and as a bonding medium in surface mounting assemblies.
Excellent electrical insulation properties.
Solvent free system ensures that mated surfaces cannot come into contact, ensuring no electrical leakage through the bond.
Thin curing coating of approx 200 microns.
Bonds a wide range of surfaces; dissimilar metals, epoxies, acrylics, polycarbonates and so on.
Room temperature curing. Mix ratio 3 to 1. Usable life when mixed: 3 to 4 hours
Specific heat capacity: 0.5cal/g/°C @ 30°C resin, 0.35cal/g/°C @ 30°C hardener
Cure time: 8 to 12 hrs @Room Temp; Hard 48 hrs @Room Temp; Full Cure 45 mins @100°C
Tensile strength 2200N/cm² Resistivity 10
14
– 10
15
Ω cm
Thermal Adhesives/Compounds
