Featured Products
PSENbolt The PSENbolt from Pilz comprises of a handle and bolt to provide protection against failure and ma...
PNOZsigma series contact extension blocks Extension modules for PNOZ sigma series safety blocks. The extension bloc...
PSENmech Safety Switch The PSENmech from Pilz is a mechanical safety switch with separate actuator, suitabl...
PNOZsigma s5 Safety relay adapted for emergency stop pushbuttons, safety gates and light curtains Redundant...
PNOZ s6 and PNOZ s6.1 Safety Relays Safety relay for two-handed controls During dangerous movements, the relay requ...
PSENcode Compact Non-Contact Safety Switch, Coded The PSEN cs3.1 and PSEN cs3.1p safety switches are coded and only switch with an actuator from...
PSENcode Compact Non-Contact Safety Switch, Coded The PSEN cs3.1 and PSEN cs3.1p safety switches are coded...
PNOZmulti Mini Base Unit, Safety Controller The PNOZmulti Mini configurable safety relay from Pilz has an i...
PNOZ s6 and PNOZ s6.1 Safety Relays Safety relay for two-handed controls During dangerous movements, the re...
PNOZmulti Mini Base Unit, Safety Controller The PNOZmulti Mini configurable safety relay from Pilz has an i...
Popular Categories For Pilz
Popular Items
Popular items
Popular items
PNOZ X2 24VAC/DC 2n/o, Pilz
PNOZ X2 and X2.1, Dual Channel
Supply: 24Vdc at E-Stop pushbuttons
1 or 2 channel input
Feedback control loop for monitoring external relays/contactors
LED indication: power, Channel 1 and 2
Relay output: 2 N/O
Monitored manual reset
DIN rail mounting
Standards
BS EN 60204-1
Popular items
PNOZ s10 24VDC 4 n/o 1 n/c, Pilz
PNOZsigma series contact extension blocks
Extension modules for PNOZ sigma series safety blocks.
The extension blocks provide reinforcement and increase the number of safety contacts on a base device.
The contact extension block expands an existing electrical circuit. Safety is still guaranteed, even if a component fails.
Removable terminals with connection via spring terminals.
DIN rail mounting.
Standards
EN 60947-5-1, EN 60204-1 VDE 0113-1
Popular items
Popular items
PNOZ s5 24VDC 2 n/o 2 n/o t, Pilz
PNOZsigma s5
Safety relay adapted for emergency stop pushbuttons, safety gates and light curtains
Redundant internal design with self-monitoring
Safety device remains active even if the component fails
Removable terminals with connection via spring terminals
Display LEDs for relay status
DIN rail mounting
1 solid state output
Standards
EN 60947-5-1, EN 60204-1 VDE 0113-1
Popular items
PNOZ s8 24VDC 2 n/o, Pilz
PNOZsigma series contact extension blocks
Extension modules for PNOZ sigma series safety blocks.
The extension blocks provide reinforcement and increase the number of safety contacts on a base device.
The contact extension block expands an existing electrical circuit. Safety is still guaranteed, even if a component fails.
Removable terminals with connection via spring terminals.
DIN rail mounting.
Standards
EN 60947-5-1, EN 60204-1 VDE 0113-1
Popular items
772171, Pilz
PNOZmulti 2 Motion Monitoring Modules
The PNOZ m EF *MM expansion module connects to a base unit from the PNOZmulti 2 configurable control system. Two models are available: PNOZ m EF 1MM provides safe monitoring of one axis and PNOZ m EF 2MM provides safe monitoring of two independent axes.
Features and Benefits
Can be configured in the PNOZmulti Configurator
Monitoring of 1 axis, stock no.
918-6617
Monitoring of two independent axes, stock no.
918-6611
Measured value recorded by proximity switch and encoder
LED display for supply voltage, diagnostics, axis status and errors
Support the safe drive function in accordance with EN 61800-5-2
Applications
Safe speed monitoring (SSM)
Safe speed range monitoring (SSRM)
Safe direction of movement monitoring (SDIM)
Safe operating stop monitoring (SOSM)
Analogue voltage (track S)
Standards
EN ISO 13849-1 PLe; EN ISO 13849-1 Cat. 4; EN IEC 62061 SIL CL 3; IEC 61511 SIL 3.
Approvals
CE, cULus Listed, TÜV, BG, CCC.
Supplied with
Screw terminals.
Safety Controller
Popular items
540080, Pilz
PSENcode Large Actuator
The PSEN cs1.1 1 actuator is designed for use with the PSENcode large design non-contact safety switches.
Features and Benefits
Transponder technology
Large design
IP6K9K protection
Approvals
CE, cULus Listed, TÜV.
Popular items
542000, Pilz
PSENcode Slim Non-Contact Safety Switch, Coded
The PSEN cs5.11 and PSEN cs5.1p safety switches are coded and only switch when used with an actuator from the PSEN cs1.1 series. There is no restriction on the number of times the actuator can be used and reset.
Features and Benefits
Transponder technology for presence detection
Coded switch
Dual-channel operation
2 safety inputs for series connection of multiple safety switches
2 safety outputs
Safety Device Diagnostics (SDD)
Safety Device Diagnostics can be used to poll sensor information, to perform actions and to read configuration parameters
Diagnostic input for Y1 for Safety Device Diagnostics (SDD)
Signal output/diagnostic output Y32 for Safety Device Diagnostics
LED display for state of actuator detection, state of the inputs and supply voltage/fault
IP66 / IP67 protection
PSEN cs5.11 (stock no.
918-6667
)
1 actuation direction with 3 approach directions: square marking for normal operating distance
M12 8 pole male connector
30 N holding force
PSEN cs5.1p (stock no.
918-6661
)
4 actuation directions, each with 3 approach directions: square marking for normal operating distance and triangle marking for short operating distance
M8 8 pole male connector
Caution
The safety level PLe (Cat. 4)/SIL CL 3 is only achieved if the safety outputs use 2-channel processing.
Standards
EN 60947-5-3; EN 62061 SIL CL 3; EN ISO 13849-1 PLe Cat. 4; EN ISO 14119 Coding level Low, Type4.
Approvals
CE, TÜV, UL/cUL, FCC, IC, ECOLAB.
Supplied with
Actuator.
Popular items
570230, Pilz
PSENmech Safety Switch
The PSENmech from Pilz is a mechanical safety switch with separate actuator, suitable for mounting on safety guards. The interlock switch is triggered if the guards are opened, stopping any hazardous machine movement via a Pilz evaluation device.
Flexibility and speed during installation plus high plant availability
Compact design
Can be connected to all Pilz evaluation devices
Up to four horizontal and four vertical approach directions
Operating temperature -30 to +80°C
Screw terminals M20
Plastic bodied design
IP65 protection
Standards
VDE 0660 T100, EN 60947-1, VDE 0660 T200, EN 60947-5-1, IEC 60947-5-1 GS-ET-19
Approvals
EC, BG, CCC, cCSAus
Interlock Switch
Popular items
774709, Pilz
PNOZ X10, Dual Channel
Introducing the PNOZ X10 range of safety relay from the well-known brand PILZ, manufacturer of many safety related monitoring products. The PNOZ X10 range is the top of its class offering you different modes of operation including, single, automatic and dual channel functions. You will find that the PNOZ X10 has many different applications that you can use that offer you versatility in the face of machine safety.
Features and benefits
LED indicator statuses to support switching channel status between 1 or 2 signals & also for monitoring the supply voltage currently in the relay
Featuring 6 safety contacts (instantaneous) and 4 auxiliary contacts furthering the reliability of the machines safety output.
DIN rail mounting as standard
Single/Dual channel operation
Detection of short circuits across the contacts which can specifically detect earth faults and short circuiting.
Safety features
The circuit is redundant with built in self-monitoring
Safety functions remain effective in the case of a component failure
Correct opening and closing of the safety functions is tested automatically at the end of each of the relays on/off safety cycles.
Your X10 is short circuit proof, using an electronic fuse on a DC supply provides this reliability.
Applications
Emergency stop buttons
Safety gate limit switches
Reset buttons
Light barriers
Technical safety parameters
EN 60947-5-1
EN 60204-1
VDE 0113-1
Popular items
774500, Pilz
PNOZ XV2 Safety Relay, Adjustable Time Delayed
The PNOZ XV2 range of safety relays from PILZ offers you safety and performance of a top branded safety relay all in one. The PNOZ XV2 offers you different modes of operation such as single or dual channel switches. Suitable for several different applications which are listed below.
Features and benefits:
DIN rail mounted with screw terminals
2 instantaneous delay-on re-energised safety contacts
LED operating voltage displayed alongside switching psitions and also the reset circuit
Connections built in for safety limit switches, e-stops and more
Single or dual channel operation
Simple and fast wiring saving you time, effort and money long term
Save costs when exchanging units (theres no need to rewire therefore you should eliminate potential wiring errors).
Electromechanical, potential-free
Safety features
The circuit is redundant with built-in self-monitoring.
The safety function remains effective in the case of a component failure.
The correct opening and closing of the safety function relays is tested automatically in each on-off cycle.
International certification
Faster commissioning and simple wiring through units with plug-in terminals
High plant availability and short downtimes thanks to a convenient diagnostic options on the device
Applications
E-STOP pushbuttons
Safety gate limit switches
Reset buttons
Technical safety parameters
EN 60947-5-1
EN 60204-1
VDE 0113-1
Standards
EN 60204-1, EN 62061, EN ISO 13849-1, VDE 0113-1, EN 60947-5-1.
Approvals
CE, cULus Listed, TÜV, KOSHA, CCC.
New Items
New items
New items
PNOZ X2 24VAC/DC 2n/o, Pilz
PNOZ X2 and X2.1, Dual Channel
Supply: 24Vdc at E-Stop pushbuttons
1 or 2 channel input
Feedback control loop for monitoring external relays/contactors
LED indication: power, Channel 1 and 2
Relay output: 2 N/O
Monitored manual reset
DIN rail mounting
Standards
BS EN 60204-1
New items
PNOZ s10 24VDC 4 n/o 1 n/c, Pilz
PNOZsigma series contact extension blocks
Extension modules for PNOZ sigma series safety blocks.
The extension blocks provide reinforcement and increase the number of safety contacts on a base device.
The contact extension block expands an existing electrical circuit. Safety is still guaranteed, even if a component fails.
Removable terminals with connection via spring terminals.
DIN rail mounting.
Standards
EN 60947-5-1, EN 60204-1 VDE 0113-1
New items
New items
PNOZ s5 24VDC 2 n/o 2 n/o t, Pilz
PNOZsigma s5
Safety relay adapted for emergency stop pushbuttons, safety gates and light curtains
Redundant internal design with self-monitoring
Safety device remains active even if the component fails
Removable terminals with connection via spring terminals
Display LEDs for relay status
DIN rail mounting
1 solid state output
Standards
EN 60947-5-1, EN 60204-1 VDE 0113-1
New items
PNOZ s8 24VDC 2 n/o, Pilz
PNOZsigma series contact extension blocks
Extension modules for PNOZ sigma series safety blocks.
The extension blocks provide reinforcement and increase the number of safety contacts on a base device.
The contact extension block expands an existing electrical circuit. Safety is still guaranteed, even if a component fails.
Removable terminals with connection via spring terminals.
DIN rail mounting.
Standards
EN 60947-5-1, EN 60204-1 VDE 0113-1
New items
772171, Pilz
PNOZmulti 2 Motion Monitoring Modules
The PNOZ m EF *MM expansion module connects to a base unit from the PNOZmulti 2 configurable control system. Two models are available: PNOZ m EF 1MM provides safe monitoring of one axis and PNOZ m EF 2MM provides safe monitoring of two independent axes.
Features and Benefits
Can be configured in the PNOZmulti Configurator
Monitoring of 1 axis, stock no.
918-6617
Monitoring of two independent axes, stock no.
918-6611
Measured value recorded by proximity switch and encoder
LED display for supply voltage, diagnostics, axis status and errors
Support the safe drive function in accordance with EN 61800-5-2
Applications
Safe speed monitoring (SSM)
Safe speed range monitoring (SSRM)
Safe direction of movement monitoring (SDIM)
Safe operating stop monitoring (SOSM)
Analogue voltage (track S)
Standards
EN ISO 13849-1 PLe; EN ISO 13849-1 Cat. 4; EN IEC 62061 SIL CL 3; IEC 61511 SIL 3.
Approvals
CE, cULus Listed, TÜV, BG, CCC.
Supplied with
Screw terminals.
Safety Controller
New items
540080, Pilz
PSENcode Large Actuator
The PSEN cs1.1 1 actuator is designed for use with the PSENcode large design non-contact safety switches.
Features and Benefits
Transponder technology
Large design
IP6K9K protection
Approvals
CE, cULus Listed, TÜV.
New items
542000, Pilz
PSENcode Slim Non-Contact Safety Switch, Coded
The PSEN cs5.11 and PSEN cs5.1p safety switches are coded and only switch when used with an actuator from the PSEN cs1.1 series. There is no restriction on the number of times the actuator can be used and reset.
Features and Benefits
Transponder technology for presence detection
Coded switch
Dual-channel operation
2 safety inputs for series connection of multiple safety switches
2 safety outputs
Safety Device Diagnostics (SDD)
Safety Device Diagnostics can be used to poll sensor information, to perform actions and to read configuration parameters
Diagnostic input for Y1 for Safety Device Diagnostics (SDD)
Signal output/diagnostic output Y32 for Safety Device Diagnostics
LED display for state of actuator detection, state of the inputs and supply voltage/fault
IP66 / IP67 protection
PSEN cs5.11 (stock no.
918-6667
)
1 actuation direction with 3 approach directions: square marking for normal operating distance
M12 8 pole male connector
30 N holding force
PSEN cs5.1p (stock no.
918-6661
)
4 actuation directions, each with 3 approach directions: square marking for normal operating distance and triangle marking for short operating distance
M8 8 pole male connector
Caution
The safety level PLe (Cat. 4)/SIL CL 3 is only achieved if the safety outputs use 2-channel processing.
Standards
EN 60947-5-3; EN 62061 SIL CL 3; EN ISO 13849-1 PLe Cat. 4; EN ISO 14119 Coding level Low, Type4.
Approvals
CE, TÜV, UL/cUL, FCC, IC, ECOLAB.
Supplied with
Actuator.
New items
570230, Pilz
PSENmech Safety Switch
The PSENmech from Pilz is a mechanical safety switch with separate actuator, suitable for mounting on safety guards. The interlock switch is triggered if the guards are opened, stopping any hazardous machine movement via a Pilz evaluation device.
Flexibility and speed during installation plus high plant availability
Compact design
Can be connected to all Pilz evaluation devices
Up to four horizontal and four vertical approach directions
Operating temperature -30 to +80°C
Screw terminals M20
Plastic bodied design
IP65 protection
Standards
VDE 0660 T100, EN 60947-1, VDE 0660 T200, EN 60947-5-1, IEC 60947-5-1 GS-ET-19
Approvals
EC, BG, CCC, cCSAus
Interlock Switch
New items
774709, Pilz
PNOZ X10, Dual Channel
Introducing the PNOZ X10 range of safety relay from the well-known brand PILZ, manufacturer of many safety related monitoring products. The PNOZ X10 range is the top of its class offering you different modes of operation including, single, automatic and dual channel functions. You will find that the PNOZ X10 has many different applications that you can use that offer you versatility in the face of machine safety.
Features and benefits
LED indicator statuses to support switching channel status between 1 or 2 signals & also for monitoring the supply voltage currently in the relay
Featuring 6 safety contacts (instantaneous) and 4 auxiliary contacts furthering the reliability of the machines safety output.
DIN rail mounting as standard
Single/Dual channel operation
Detection of short circuits across the contacts which can specifically detect earth faults and short circuiting.
Safety features
The circuit is redundant with built in self-monitoring
Safety functions remain effective in the case of a component failure
Correct opening and closing of the safety functions is tested automatically at the end of each of the relays on/off safety cycles.
Your X10 is short circuit proof, using an electronic fuse on a DC supply provides this reliability.
Applications
Emergency stop buttons
Safety gate limit switches
Reset buttons
Light barriers
Technical safety parameters
EN 60947-5-1
EN 60204-1
VDE 0113-1
New items
774500, Pilz
PNOZ XV2 Safety Relay, Adjustable Time Delayed
The PNOZ XV2 range of safety relays from PILZ offers you safety and performance of a top branded safety relay all in one. The PNOZ XV2 offers you different modes of operation such as single or dual channel switches. Suitable for several different applications which are listed below.
Features and benefits:
DIN rail mounted with screw terminals
2 instantaneous delay-on re-energised safety contacts
LED operating voltage displayed alongside switching psitions and also the reset circuit
Connections built in for safety limit switches, e-stops and more
Single or dual channel operation
Simple and fast wiring saving you time, effort and money long term
Save costs when exchanging units (theres no need to rewire therefore you should eliminate potential wiring errors).
Electromechanical, potential-free
Safety features
The circuit is redundant with built-in self-monitoring.
The safety function remains effective in the case of a component failure.
The correct opening and closing of the safety function relays is tested automatically in each on-off cycle.
International certification
Faster commissioning and simple wiring through units with plug-in terminals
High plant availability and short downtimes thanks to a convenient diagnostic options on the device
Applications
E-STOP pushbuttons
Safety gate limit switches
Reset buttons
Technical safety parameters
EN 60947-5-1
EN 60204-1
VDE 0113-1
Standards
EN 60204-1, EN 62061, EN ISO 13849-1, VDE 0113-1, EN 60947-5-1.
Approvals
CE, cULus Listed, TÜV, KOSHA, CCC.
Don’t hesitate to ask questions for better clarification.