Featured Products
PSENbolt The PSENbolt from Pilz comprises of a handle and bolt to provide protection against failure and ma...
PNOZsigma series contact extension blocks Extension modules for PNOZ sigma series safety blocks. The extension bloc...
PSENmech Safety Switch The PSENmech from Pilz is a mechanical safety switch with separate actuator, suitabl...
PNOZsigma s5 Safety relay adapted for emergency stop pushbuttons, safety gates and light curtains Redundant...
PNOZ s6 and PNOZ s6.1 Safety Relays Safety relay for two-handed controls During dangerous movements, the relay requ...
PSENcode Compact Non-Contact Safety Switch, Coded The PSEN cs3.1 and PSEN cs3.1p safety switches are coded and only switch with an actuator from...
PSENcode Compact Non-Contact Safety Switch, Coded The PSEN cs3.1 and PSEN cs3.1p safety switches are coded...
PNOZmulti Mini Base Unit, Safety Controller The PNOZmulti Mini configurable safety relay from Pilz has an i...
PNOZ s6 and PNOZ s6.1 Safety Relays Safety relay for two-handed controls During dangerous movements, the re...
PNOZmulti Mini Base Unit, Safety Controller The PNOZmulti Mini configurable safety relay from Pilz has an i...
Popular Categories For Pilz
Popular Items
Popular items
Popular items
PSEN b1, Pilz
PSENbolt
The PSENbolt from Pilz comprises of a handle and bolt to provide protection against failure and manipulation in areas where safety gates are frequently opened and closed, or difficult to adjust.
Ready made solution comprising bolt and handle
Space saving due to compact design
Mechanical protection of the safety switch ensures long service life
Protection from manipulation and defeat in conjunction with the coded safety switch PSENcode
Suitable for use on left and right hand gates
Slot on bolt to allow a padlock to be fitted to to stop it being opened or closed unintentionally
Note
The PSEN b1 is without escape release and without locking pin. The PSEN b2 is with escape release and has a locking pin (which can be deactivated) to protect the bolt from closing unintentionally.
Popular items
PNOZ s8 24VDC 2 n/o, Pilz
PNOZsigma series contact extension blocks
Extension modules for PNOZ sigma series safety blocks.
The extension blocks provide reinforcement and increase the number of safety contacts on a base device.
The contact extension block expands an existing electrical circuit. Safety is still guaranteed, even if a component fails.
Removable terminals with connection via spring terminals.
DIN rail mounting.
Standards
EN 60947-5-1, EN 60204-1 VDE 0113-1
Popular items
PSEN me3.1/2AR, Pilz
PSENmech Safety Switch
The PSENmech from Pilz is a mechanical safety switch with separate actuator, suitable for mounting on safety guards. The interlock switch is triggered if the guards are opened, stopping any hazardous machine movement via a Pilz evaluation device.
Flexibility and speed during installation plus high plant availability
Compact design
Can be connected to all Pilz evaluation devices
Up to four horizontal and four vertical approach directions
Operating temperature -30 to +80°C
Screw terminals M20
Plastic bodied design
IP65 protection
Approvals
EC, BG, CCC, cCSAus
Standards
VDE 0660 T100, EN 60947-1, VDE 0660 T200, EN 60947-5-1, IEC 60947-5-1 GS-ET-19
Interlock Switch
Popular items
PNOZ s5 24VDC 2 n/o 2 n/o t, Pilz
PNOZsigma s5
Safety relay adapted for emergency stop pushbuttons, safety gates and light curtains
Redundant internal design with self-monitoring
Safety device remains active even if the component fails
Removable terminals with connection via spring terminals
Display LEDs for relay status
DIN rail mounting
1 solid state output
Standards
EN 60947-5-1, EN 60204-1 VDE 0113-1
Popular items
Popular items
PNOZ s6.1 24VDC 3 n/o 1 n/c, Pilz
PNOZ s6 and PNOZ s6.1 Safety Relays
Safety relay for two-handed controls
During dangerous movements, the relay requires the operator to keep both hands out of the danger zone
Applications: mechanical presses, hydraulic presses, safety control circuits
Removable terminals with connection via spring terminals
Display LEDs for relay status
DIN rail mounting
1 solid state output
Standards
EN574 IIIC (PNOZ s6); EN574 IIIA (PNOZ s6.1)
Popular items
PSEN cs3.1p, Pilz
PSENcode Compact Non-Contact Safety Switch, Coded
The PSEN cs3.1 and PSEN cs3.1p safety switches are coded and only switch with an actuator from the PSEN cs3.1 series. There is no restriction on the number of times the actuator can be used and reset.
Features and Benefits
Transponder technology for presence detection (safety function)
Coded switch
Dual-channel operation
2 safety inputs for series connection of multiple safety switches
2 safety outputs
1 signal output
LED display for state of the actuator, state of the inputs and supply voltage/fault
1 direction of actuation
IP69K protection
Stock no.
918-6655
has an M12 8 pole male connector
Stock no.
918-6664
has an M8 8 pole male connector
Approvals
CE, cULus Listed, TÜV, BG, CCC.
Caution
The safety level PLe (Cat. 4)/SIL CL 3 is only achieved if the safety outputs use 2-channel processing.
Standards
EN 60947-5-3 with the actuator PSEN cs3.1 PDDB; EN 62061 SIL CL 3; EN ISO 13849-1 PLe Cat. 4; EN ISO 14119 coding level Low, Type4.
Supplied with
Actuator.
Popular items
PSEN cs3.1 M12, Pilz
PSENcode Compact Non-Contact Safety Switch, Coded
The PSEN cs3.1 and PSEN cs3.1p safety switches are coded and only switch with an actuator from the PSEN cs3.1 series. There is no restriction on the number of times the actuator can be used and reset.
Features and Benefits
Transponder technology for presence detection (safety function)
Coded switch
Dual-channel operation
2 safety inputs for series connection of multiple safety switches
2 safety outputs
1 signal output
LED display for state of the actuator, state of the inputs and supply voltage/fault
1 direction of actuation
IP69K protection
Stock no.
918-6655
has an M12 8 pole male connector
Stock no.
918-6664
has an M8 8 pole male connector
Approvals
CE, cULus Listed, TÜV, BG, CCC.
Caution
The safety level PLe (Cat. 4)/SIL CL 3 is only achieved if the safety outputs use 2-channel processing.
Standards
EN 60947-5-3 with the actuator PSEN cs3.1 PDDB; EN 62061 SIL CL 3; EN ISO 13849-1 PLe Cat. 4; EN ISO 14119 coding level Low, Type4.
Supplied with
Actuator.
Popular items
PNOZ mm0.1p, Pilz
PNOZmulti Mini Base Unit, Safety Controller
The PNOZmulti Mini configurable safety relay from Pilz has an integral LCD display which provides status information and diagnostic messages. This safety controller has all the functions of the established PNOZmulti yet is only a space saving 45mm wide. A major advantage of the PNOZmulti Mini is that all required functions are configured directly via a PC running the PNOZmulti Configurator Software, instead of relying on wiring together different safety relays.
20 inputs
4 safe semiconductor outputs
4 test pulse outputs
LCD display for information and diagnostics
USB configuration interface
Can be configured using the PNOZmulti Configurator
Compatible with PNOZmulti
Approvals
UL/cUL, EC, TÜV, BG, CCC
Safety Controller
Popular items
PNOZ s6 48-240VACDC 3 n/o 1 n/c, Pilz
PNOZ s6 and PNOZ s6.1 Safety Relays
Safety relay for two-handed controls
During dangerous movements, the relay requires the operator to keep both hands out of the danger zone
Applications: mechanical presses, hydraulic presses, safety control circuits
Removable terminals with connection via spring terminals
Display LEDs for relay status
DIN rail mounting
1 solid state output
Standards
EN574 IIIC (PNOZ s6); EN574 IIIA (PNOZ s6.1)
Popular items
PNOZ mm0p 24VDC, Pilz
PNOZmulti Mini Base Unit, Safety Controller
The PNOZmulti Mini configurable safety relay from Pilz has an integral LCD display which provides status information and diagnostic messages. This safety controller has all the functions of the established PNOZmulti yet is only a space saving 45mm wide. A major advantage of the PNOZmulti Mini is that all required functions are configured directly via a PC running the PNOZmulti Configurator Software, instead of relying on wiring together different safety relays.
20 inputs
4 safe semiconductor outputs
4 test pulse outputs
LCD display for information and diagnostics
USB configuration interface
Can be configured using the PNOZmulti Configurator
Compatible with PNOZmulti
Approvals
UL/cUL, EC, TÜV, BG, CCC
Safety Controller
New Items
New items
New items
PNOZ X2 24VAC/DC 2n/o, Pilz
PNOZ X2 and X2.1, Dual Channel
Supply: 24Vdc at E-Stop pushbuttons
1 or 2 channel input
Feedback control loop for monitoring external relays/contactors
LED indication: power, Channel 1 and 2
Relay output: 2 N/O
Monitored manual reset
DIN rail mounting
Standards
BS EN 60204-1
New items
PNOZ s10 24VDC 4 n/o 1 n/c, Pilz
PNOZsigma series contact extension blocks
Extension modules for PNOZ sigma series safety blocks.
The extension blocks provide reinforcement and increase the number of safety contacts on a base device.
The contact extension block expands an existing electrical circuit. Safety is still guaranteed, even if a component fails.
Removable terminals with connection via spring terminals.
DIN rail mounting.
Standards
EN 60947-5-1, EN 60204-1 VDE 0113-1
New items
New items
PNOZ s5 24VDC 2 n/o 2 n/o t, Pilz
PNOZsigma s5
Safety relay adapted for emergency stop pushbuttons, safety gates and light curtains
Redundant internal design with self-monitoring
Safety device remains active even if the component fails
Removable terminals with connection via spring terminals
Display LEDs for relay status
DIN rail mounting
1 solid state output
Standards
EN 60947-5-1, EN 60204-1 VDE 0113-1
New items
PNOZ s8 24VDC 2 n/o, Pilz
PNOZsigma series contact extension blocks
Extension modules for PNOZ sigma series safety blocks.
The extension blocks provide reinforcement and increase the number of safety contacts on a base device.
The contact extension block expands an existing electrical circuit. Safety is still guaranteed, even if a component fails.
Removable terminals with connection via spring terminals.
DIN rail mounting.
Standards
EN 60947-5-1, EN 60204-1 VDE 0113-1
New items
570230, Pilz
PSENmech Safety Switch
The PSENmech from Pilz is a mechanical safety switch with separate actuator, suitable for mounting on safety guards. The interlock switch is triggered if the guards are opened, stopping any hazardous machine movement via a Pilz evaluation device.
Flexibility and speed during installation plus high plant availability
Compact design
Can be connected to all Pilz evaluation devices
Up to four horizontal and four vertical approach directions
Operating temperature -30 to +80°C
Screw terminals M20
Plastic bodied design
IP65 protection
Standards
VDE 0660 T100, EN 60947-1, VDE 0660 T200, EN 60947-5-1, IEC 60947-5-1 GS-ET-19
Approvals
EC, BG, CCC, cCSAus
Interlock Switch
New items
774709, Pilz
PNOZ X10, Dual Channel
Introducing the PNOZ X10 range of safety relay from the well-known brand PILZ, manufacturer of many safety related monitoring products. The PNOZ X10 range is the top of its class offering you different modes of operation including, single, automatic and dual channel functions. You will find that the PNOZ X10 has many different applications that you can use that offer you versatility in the face of machine safety.
Features and benefits
LED indicator statuses to support switching channel status between 1 or 2 signals & also for monitoring the supply voltage currently in the relay
Featuring 6 safety contacts (instantaneous) and 4 auxiliary contacts furthering the reliability of the machines safety output.
DIN rail mounting as standard
Single/Dual channel operation
Detection of short circuits across the contacts which can specifically detect earth faults and short circuiting.
Safety features
The circuit is redundant with built in self-monitoring
Safety functions remain effective in the case of a component failure
Correct opening and closing of the safety functions is tested automatically at the end of each of the relays on/off safety cycles.
Your X10 is short circuit proof, using an electronic fuse on a DC supply provides this reliability.
Applications
Emergency stop buttons
Safety gate limit switches
Reset buttons
Light barriers
Technical safety parameters
EN 60947-5-1
EN 60204-1
VDE 0113-1
New items
PSEN me3.1/2AR, Pilz
PSENmech Safety Switch
The PSENmech from Pilz is a mechanical safety switch with separate actuator, suitable for mounting on safety guards. The interlock switch is triggered if the guards are opened, stopping any hazardous machine movement via a Pilz evaluation device.
Flexibility and speed during installation plus high plant availability
Compact design
Can be connected to all Pilz evaluation devices
Up to four horizontal and four vertical approach directions
Operating temperature -30 to +80°C
Screw terminals M20
Plastic bodied design
IP65 protection
Approvals
EC, BG, CCC, cCSAus
Standards
VDE 0660 T100, EN 60947-1, VDE 0660 T200, EN 60947-5-1, IEC 60947-5-1 GS-ET-19
Interlock Switch
New items
PNOZ XV2 30/24VDC 2n/o 2n/o t, Pilz
PNOZ XV2 Safety Relay, Adjustable Time Delayed
The PNOZ XV2 safety relay provides a safety-related interruption of a safety circuit. It meets the requirements of EN 60947-5- 1, EN 60204-1 and VDE 0113-1.
Features and Benefits
Relay outputs, instantaneous 2 safety contacts (n/o), positive-guided
Relay outputs, delay-on re-energised: 2 safety contacts (n/o), positive-guided with adjustable or fixed delay-on de-energisation (dependent on unit)
LED for operating voltage, LED's for switching positions of all output relays and reset circuit
Connection for safety limit switches, E-stops, safety gate switches and for external reset buttons
Output circuit is redundant
Single or two channel operation
Feedback control loop for monitoring external contactors/relays
Prevents machine operation in the event of a power supply failure, component failure, coil defect in a relay, cable break and earth fault
DIN Rail mounted
Screw terminals
Applications
The PNOZ XV2 safety relay is used in applications with E-stops and safety gates.
Approvals
CE, cULus Listed, TÜV, KOSHA, CCC.
Standards
EN 60204-1, EN 62061, EN ISO 13849-1, VDE 0113-1, EN 60947-5-1.
New items
750106, Pilz
PNOZ s6 and PNOZ s6.1 Safety Relays
Safety relay for two-handed controls
During dangerous movements, the relay requires the operator to keep both hands out of the danger zone
Applications: mechanical presses, hydraulic presses, safety control circuits
Removable terminals with connection via spring terminals
Display LEDs for relay status
DIN rail mounting
1 solid state output
Standards
EN574 IIIC (PNOZ s6); EN574 IIIA (PNOZ s6.1)
New items
PNOZ s6.1 24VDC 3 n/o 1 n/c, Pilz
PNOZ s6 and PNOZ s6.1 Safety Relays
Safety relay for two-handed controls
During dangerous movements, the relay requires the operator to keep both hands out of the danger zone
Applications: mechanical presses, hydraulic presses, safety control circuits
Removable terminals with connection via spring terminals
Display LEDs for relay status
DIN rail mounting
1 solid state output
Standards
EN574 IIIC (PNOZ s6); EN574 IIIA (PNOZ s6.1)
Don’t hesitate to ask questions for better clarification.